[HTC ONE M7] Collection of Firmware up to 6.06.401.1 modified HBOOT, (No Red warning)

What is the Model ID of your HTC One?

  • Total voters
    3,288
Search This thread
By:
Advanced…
Sheetzie03

Sheetzie03

Senior Member
Feb 23, 2011
3,614
1,464
Pennsylvania
Google Pixel 7
Google Pixel 7 Pro
Hello all. Iv just recently S-off'd and since then iv been switching between gpe and sense. Well I read that the newest firmware is sense only, so I'm confused as to what and what not to update based on whether I flash gpe or sense. I would really appreciate any advice from those who know much more than I know specifically about this. Thank in advance for any help.
 
struppex

struppex

Senior Member
Aug 22, 2012
91
36
Berlin
kingsnoopy said:
When i try this in bootloader my it says in CMD.....target reported max download size of 1514139648 bytes
error: cannot load C:\adb firware.zip

what is going wrong? Please help.
Click to expand...
Click to collapse

Have you got super cid 11111111? If not enter bootloader and type 'fastboot oem writecid 11111111' Then re-enter bootloader and type 'fastboot oem rebootRUU' Then your M 7 will restart and you'll see a silver HTC logo. Then type 'fastboot flash zip firmware.zip' and a few seconds later once again till it says finished. Then you can reboot your device.

Gesendet von meinem HTC One mit Tapatalk
 
  • Like
Reactions: shopsdesire
You must log in or register to reply here.

Similar threads

mike1986.
[ROM] Android Revolution HD 93.0 | High Quality & Performance | 7.19.401.30 | 5.0.2
Replies
90K
Views
13M
filuuu
filuuu
LlabTooFeR
[ROM] MaximusHD | 53.0.1 | Android 5.0.2 | Sense 6.0 | EYE | OTA | 7.19.401.22
Replies
9K
Views
3M
ze7zez
ze7zez
baadnewz
[ROM]InsertCoin M7 7.1.3 | Sense 7 Android L | Tweaks
Replies
14K
Views
2M
N
ngocanh3996
Ajthescot
  • Locked
[ROM] 09/03 TrickDroid for the HTC One -
Replies
20K
Views
2M
O_G
O_G
mike1986.
HTC One firmware collection for different CID/MID | 7.19.401.2
Replies
3K
Views
744K
E
Emerald_N8

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 657
    jolishj
    jolishj
    Hi Everyone,


    OP UPDATE: DON'T reboot your device until you get a success message, also double check you understand EVERY STEPS before trying it out. I AM NOT RESPONSIBLE FOR ANYTHING IF YOU MESS UP THE STEPS...!!

    This firmware is WITH OUT the development disclaimer overlay:

    This build is for
    development purposes only
    Do not distribute outside of HTC
    without HTC's written permission.
    Failure to comply may
    lead to legal action.​

    ** With Latest Radio **

    Upgrade your HTC Sync to 3.1.13.0 if you flash this firmware..


    DOWNLOAD Firmware 6.06.401.1, NO Red Warning, --md5: -- dd9f5fb8416de0fb6f533ce3e40bbafe

    These Firmwares DO NOT delete the contents in SD Card. But please make a back up before flashing for safety.

    **N.B. Thanks and Donations are most welcome ** :p



    Requirements for flashing: S-OFF

    • Please Follow the instructions carefully!! Otherwise you may BRICK your device.
    • Please note that it is for the HTC One M7 UL Only. Not Tested with Sprint Version!!
    • You may change the MID (at your own risk) in the android-info.txt attached and replace the one inside the firmware.zip if you have another MID.
    • If you have Super CID "11111111", you don't need to worry about the CID lists inside the android-info.txt file
    ​

    DON'T FORGET TO CLICK THANKS IF YOU FIND THIS THREAD USEFUL. :p


    Dear All,

    I have noted a lot downloads of the firmware and most of them just don't even bother clicking thanks :silly:

    I appreciate your encouragements and appreciation for my work so that it will give motivation to keep all you updated.

    Thanks a lot for everyone contributed..

    :p

    Thanks @thoughtlesskyle for this video tutorial http://youtu.be/ybu7fZa41so

    ​


    To Check ModelIDs:

    Code: 
    adb reboot bootloader
    ----- Mobile reboots---

    Code: 
    fastboot getvar all
    ----Check the following line in the command window: INFOmodelid: PN0714000----


    Steps for flashing:

    -----

    Windows users, need to do these steps first:
    - move the file you downloaded and renamed (firmware.zip) to the C:\adb\ folder.
    - next, in the C:\adb\ folder hold down SHIFT key and RIGHT-CLICK and select "Open command window here".

    -----

    Next, plug in phone to PC and type this in terminal/command prompt:

    Code: 
    adb reboot bootloader
    ----- Mobile reboots---

    Now type:

    Code: 
    fastboot reboot-bootloader
    After that, type:

    Code: 
    fastboot oem rebootRUU 

Note: You should see a silver HTC logo come up on your phone after executing this command.
Note: if this command freezes,  just disconnect the USB cable and hold the power and volume down buttons until the device reboots. Then, repeat the steps above again.
    Finally:

    Code: 
     fastboot flash zip C:\adb\firmware.zip
    Got this:

    Code: 
          sending 'zip' (30367 KB)... OKAY [  6.184s]
                 writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOstart image[hboot] unzipping for pre-update check...
INFOstart image[hboot] flushing...
INFO[RUU]WP,hboot,0
INFO[RUU]WP,hboot,99
INFO[RUU]WP,hboot,100
INFO...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 8.090s

    Repeat the same command: !! IMPORTANT !! -- PLEASE WAIT A FEW SECONDS BEFORE ISSUING THE COMMAND AGAIN; Otherwise the cmd prompt will be non-responsive saying "Sending data...", If this happens, try disconnecting the USB cable and reconnect.

    Code: 
     fastboot flash zip C:\adb\firmware.zip
    You will see this:

    Code: 
          sending 'zip' (30367 KB)... OKAY [  3.277s]
                 writing 'zip'... INFOzip header checking...
INFOzip info parsing...
INFOchecking model ID...
INFOchecking custom ID...
INFOstart image[adsp] unzipping & flushing...
INFO[RUU]UZ,adsp,0
INFO[RUU]UZ,adsp,18
INFO[RUU]UZ,adsp,30
INFO[RUU]UZ,adsp,41
INFO[RUU]UZ,adsp,52
INFO[RUU]UZ,adsp,64
INFO[RUU]UZ,adsp,75
INFO[RUU]UZ,adsp,86
INFO[RUU]UZ,adsp,97
INFO[RUU]UZ,adsp,100
INFO[RUU]WP,adsp,0
INFO[RUU]WP,adsp,100
INFO...... Successful
INFOstart image[cir] unzipping & flushing...
INFO[RUU]UZ,cir,0
INFO[RUU]UZ,cir,100
INFO...... Successful
INFOstart image[pg2fs_spcustom] unzipping & flushing...
INFO[RUU]UZ,pg2fs_spcustom,0
INFO[RUU]UZ,pg2fs_spcustom,31
INFO[RUU]UZ,pg2fs_spcustom,57
INFO[RUU]UZ,pg2fs_spcustom,82
INFO[RUU]UZ,pg2fs_spcustom,100
INFO...... Successful
INFOstart image[rpm] unzipping & flushing...
INFO[RUU]UZ,rpm,0
INFO[RUU]UZ,rpm,100
INFO[RUU]WP,rpm,0
INFO[RUU]WP,rpm,100
INFO...... Successful
INFOstart image[sbl1-1] unzipping & flushing...
INFO[RUU]UZ,sbl1-1,0
INFO[RUU]UZ,sbl1-1,100
INFOsignature checking...
INFOverified fail
INFO..... Bypassed
INFOstart image[sbl1-2] unzipping & flushing...
INFO[RUU]UZ,sbl1-2,0
INFO[RUU]UZ,sbl1-2,100
INFOsignature checking...
INFOverified fail
INFO..... Bypassed
INFOstart image[sbl1-3] unzipping & flushing...
INFO[RUU]UZ,sbl1-3,0
INFO[RUU]UZ,sbl1-3,100
INFOsignature checking...
INFO[RUU]WP,sbl1-3,0
INFO[RUU]WP,sbl1-3,100
INFO...... Successful
INFOstart image[sbl2] unzipping & flushing...
INFO[RUU]UZ,sbl2,0
INFO[RUU]UZ,sbl2,100
INFO[RUU]WP,sbl2,0
INFO[RUU]WP,sbl2,100
INFO...... Successful
INFOstart image[sbl3] unzipping & flushing...
INFO[RUU]UZ,sbl3,0
INFO[RUU]UZ,sbl3,100
INFO[RUU]WP,sbl3,0
INFO[RUU]WP,sbl3,100
INFO...... Successful
INFOstart image[tp] unzipping & flushing...
INFO[RUU]UZ,tp,0
INFO[RUU]UZ,tp,100
INFO..... Bypassed
INFOstart image[tp] unzipping & flushing...
INFO[RUU]UZ,tp,0
INFO[RUU]UZ,tp,100
INFO...... Successful
INFOstart image[tz] unzipping & flushing...
INFO[RUU]UZ,tz,0
INFO[RUU]UZ,tz,100
INFO[RUU]WP,tz,0
INFO[RUU]WP,tz,100
INFO...... Successful
INFOstart image[radio] unzipping & flushing...
INFO[RUU]UZ,radio,0
INFO[RUU]UZ,radio,6
INFO[RUU]UZ,radio,11
INFO[RUU]UZ,radio,17
INFO[RUU]UZ,radio,23
INFO[RUU]UZ,radio,28
INFO[RUU]UZ,radio,34
INFO[RUU]UZ,radio,40
INFO[RUU]UZ,radio,46
INFO[RUU]UZ,radio,52
INFO[RUU]UZ,radio,59
INFO[RUU]UZ,radio,69
INFO[RUU]UZ,radio,75
INFO[RUU]UZ,radio,81
INFO[RUU]UZ,radio,87
INFO[RUU]UZ,radio,92
INFO[RUU]UZ,radio,99
INFO[RUU]UZ,radio,100
INFO[RUU]WP,radio,0
INFO[RUU]WP,radio,23
INFO[RUU]WP,radio,46
INFO[RUU]WP,radio,69
INFO[RUU]WP,radio,92
INFO[RUU]WP,radio,100
INFO...... Successful
INFOstart image[rcdata] unzipping & flushing...
INFO[RUU]UZ,rcdata,0
INFO[RUU]WP,rcdata,0
INFO...... Successful
OKAY [ 54.864s]
finished. total time: 58.143s


    Note:The green bar on the phone may not go to 100% of the bar ... but If you see completed on your computer command window, wait for a few seconds and move on.

    Last Step:

    Code: 
    fastboot reboot
    Then I went back to the bootloader mode (after the phone reboots successfully):

    If Boot-Loop Occurs*:
    Code: 
    fastboot erase cache

    Restart in boot-loader to check whether everything is fine*:
    Code: 
    adb reboot bootloader
    --Phone reboots into bootloader--
    Code: 
    fastboot getvar all

    The resulting variable may look like this:
    Code: 
    INFOversion: 0.5
INFOversion-bootloader: 1.57.0000
INFOversion-baseband: 4T.28.3218.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 6.06.401.1
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: HT34LXXXXXXX
INFOimei: 
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0714000
INFOcidnum: HTC__001
INFObattery-status: good
INFObattery-voltage: 4259mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-01dc707e
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!

    Firmware 5.11.1540.9, NO Red Warning, --md5: -- 6734d095499a72519335bb894503708f

    Firmware 4.19.401.11, NO Red Warning, --md5: -- 8f3a59cdbcc84b9ff2319495eee6ae98

    Firmware 4.19.401.9, NO Red Warning, --md5: -- DE93220BEB19CA1FCB3FDF407F2B3D3F


    Firmware 4.19.401.8, NO Red Warning, --md5: 30772981922e19437085c92adbea9658 --

    Firmware 4.19.1540.4, NO Red Warning, --md5: 49dbb024b28a17383da35593d6cbc860 --



    Firmware 4.06.1540.3, NO Red Warning ** --md5: 227c88abad17dba0561a91ad6d353373 --


    Firmware 4.06.1540.2, NO Red Warning ** --md5: c9b68c6a17ae323112c99ce0550dba38 --

    Previous firmware with modified HBOOT,
    Firmware 3.62.401.1 with NO Red Warning     are below.

    Firmware 3.62.401.1 for MODEL ID: PN0710000 NO Red Warning --md5: 728e3dc18abde0fd10835376332f81ec --

    Firmware 3.62.401.1 for MODEL ID: PN0711000 NO Red Warning -- md5: 7fb62e47f347ae05baf4dd821b497752 --

    Firmware 3.62.401.1 for MODEL ID: PN0712000 NO Red Warning --md5: 7ab96062ff848550a45dd035967adc83 --

    Firmware 3.62.401.1 for MODEL ID: PN0713000 NO Red Warning -- md5: 6bcb6dd99da4d4c73a24725b814e161b --

    Firmware 3.62.401.1 for MODEL ID: PN0714000 NO Red Warning -- md5: 6b2d5bf151ddf6ebbb7c6303f6db1889 --

    Firmware 3.57.401.500 for MODEL ID: PN0714000

    Firmware 3.57.401.500 for MODEL ID: PN0713000

    Firmware 3.57.401.500 for MODEL ID: PN0712000

    Firmware 3.57.401.500 for MODEL ID: PN0710000


    Firmware 3.22.1540.1 : MODEL ID: PN0710000

    Firmware 2.24.401.1 : MODEL ID: PN0710000 for Android 4.2.2

    FIRMWARE FAQ:


    Q: Do I need S-OFF for firmware flashing?

    A: YES, It is a must.

    Q: Do I need to update my firmware?

    A: NO, but updating firmware ensures optimal phone performance.

    Q: Does it matter when I flash the firmware (before or after new ROM install)

    A: No.

    Q: Will updating the firmware erase my SD card or Apps?

    A: No, The firmware files provided here does not erase none of those.

    Q: If I only flash the ROM, will I get updated to the latest firmware?

    A: No. You must flash the firmware separate in most cases.

    Q: Can I install a UL edition firmware on a U edition phone?

    A: Yes (may be), but you won't have LTE or may experience some other incompatibilities.


    Possible Errors while flashing:
    If it says "FAILED" do not immediately reboot the device. If you reboot with a FAIL it could brick your device! Listed below error are safe to reboot:
    If you encounter one of them, you can just reboot. Nothing changes.
    - 12 signature fail (means a signed firmware package is required. This would only happen with S-ON phones though. but safe to reboot)
    - 23 parsing image fail (means something wrong with the image in the zip)
    - 32 header error (means the zip couldn’t be read and unzipped properly)
    - 41 Wrong Model ID (means the MODEL ID in the android-info.txt does not match with your device. you can reboot the device. You may change the MID manually in the android-info.txt at your own risk.)
    - 42 Wrong Customer ID (means you need to include the CID of your device in the android-info.txt or change the CID to superCID.)
    - 99 UNKOWN (is not yet clear but safe to reboot)

    DON'T reboot until you get a success message if you get an error bellow:
    - 90 hboot pre-update (means it only flashed hboot and you have to run the process again immediately to flash all other partitions. Don’t reboot before repeating the command.     If the command window stuck in the middle for a long time, wait for a few minutes and please unplug the USB and replug it again. Repeat the command again. DON'T reboot until you get a success message.)
    ​


    Editing android-info.txt​
    ​

    - Use an Editor that doesn't doesn't alter the linebreaks. Don't use Windows Notepad. Use Notepad++
    - Only one MID can be in the file.
    - CID's can easily be added or removed- one per line

    To Get SUPERCID​
    ​
    Code: 
    fastboot oem writecid 11111111

    RUUmode:​
    ​

    RUU Mode is the mode used for RUU flashes by HTC. It is different from the normal fastboot. You must flash the firmware only in RUU Mode. The RUU mode can be identified by the black background with only a silver HTC logo and if a command is being active a green progress bar will show the progress of any command being excecuted.

    For Further Reading​
    Some more useful threads that might be helpful to you:
    - Mike1986’s Firmware thread
    - Vomer’s ultimate guide thread
    - hes_theone64’s radio flash guide for recovery
    - chrisch1974's HOW-TO Flash a custom splash screen
    - Sneakyghost's Firmware Flashing & Hboots red warning gone thread
    - HTC ONE Partition List:
    - Mike1986 Partition explanation:


    ​

    You must be aware that writing to the bootloader -partition increases your risk to lose the device exponentially. You understand and agree that i cannot be held responsible for such or any other damages. The flash process is theoretically safe and tested. I will not accept any responsibility. The method itself is developed by Google and HTC, i have only adapted it and you execute it. You understand that you should not do it if you are not willing to accept this risk.​

    For More info, about Super CID, S-OFF and Firmware update process, check this thread:

    [Guide] Vomer's Ultimate AIO - S-OFF, SuperCID, Firmware Upgrade & Custom Recovery

    Thanks @vomer and @Sneakyghost
    View
    8
    kuchivas
    kuchivas
    The new firmware_6.06.401.1_hboot_remove_red_text. Only hboot
    Download here
    MD5: f8a11244a9d0e8e50b090438f762d411
    EDIT: full firmware 6.06.401.1 with text warning remove
    Download here
    MD5: 6923dfd6b53d69f4de0fc4a65d51bc6f
    View
    8
    jolishj
    jolishj
    Please comment and Click Thanks

    Dear All,

    I have noted a lot downloads of the firmware and most of them just don't even bother clicking thanks :silly:

    I appreciate your encouragements and appreciation for my work so that it will give motivation to keep all you updated.

    Thanks a lot for everyone contributed..

    :p
    View
    8
    Mikanoshi
    Mikanoshi
    shark147 said:
    I have removed "red warning" on new hboot from 4.19.401.11.
    Click to expand...
    Click to collapse
    I think there is a red dot left somehow in the end of a text :eek: Saw it while entering recovery
    P.S. This is a fixed one. No kernel and recovery, no red text:
    http://mikanoshi.name/share/fw_4.19.401.11_custom_noredtext.zip
    View
    7
    Jonny
    Jonny
    Attached is the modified hboot for the 3.62.401.1 firmware to remove the red text - tested and working.

    Link to firmware.zip >>> http://darkforest-roms.co.uk/Mods/3.62.401.1/firmware.zip

    MD5 CheckSum of firmware.zip: FE9F2A4DB13AD6CAC9F741D881CA7BA7
    View

New posts