[Q] [HELP] SK17i Mini Pro Bricked?

Search This thread

Antarios

New member
May 31, 2014
3
0
Hi All,

I have just discovered the realms of rooting and Android Roms, so I decided to get Cyanogenmod on my phone.
It went astoudingly well.

After some time, I started looking for other ROMS and I thought I'd have a try on pac-man rom.
Thus I downloaded the files and I followed the instructions (namely flashing boot.img through fastboot, factory reset and flashing Rom in CWM).
The only problem: the phone does not want to boot properly, it gets stuck on the boot animation and I can't get my device to boot in fastboot :(

After some searching, I came to the conlusion that I should flash stock firmware using flashtool (of which i'll append the log), BUT i accidentally flashed X10 firmware and when I try to connect it to my PC, it went straight into flash mode.

After charging my phone, I managed to flash the CM9 boot.img (with the fastboot console) and I get the right FreeXperiaProject logo, but I can't access recovery anymore and I think it's in a bootloop; every so often the screen gets dark, just to reveal the same logo afterwards.

Any possible solutions?
I will very greatly appreciate your help.

Antarios

LOG:
Code:
31/029/2014 11:29:02 - INFO  - <- This level is successfully initialized
31/029/2014 11:29:02 - INFO  - Flashtool Version 0.9.16.0 built on 19-04-2014 19:00:00
31/029/2014 11:29:08 - INFO  - This is the first sync with devices on github. Renaming devices to devices.old
31/029/2014 11:29:08 - INFO  - Cloning devices from github project
31/030/2014 11:30:08 - INFO  - Devices sync finished.
31/030/2014 11:30:10 - INFO  - Device disconnected
31/030/2014 11:30:19 - INFO  - Device connected in flash mode
31/030/2014 11:30:32 - INFO  - Device Status: NOT FOUND
31/030/2014 11:30:34 - ERROR - This action can only be done in fastboot mode
31/030/2014 11:30:38 - ERROR - This action needs a connected device in ADB mode
31/030/2014 11:30:49 - INFO  - Device Status: NOT FOUND
31/030/2014 11:30:59 - INFO  - Device disconnected
31/031/2014 11:31:02 - INFO  - Flash canceled
31/031/2014 11:31:21 - INFO  - Device connected with USB debugging off
31/031/2014 11:31:21 - INFO  - For 2011 devices line, be sure you are not in MTP mode
31/031/2014 11:31:53 - INFO  - Flash canceled
31/031/2014 11:31:56 - INFO  - Please connect your device into flashmode.
31/032/2014 11:32:04 - INFO  - Bootloader unlock canceled
31/032/2014 11:32:07 - INFO  - Device disconnected
31/032/2014 11:32:14 - INFO  - Device connected in flash mode
31/032/2014 11:32:54 - INFO  - Device disconnected
31/033/2014 11:33:13 - INFO  - Device connected with USB debugging off
31/033/2014 11:33:13 - INFO  - For 2011 devices line, be sure you are not in MTP mode
31/035/2014 11:35:15 - INFO  - Device disconnected
31/039/2014 11:39:12 - INFO  - Device connected in flash mode
31/039/2014 11:39:25 - INFO  - Selected null
31/039/2014 11:39:25 - INFO  - Flash canceled
31/039/2014 11:39:34 - INFO  - Selected null
31/039/2014 11:39:34 - INFO  - Flash canceled
31/039/2014 11:39:52 - INFO  - Device disconnected
31/040/2014 11:40:11 - INFO  - Device connected with USB debugging off
31/040/2014 11:40:11 - INFO  - For 2011 devices line, be sure you are not in MTP mode
31/040/2014 11:40:47 - INFO  - Device disconnected
31/043/2014 11:43:42 - INFO  - Please connect your device into flashmode.
31/043/2014 11:43:44 - INFO  - Bootloader unlock canceled
31/043/2014 11:43:50 - INFO  - Selected null
31/043/2014 11:43:50 - INFO  - Flash canceled
31/043/2014 11:43:53 - INFO  - Device connected in flash mode
31/043/2014 11:43:58 - INFO  - Selected Bundle for SonyEricson X10 (X10). FW release : V1. Customization : BLRelock
31/043/2014 11:43:58 - INFO  - Preparing files for flashing
31/043/2014 11:43:58 - INFO  - Please connect your device into flashmode.
31/043/2014 11:43:59 - INFO  - Opening device for R/W
31/043/2014 11:43:59 - INFO  - Reading device information
31/043/2014 11:43:59 - INFO  - Phone ready for flashmode operations.
31/043/2014 11:43:59 - INFO  - Current device : SK17i - YT9001K2CX - 1254-0468_R1I - 1244-7088_4.1.B.0.587 - WORLD-i_4.1.B.0.587
31/043/2014 11:43:59 - INFO  - Start Flashing
31/043/2014 11:43:59 - INFO  - Processing loader.sin
31/043/2014 11:43:59 - INFO  -     Checking header
31/043/2014 11:43:59 - ERROR - Processing of loader.sin finished with errors.
31/043/2014 11:43:59 - INFO  - Ending flash session
31/043/2014 11:43:59 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
 

Antarios

New member
May 31, 2014
3
0
Flash the ics stock rom with flashmode and after try to flash via fastboot the custom kernel that you want.

Thank you both for replying! The simplicity of your answer makes me feel even more of a noob ;D

Where can I find this stock ROM and how do I flash it (I have only had experience with flashing via CWM)
 

vassilis91

Member
Oct 4, 2013
41
7
Thessaloniki
Thank you both for replying! The simplicity of your answer makes me feel even more of a noob ;D

Where can I find this stock ROM and how do I flash it (I have only had experience with flashing via CWM)

Download this https://docs.google.com/file/d/0B522s-mwpnl0NHVaaERrdGFJUUk/edit?pli=1 , unzip it and move the ftf file into flashtool/firmwares folder. After this, open flashtool and hit flashmode , select the rom and in exclude tab uncheck simlock if exists. Hit flash and connect the phone into flashmode
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Flash stock kernel n stock ROM ! Use the data cable provided ! Make sure you flash the correct files !

    Sent from my Nexus 5 using Tapatalk
    1
    Flash the ics stock rom with flashmode and after try to flash via fastboot the custom kernel that you want.