FORUMS
Remove All Ads from XDA

[GUIDE] Z Ultra and Z1 HARD BRICK RECOVERY

509 posts
Thanks Meter: 995
 
By Doom Slayer, Senior Member on 13th February 2014, 12:15 AM
Post Reply Email Thread
2nd November 2014, 11:08 AM |#311  
Exaita's Avatar
Member
Flag Singapore
Thanks Meter: 8
 
Donate to Me
More
So i have a xperia z ultra that was given to me . I sent it to sony and they call back saying that i need to replace the mainboard as the software is modified(i trying to act dumb). I gave up on repairing it as i can buy a new phone for the price given. The phone was rooted to GPE so i was wondering if this method will work? I am kinda new to this so hope someone can guide me. Thanks
 
 
2nd November 2014, 12:33 PM |#312  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by the_laser

to be honest, i'm not understand anything

to fix phone with problem like yours , you need

1. restore security units
2. reflash phone fully ( APP + FSP firmware parts )
3. poweron phone, root phone, restore full trim area backup.
.

hi
i have a xperia z With unknown baseband
phone boot normal..
fatstboot OK
flashmod OK
i can backup ta.img
my phone dial *#06# no imei
flash with flashtools
flash with setools
and Sam error again
no imei
I attached my ta backup after get this error
can i repair this??
how to repair
please help me .... tanks
Attached Files
File Type: zip TA (2).zip - [Click for QR Code] (281.9 KB, 235 views)
3rd November 2014, 05:59 PM |#313  
Junior Member
Thanks Meter: 0
 
More
Battery Low S1Tool for MSM8274
I tried flashing a custom rom (pacman) over stock rom, and bricked my phone.
Its a Z1, C6902, but with MSM8274 chipset. I used your latest S1Tool and get this message

will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"

PROCESSING ...
SERIAL NUMBER : DD90FF01
HARDWARE ID : 04000100E1207B00
PRODUCT DETECTED: "MSM8274 OEM1 fused"
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC 31852330BDDB177
HARDWARE ID 04000100E1207B00 NOT SUPPORTED

Is there any chance you'll enhance this tool for this chipset support please ?
I'm sure many of us are in same boat .....
Any other way to recover ?
Symptoms are same Red LED lights up after 2-3 minutes, on connecting usb cable, and stays ON all time. Device manager reports unknown device normally, but upon testpoint grounding, SEMC flash is reflected.
Please help, much appreciated !!
Regards
7th November 2014, 03:55 PM |#314  
munjeni's Avatar
Senior Member
Thanks Meter: 21,266
 
Donate to Me
More
Tool for converting TA.img to TA_unbrick.SYN_FILE_SET

Since I bricked my TA I was not able to repair TA by using gdfs, do not know why, but I created tool for unbricking TA partition, TA backup is required to get tool working! Here is tool for all who have TA.img and bricked TA partition inside phone, tool will convert your TA.img to TA_unbrick.SIN_FILE_SET so you can easily repair your TA partition and flash the rest of firmware, enjoy! Windows machine is required!

How to use:
- put TA.img to the same folder
- run ta_gen.exe
Attached Files
File Type: zip ta_gen.zip - [Click for QR Code] (2.73 MB, 5148 views)
The Following 19 Users Say Thank You to munjeni For This Useful Post: [ View ] Gift munjeni Ad-Free
7th November 2014, 08:36 PM |#315  
Makiavell's Avatar
Senior Member
Thanks Meter: 59
 
More
Quote:
Originally Posted by munjeni

Since I bricked my TA I was not able to repair TA by using gdfs, do not know why, but I created tool for unbricking TA partition, TA backup is required to get tool working! Here is tool for all who have TA.img and bricked TA partition inside phone, tool will convert your TA.img to TA_unbrick.SIN_FILE_SET so you can easily repair your TA partition and flash the rest of firmware, enjoy! Windows 32 bit is required!

Amazin'! good job
11th November 2014, 08:53 AM |#316  
Junior Member
Thanks Meter: 0
 
More
Please Help me if somebody know to Fix
Hi, i'm from Indonesia.
i have hard bricked my Z ultra.
the root of my Zul bricked when i want to flash deodexed.
before i flash the zip , i wipe cache and instal it
after reboot my phone have boot loop , and i use Hard reset.
now my phone cant go to fashboot mode and flashtool
can't detect ADB.
so i can't fix this phone. I charging to wall charge 10+ hours, now i got LED RED not blinking.
i try to connect to PC but still can't flash the tft.

Please help me guys.

Regards,
Kevin
12th November 2014, 05:37 PM |#317  
munjeni's Avatar
Senior Member
Thanks Meter: 21,266
 
Donate to Me
More
@the_laser, which box I need to buy for jtag solution on msm8974 (xperia z1 compact), thx in advance!
13th November 2014, 06:02 PM |#318  
Junior Member
Thanks Meter: 0
 
More
I have the same problem with MSM8274 chipset, and is there any solution thanks
15th November 2014, 12:00 PM |#319  
inunxelex's Avatar
Senior Member
Thanks Meter: 134
 
More
Xperia M MSM8227
@the_laser, is updated s1tool support for MSM8227 ?
16th November 2014, 11:01 PM |#320  
Junior Member
Thanks Meter: 0
 
More
Question Stuck on PROCESSING: tz_S1_Boot_MSM8974
Hello there,

I have a C6806 Xperia Z Ultra, and one day, all applications on the phone started force closing. I turned the phone off and turned it back on, but now, it blinks red three times. I cannot get into fastboot or flash mode. I tried using this method to unbrick the phone, but I am stuck at "PROCESSING: tz_S1_Boot..." with "MINOR ERROR 0017". I am trying to flash the APP file inside the c6806.7z file. Full log is below. Any suggestions?

Code:
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
 
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
 
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
 
will use Sahara protocol ... 
REMOVE TESTPOINT NOW, THEN PRESS "READY"
 
PROCESSING ...
SERIAL NUMBER : 97A5F201
HARDWARE ID : 04000100E1007B00
HASH :49109A8016C239CD8F76540FE4D5138C87B2297E49C6B30EC31852330BDDB177
Emergency loader uploaded ...
 
RUNNING S1_PRELOADER VER "LOADER_RELEASE_MSM8974_23_4_AID_4"
LOADER AID: 0004
DEVICE ID: 01F2A597
FLASH ID: "0015/01000001"
LOADER VERSION: "LOADER_RELEASE_MSM8974_23_4_AID_4"
 
WRITING PACKAGES ...
Processing package
C:\Users\user\Downloads\tools\14_2_A_0_290.APP_SW_Togari_GENERIC_1271_5715_S1_SW_LIVE_6732_PID1_0005_MMC.SIN_FILE_SET
 
WILL UPDATE BOOT TO : 1270-3115 S1_BOOT_MSM8974_LA1.04_15
PARSING: "DEVELOPMENT"
value OTP_LOCK_STATUS_1 :  UNLOCKED, not match LOCKED
PARSING: "TEST_OEM0_007B00E1"
value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
value OTP_DATA_1 :  00000100, not match 01000400
value IDCODE_1 : 007B00E1, match 007B00E1
PARSING: "PRECOMMERCIAL_007B00E1"
value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
value OTP_DATA_1 : 01000400, match 01000400
value IDCODE_1 : 007B00E1, match 007B00E1
PROCESSING : dbi_S1_Boot_MSM8974_LA1_04_15_AID_4_S1-SDI2-6732-PID1-0004-SDI_S1-BOOT-6732-0004-MMC.sin
PROCESSING : emmc_appsboot_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID09-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
PROCESSING : s1sbl_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID65-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
PROCESSING : sbl1_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID00-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
PROCESSING : tz_S1_Boot_MSM8974_LA1_04_15_AID_4_PLATFORM-MSM8974-LIVE-HWID007B00E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT-6732-0004-MMC.sin
MINOR ERROR [ 0x801E003F_, err: 0017 ]
error while uploading final DATA block
Break.
FINISHED
Elapsed:82 secs.
17th November 2014, 08:55 PM |#321  
rafik23's Avatar
Senior Member
annaba
Thanks Meter: 55
 
More
Unhappy
@the_laser
i'm really glad for your work from 2006 , i thank you very much for your magic developpement
but is there any possibilty to add xperia m in s1tool ? i have hard brick xperia m and i use s1tool tel me this device is not supported
my device is in qsh usb load mode no flash mode no fastboot mode.

NB : xperia m is msm8227
Code:
17/11/2014 23:47:32 SELECT FIRMWARE PACKAGES
17/11/2014 23:47:32 YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
17/11/2014 23:47:33 CHECKING PACKAGES ...
17/11/2014 23:47:33  
17/11/2014 23:47:34 DETACH USB CABLE FROM PHONE
17/11/2014 23:47:34 REMOVE BATTERY FROM PHONE
17/11/2014 23:47:34 ATTACH TESTPOINT
17/11/2014 23:47:34 PRESS "READY", THEN ATTACH USB CABLE TO PHONE
17/11/2014 23:47:34  
17/11/2014 23:47:40 will use DLOAD protocol ... 
17/11/2014 23:47:40 0808010600900000
17/11/2014 23:47:40 0D0F50424C5F446C6F6164564552322E30
17/11/2014 23:47:40 162001000100
17/11/2014 23:47:40 17004001000100E1007D00
17/11/2014 23:47:40 18010025B44831AB8F8396568DBB0098465E11F8AD86A5266D657350351C3F4A206F3B
17/11/2014 23:47:41 PHONE NOT SUPPORTED IN THIS MODE
17/11/2014 23:47:41 Elapsed:8 secs.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes