Remove All Ads from XDA

Replacement Battery + Qi insert in original cover

68 posts
Thanks Meter: 14
By ajizle123, Member on 15th June 2014, 06:12 PM
Post Reply Email Thread
So there are a ton of threads on replacement batteries, but I couldn't find a specific answer to my question.

I want a replacement battery that fits with a Qi receiver under the original back cover plate. I've noticed replacement batteries are often thicker than OEM.

Currently: I have the original samsung battery + Nillkin Wireless Charging Receiver. I can fit both of these under the original back plate and in my TPU case. HOWEVER, when I put in my Anker 2600mAh will no longer fit. The Anker battery is actually thicker than the OEM battery...just enough to cause problems.

Anyone combine a replacement battery + Qi receiver and still fit it in the back plate?
17th June 2014, 11:57 AM |#2  
Senior Member
Thanks Meter: 19
buy the oem battery/pack from samsung website with the 50% code u get registering your phones serial total should be around $25 and just use it with the qi receiver ! i do this with my phone
18th June 2014, 02:35 AM |#3  
no_username_available's Avatar
Senior Member
Flag Toronto
Thanks Meter: 43
if you have a local market try there first, i got my s4 battery for 7$
20th June 2014, 04:27 PM |#4  
Senior Member
Thanks Meter: 44
I've had no luck with replacement batterys for my gs3. They never last close to OEM. Even the big ones don't last any longer. Have you looked into just getting the OEM Samsung wireless back cover instead of the insert. Sounds like that would solve your issues.
21st June 2014, 02:00 PM |#5  
kms108's Avatar
Senior Member
Thanks Meter: 1,098
Just get another OEM one as replacement battery and the qi receiver will work.
Post Reply Subscribe to Thread


Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes