FORUMS
Remove All Ads from XDA

HANNSpree HSG1279 root and recovery!!! [Updated 01/28/14]

309 posts
Thanks Meter: 70
 
Post Reply Email Thread
11th April 2015, 03:23 PM |#1031  
Senior Member
Thanks Meter: 68
 
More
Quote:
Originally Posted by b0joker

Worked perfect. Rookie mistake(on my part) thanks so much......

Sent from my SGH-T999L using xda premium

Sure glad I never make mistakes like that. How do you like AOKP? For me it seems snappier than stock. I had also tried the Cyanogenmod 11 port but it seemed rather buggy, apps force-closing for no apparent reason, the occasional spontaneous reboot, just seemed to be a bit unstable. Useable, you understand, just occasional problems. None of that with AOKP. @steve30x reported the latest Hannspree firmware faster than either, but I didn't notice that. I'll be sticking with AOKP unless something much better comes along like a Lollipop ROM, but that doesn't seem likely for this tablet.
 
 
11th April 2015, 03:38 PM |#1032  
b0joker's Avatar
Member
Flag Pleasant view
Thanks Meter: 6
 
Donate to Me
More
Quote:
Originally Posted by kevinthefixer

Sure glad I never make mistakes like that. How do you like AOKP? For me it seems snappier than stock. I had also tried the Cyanogenmod 11 port but it seemed rather buggy, apps force-closing for no apparent reason, the occasional spontaneous reboot, just seemed to be a bit unstable. Useable, you understand, just occasional problems. None of that with AOKP. @steve30x reported the latest Hannspree firmware faster than either, but I didn't notice that. I'll be sticking with AOKP unless something much better comes along like a Lollipop ROM, but that doesn't seem likely for this tablet.

A lot nicer. great response, lighter ROM, little to no lag. With cyanogenmod I had same issues you listed. This works good so far :thumbup:

Sent from my SGH-T999L using xda premium
16th April 2015, 10:50 AM |#1033  
CXZa's Avatar
Senior Member
Thanks Meter: 29
 
Donate to Me
More
Quote:
Originally Posted by Sparkrite

Hi CXZa,

Well, I finally worked up the courage to try your flash file and it worked perfectly!!
See Pic.

I would really appreciate it if you came up with some way of rooting this tablet as I reckon
I could speed it up ( for "speed" probably read "break") considerably with root permissions.

Thanking you in advance.

Okay, brave or not, here is the rooter package for Hannspad T74 (HSG1279-SN1AT74) (or any atm7029b kitkat?)
Besides installing su, it also installs some other programs that T74 doesn't have, needed or not (see readme.txt).
atm70xx-KK-Root_[cxz] https://yadi.sk/d/l3wpfD7-g2nTc
The unRoot package removes those files (see readme.txt).
atm70xx-KK-unRoot_[cxz] https://yadi.sk/d/RPThqoXhg2ukW

DebugEnabler that changes boot.img/default.prop ro.debuggable value to 1. So it enables "adb root" command.
Flash again and it restores the old boot.img.
atm70xx-KK-DebugEnabler_[cxz] https://yadi.sk/d/ASZJZ_s9fpvLi
(same signed for JellyBean if someone needs such https://yadi.sk/d/QFu-KojdfpvLv )

And as usual, no guarantee of any kind. Use at your own risk!

Tip: If you managed to root that tablet one way or other, and you want to edit /system/build.prop. Try using /data/local.prop instead of it.
Also /system/default.prop can be used. That way build.prop stays intact and updates should work, if your other
modifications don't cause it to fail. (Some build.prop properties cannot be changed later. )

edit: Above is SuperSU by Chainfire. Here is similar package with ClockworkMod SuperUser
http://forum.xda-developers.com/show...4#post60154424
The Following 2 Users Say Thank You to CXZa For This Useful Post: [ View ] Gift CXZa Ad-Free
16th April 2015, 02:43 PM |#1034  
Senior Member
Thanks Meter: 129
 
More
Quote:
Originally Posted by CXZa

Okay, brave or not, here is the rooter package for Hannspad T74 (HSG1279-SN1AT74) (or any atm7029b kitkat?)
Besides installing su, it also installs some other programs that T74 doesn't have, needed or not (see readme.txt).
atm70xx-KK-Root_[cxz] https://yadi.sk/d/l3wpfD7-g2nTc
The unRoot package removes those files (see readme.txt).
atm70xx-KK-unRoot_[cxz] https://yadi.sk/d/RPThqoXhg2ukW

DebugEnabler that changes boot.img/default.prop ro.debuggable value to 1. So it enables "adb root" command.
Flash again and it restores the old boot.img.
atm70xx-KK-DebugEnabler_[cxz] https://yadi.sk/d/ASZJZ_s9fpvLi
(same signed for JellyBean if someone needs such https://yadi.sk/d/QFu-KojdfpvLv )

And as usual, no guarantee of any kind. Use at your own risk!

Tip: If you managed to root that tablet one way or other, and you want to edit /system/build.prop. Try using /data/local.prop instead of it.
Also /system/default.prop can be used. That way build.prop stays intact and updates should work, if your other
modifications don't cause it to fail. (Some build.prop properties cannot be changed later. )

Hi CXZa,
Thank you VERY much for your time, we are getting VERY close to a successful root.

I applied the DeBugEnabler and then the Root zip which applied with a few errors(see attached pic) this gave me root privileges and I installed Super Su (chanfire) which I allowed to update the SU (maybe I shouldn't). The tablet was very unstable and froze repeatedly, practically unusable. I then tried Superuser app (clockworkmod) which again wanted to update the SU, but no way to do it except through a custom recovery.

I then tried to install the CWM recovery mentioned at the start of this thread which installed (via ADB shell) but did not work at all (dark blank screen becoming slowly brighter) but thanks to your Dumping util I was able to restore the ACTA block (phew!)

And so I installed the UNroot zip and the tablet is once again stable.
So as I say you are EXTREMELY close to a successful root.
Thank you again for your time and effort.

PS: after the errors on the pic it continued "successfully installed update".
Attached Thumbnails
Click image for larger version

Name:	Update sequence.jpg
Views:	210
Size:	269.7 KB
ID:	3265558  
The Following User Says Thank You to Sparkrite For This Useful Post: [ View ] Gift Sparkrite Ad-Free
16th April 2015, 03:20 PM |#1035  
CXZa's Avatar
Senior Member
Thanks Meter: 29
 
Donate to Me
More
Quote:
Originally Posted by Sparkrite

I applied the DeBugEnabler and then the Root zip which applied with a few errors(see attached pic) this gave me root privileges and I installed Super Su (chanfire) which I allowed to update the SU (maybe I shouldn't). The tablet was very unstable and froze repeatedly, practically unusable. I then tried Superuser app (clockworkmod) which again wanted to update the SU, but no way to do it except through a custom recovery.
.

Well, at least you got root for adb. What if you just use the same superuser that I left out from the package?
This one: https://yadi.sk/d/T93QxP0Nf8Wii Or should I add it to the zip?

Quote:
Originally Posted by Sparkrite

I then tried to install the CWM recovery mentioned at the start of this thread which installed (via ADB shell) but did not work at all (bright screen becoming slowly brighter) and thanks to your Dumping util I was able to restore the ACTA block (phew!)
.

Yep, CWM needs to be newer. If recovery is 4..2 it partly works but can "brick" the device according Slatedroid's "pulso".
And in your case if recovery doesn't work, it really might be true. Maybe not, but anyhow it isn't an easy task at the moment.
Unbricking, that is...
The Following User Says Thank You to CXZa For This Useful Post: [ View ] Gift CXZa Ad-Free
16th April 2015, 03:28 PM |#1036  
Senior Member
Thanks Meter: 129
 
More
Quote:
Originally Posted by CXZa

Well, at least you got root for adb. What if you just use the same superuser that I left out from the package?
This one: https://yadi.sk/d/T93QxP0Nf8Wii Or should I add it to the zip?
...

Yeah, I would appreciate if you added that superuser to the zip, please.

And that way I can try the "complete" package, so to speak.
16th April 2015, 03:28 PM |#1037  
Member
Flag Bac Lieu
Thanks Meter: 4
 
More
What "echo 144 ..." command for ?
16th April 2015, 03:54 PM |#1038  
CXZa's Avatar
Senior Member
Thanks Meter: 29
 
Donate to Me
More
Quote:
Originally Posted by Sparkrite

Yeah, I would appreciate if you added that superuser to the zip, please.

And that way I can try the "complete" package, so to speak.

Both Root and unRoot updated.
Those "error" messages cannot be avoided.
If you flash that 0202 update it most likely shows the same messages.
The Following User Says Thank You to CXZa For This Useful Post: [ View ] Gift CXZa Ad-Free
16th April 2015, 04:13 PM |#1039  
Senior Member
Thanks Meter: 129
 
More
Quote:
Originally Posted by CXZa

Both Root and unRoot updated.
Those "error" messages cannot be avoided.
If you flash that 0202 update it most likely shows the same messages.

Unfortunately its still the same CXZa, but in between freezes it is rooted .
16th April 2015, 04:39 PM |#1040  
CXZa's Avatar
Senior Member
Thanks Meter: 29
 
Donate to Me
More
Quote:
Originally Posted by Sparkrite

Unfortunately its still the same CXZa, but in between freezes it is rooted .

Both updated again. Now it installs just su and the app.
Use old unroot for removing the su etc. first. https://yadi.sk/d/cK2MzA10g3Uhg

Have you done factory reset after that su updating you allowed ?
16th April 2015, 05:05 PM |#1041  
Senior Member
Thanks Meter: 129
 
More
Quote:
Originally Posted by CXZa

Both updated again. Now it installs just su and the app.
Use old unroot for removing the su etc. first. https://yadi.sk/d/cK2MzA10g3Uhg

Have you done factory reset after that su updating you allowed ?

No, I didn't factory re-set anytime.
At what stage would you suggest I do it?
Tried the update with just the SU and app, still the same , unfortunately.

Is there anyway you could write a zip with the "ClockworkMod" SU and app and I'll try that as well, please?
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes