FORUMS
Remove All Ads from XDA

Willing to dump 1.90.401.1 WWE / Radio 1.02.25.19, Need some help

22 posts
Thanks Meter: 0
 
By darkvoid, Junior Member on 20th August 2008, 04:05 PM
Post Reply Email Thread
18th March 2009, 11:07 PM |#21  
When trying to dump the rom i get these errors.
Code:
C:\its>pdocread.exe -l
457.38M (0x1c960000) FLASHDR
|         124.00k (0x1f000) Part00
|           4.50M (0x480000) Part01
|         100.13M (0x6420000) Part02
|         354.00M (0x16200000) Part03
  7.40G (0x1d9c00000) DSK7:
|           7.40G (0x1d9800000) Part00
STRG handles:
handle#0 0fea4012   7.40G (0x1d9800000)
handle#1 6fe56806 354.00M (0x16200000)
handle#2 4fe9ed86 100.13M (0x6420000)
handle#3 afe9ed62   4.50M (0x480000)
handle#4 afe9eb92 124.00k (0x1f000)
disk 0fea4012
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 6fe56806
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4fe9ed86
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk afe9ed62
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk afe9eb92
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


C:\its>pdocread -w -d FLASHDR: -b 0x800 -p Part00 0 0x1f000 Part00.raw
CopyTFFSToFile(0x0, 0x1f000, Part00.raw)
ERROR: ITReadDisk: outbuf==NULL
 - The device is not ready for use.


C:\its>pdocread -w -d FLASHDR: -b 0x800 -p Part01 0 0x480000 Part01.raw
CopyTFFSToFile(0x0, 0x480000, Part01.raw)
ERROR: ITReadDisk: outbuf==NULL
 - The device is not ready for use.


C:\its>pdocread -w -d FLASHDR: -b 0x800 -p Part02 0 0x6420000 Part02.raw
CopyTFFSToFile(0x0, 0x6420000, Part02.raw)
ERROR: ITReadDisk: outbuf==NULL
 - The device is not ready for use.


C:\its>pdocread -w -d FLASHDR: -b 0x800 -p Part03 0 0x16200000 Part03.raw
CopyTFFSToFile(0x0, 0x16200000, Part03.raw)
ERROR: ITReadDisk: outbuf==NULL
 - The device is not ready for use.
The only thing i can think of is that the ROM is protected. Is this the reason?

Thanks in advance.

Mick
 
 
25th April 2009, 09:43 AM |#22  
Junior Member
Thanks Meter: 3
 
More
I dumped my traditional chinese rom
Hi, i'm new to all this, i dumped my rom finally and it's from a HTC touch Pro i bought in Taiwan so everything is in chinese, now i want to flash it with an english rom, but wanted to dump the original rom in case i need to send it for guarrantee, because i have looked in your wiki db and you don't have a traditional chinese (the one used in Taiwan) one there, maybe you have it somewhere else or i just can't find it , if it is somewhere else could someone tell me where it is, please , just in case I need it?

My current versions are:
R 1.02.25.19 I guess this is the radio version.
G 52.33.25.17U I guess this is the protocol version (not sure what this means???, hehe)
D 1.93.00.00 I guess this is the rom version (Please correct me if i'm wrong with anything, i'd really appreciate it)

I have one more doubt about the process everything turned out fine i guess, because i didn't get any error messages, but you said that when creating part02.raw and part03.raw it will take some time, in part02 it took about ten mins i guess it's fine, but in part03 it did it almost in no time. Is this normal or did i make any mistakes? i'll post what i typed in the command lines so someone could check it please, and let me know if it's fine.
One more thing, and i don't know if it has something to do with it too, is that the phone had no sim card and no memory sdcard inserted when i dumped it, thank you very much in advance!

At the end i also ended with these files in d:\htctpro\itsutil i have never done this before in my computer and i didn't check if the files where there before, but since i downloaded the utils from the wiki i guess it should've came without any of those when i unrar them.

04/25/2009 04:01 PM 3,272,704 Part00.raw
04/25/2009 04:02 PM 5,636,096 Part01.raw
04/25/2009 04:12 PM 153,354,240 Part02.raw
04/25/2009 04:31 PM 318,242,816 Part03.raw

Quote:

D:\htctpro\itsutil>pdocread.exe -l
Copying D:\htctpro\itsutil\itsutils.dll to WCE:\windows\itsutils.dll
458.25M (0x1ca40000) DSK1:
| 3.12M (0x31f000) Part00
| 5.38M (0x560000) Part01
| 146.25M (0x9240000) Part02
| 303.50M (0x12f80000) Part03
STRG handles:
handle#0 2fd670f6 303.50M (0x12f80000)
handle#1 8feac75a 146.25M (0x9240000)
handle#2 2feac736 5.38M (0x560000)
handle#3 8feac6ee 3.12M (0x31f000)
disk 2fd670f6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 8feac75a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 2feac736
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 8feac6ee
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


D:\htctpro\itsutil>pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)

D:\htctpro\itsutil>pdocread -w -d DSK1: -b 0x800 -p Part01 0 0x560000 Part01.raw
CopyTFFSToFile(0x0, 0x560000, Part01.raw)

D:\htctpro\itsutil>pdocread -w -d DSK1: -b 0x800 -p Part02 0 0x9240000 Part02.raw
CopyTFFSToFile(0x0, 0x9240000, Part02.raw)

D:\htctpro\itsutil>pdocread -w -d DSK1: -b 0x800 -p Part03 0 0x12f80000 Part03.raw
CopyTFFSToFile(0x0, 0x12f80000, Part03.raw)

25th April 2009, 10:43 AM |#23  
da_jojo's Avatar
Senior Member
Flag Utrecht
Thanks Meter: 5
 
More
these should do.. you can convert em to nbh if you like to have it as reference rom

rename part02.raw to imgfs.bin and use this command to dump rom : ImgfsToDump imgfs.bin
25th April 2009, 02:23 PM |#24  
Junior Member
Thanks Meter: 3
 
More
Confused
Thank you for your answer, but i typed the command as you said and i says it doesn't recognize the command, could you type it exactly as in the command line prompt, please?
Thanks again!
29th April 2009, 11:55 PM |#25  
joojoobee666's Avatar
Senior Member
Thanks Meter: 505
 
More
Quote:
Originally Posted by miffymiffy

When trying to dump the rom i get these errors.

Code:
C:\its>pdocread.exe -l
457.38M (0x1c960000) FLASHDR
|         124.00k (0x1f000) Part00
|           4.50M (0x480000) Part01
|         100.13M (0x6420000) Part02
|         354.00M (0x16200000) Part03
  7.40G (0x1d9c00000) DSK7:
|           7.40G (0x1d9800000) Part00
STRG handles:
handle#0 0fea4012   7.40G (0x1d9800000)
handle#1 6fe56806 354.00M (0x16200000)
handle#2 4fe9ed86 100.13M (0x6420000)
handle#3 afe9ed62   4.50M (0x480000)
handle#4 afe9eb92 124.00k (0x1f000)
disk 0fea4012
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 6fe56806
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4fe9ed86
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk afe9ed62
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk afe9eb92
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


C:\its>pdocread -w -d FLASHDR: -b 0x800 -p Part00 0 0x1f000 Part00.raw
CopyTFFSToFile(0x0, 0x1f000, Part00.raw)
ERROR: ITReadDisk: outbuf==NULL
 - The device is not ready for use.


C:\its>pdocread -w -d FLASHDR: -b 0x800 -p Part01 0 0x480000 Part01.raw
CopyTFFSToFile(0x0, 0x480000, Part01.raw)
ERROR: ITReadDisk: outbuf==NULL
 - The device is not ready for use.


C:\its>pdocread -w -d FLASHDR: -b 0x800 -p Part02 0 0x6420000 Part02.raw
CopyTFFSToFile(0x0, 0x6420000, Part02.raw)
ERROR: ITReadDisk: outbuf==NULL
 - The device is not ready for use.


C:\its>pdocread -w -d FLASHDR: -b 0x800 -p Part03 0 0x16200000 Part03.raw
CopyTFFSToFile(0x0, 0x16200000, Part03.raw)
ERROR: ITReadDisk: outbuf==NULL
 - The device is not ready for use.
The only thing i can think of is that the ROM is protected. Is this the reason?

Thanks in advance.

Mick

Remove the : after FLASHDR: Should say pdocread -w -d FLASHDR -b 0x800 -p Part00 0 0x1f000 Part00.raw
21st May 2015, 06:58 AM |#26  
Senior Member
Flag Mumbai
Thanks Meter: 48
 
More
Change output path
Quote:
Originally Posted by RezzZ

HTC Touch Pro DUMP:

open a reg editor on your TP

change:
HKLM\Security\Policies\Policies
valuename '00001001'
was set to dword:2, change it to dword:1

download itsutilsbin (http://www.xs4all.nl/~itsme/projects/xda/tools.html)
extract the zip file and open cmd in that folder

run (copy paste):
pdocread.exe -l” (it’s the letter L not a 1)

you get something like:

Code:
457.75M (0x1c9c0000) DSK1:
|           3.12M (0x31f000) Part00
|           4.50M (0x480000) Part01
|         126.50M (0x7e80000) Part02
|         323.63M (0x143a0000) Part03
  7.61G (0x1e6e80000) DSK7:
|           7.60G (0x1e6a80000) Part00
.....
now run:
“pdocread -w -d DSK1: -b 0x800 -p Part00 0 0x31f000 Part00.raw”
“pdocread -w -d DSK1: -b 0x800 -p Part01 0 0x480000 Part01.raw”
“pdocread -w -d DSK1: -b 0x800 -p Part02 0 0x7e80000 Part02.raw”
“pdocread -w -d DSK1: -b 0x800 -p Part03 0 0x143a0000 Part03.raw”


notice the part before Part0X.raw is the same as you got with pdocread.exe –l, same for the name of the disk.
dumping part02 and 03 wil take some time. be patient.

Just wanted to know whether the output path can be changed to " /sdcard/part01.raw" ?
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes