FORUMS
Remove All Ads from XDA

HANNSpree HSG1279 root and recovery!!! [Updated 01/28/14]

309 posts
Thanks Meter: 70
 
Post Reply Email Thread
29th August 2015, 01:53 PM |#1111  
CXZa's Avatar
Senior Member
Thanks Meter: 29
 
Donate to Me
More
Screen remaining black is normal for adfu mode. You'll see that it's enabled in Pad Product Tool...
The Following User Says Thank You to CXZa For This Useful Post: [ View ] Gift CXZa Ad-Free
 
 
29th August 2015, 08:45 PM |#1112  
Junior Member
Thanks Meter: 5
 
More
Quote:
Originally Posted by kevinthefixer

I have had the best luck with AOKP for a daily driver on this tablet. CM10 seemed to lag more than the stock ROM, and had some stability issues as well IIRC. Recommend you start reading on page 86 of this thread and read it through, don't just skim it.

What ever you do to this tablet, it will always be a work mule, never a thoroughbred.

Thanks for your reply, kevinthefixer. I have read this thread more throughly. Because things can be confusing and it's hard to gather all relevant information, I have created a small step-by-step guide how to replace stock ROM with Cyanogenmod 10.1. Here it is:

1. Download BNMGUYs_CWM_based_recovery_v6.0.3.3_for_ATM7029_po rtable_[cxz].zip (see http://www.slatedroid.com/topic/1073...-cwm-and-twrp/) and copy the zip file to a microSD card.
2. Create a folder called clockworkmod on the microSD card with a backup folder inside that folder.
3. Download CM10.1_Hannspad_T71.zip (see http://forum.xda-developers.com/show...&postcount=854) and extract the folder CM10.1_Hannspad_T71 to clockwordmod/backup/ on the microSD card.
4. Insert the microSD card in your tablet (tablet turned off).
5. Press Vol- + Power button to boot the recovery system.
6. Select "apply update from sdcard", then sd-ext and then BNMGUYs_CWM_based_recovery_v6.0.3.3_for_ATM7029_po rtable_[cxz].zip. This will boot CWM once without replacing the recovery partition.
7. In CWM select "wipe data/factory reset" and confirm with Yes.
8. After wiping the tablet select "backup and restore", then "restore" and "CM10.1_Hannspad_T71" and confirm with Yes.
9. Done. Reboot.

CM 10.1 runs pretty smooth on my tablet, definitely better than stock ROM. Maybe I will try AOKP later, but I am already fairly satisfied.

Thank you very much Christian Troy, steve30x, CXZa and everybody else who contributed to the creation of custom ROMs for this tablet!
The Following 5 Users Say Thank You to asdf7 For This Useful Post: [ View ] Gift asdf7 Ad-Free
31st August 2015, 02:41 PM |#1113  
Member
Thanks Meter: 3
 
More
Original Hannspree rooted firmware for Hannspad SN1AT74
Hi all,
I should try to give a little contribution to this community: the official Hannspree rooted version of the last firmware (kitkat) for Hannspad SN1AT74.
I cannot share directly the link, given to me by Hannspree Italia, due to 10 post limit. I ask CXZa to share it for me (or PM me, if you prefer):

A brief extract from the build.prop:
ro.build.id=KOT49H
ro.build.display.id=20150414_EU_H101H00-2G
ro.build.version.incremental=20150414_EU_H101H00-2G
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Thu Apr 16 16:59:01 HKT 2015
ro.build.date.utc=1429174741
ro.build.type=userdebug
ro.build.user=chrisli
ro.build.host=sz205
ro.build.tags=release-keys
ro.product.model= HSG1279
ro.product.brand= Hannspad
ro.product.name= Demo_7029b
ro.product.device=HSG1279
ro.product.board=atm7029b_hannstar_HSG1279
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Actions
ro.wifi.channels=
ro.board.platform=ATM702X
ro.build.product=HSG1279
ro.build.description=full_gs702c-userdebug 4.4.2 KOT49H eng.chrisli.20150416.165645 release-keys
ro.build.fingerprint=Hannspad/Demo_7029b/HSG1279:4.4.2/KOT49H/20150414_EU_H101H00-2G:user/release-keys
.
.
ro.device.model=HSG1279
.
.
ro.debuggable=1
ro.adb.secure=0
.
.
.


I cannot try it for a while (the tablet is used by my daughter). So, what can I say.....
Enjoy!
and
TRY IT ON YOUR OWN RISK !!! (as suggested by CXZa . Thanks to him and its pre-analysis of this firmware)
The Following User Says Thank You to mattagazzu For This Useful Post: [ View ] Gift mattagazzu Ad-Free
31st August 2015, 03:08 PM |#1114  
CXZa's Avatar
Senior Member
Thanks Meter: 29
 
Donate to Me
More
Quote:
Originally Posted by mattagazzu

Hi all,
I should try to give a little contribution to this community: the official Hannspree rooted version of the last firmware (kitkat) for Hannspad SN1AT74.
I cannot share directly the link, given to me by Hannspree Italia, due to 10 post limit. I ask CXZa to share it for me (or PM me, if you prefer):

A brief extract from the build.prop:
ro.build.id=KOT49H
ro.build.display.id=20150414_EU_H101H00-2G
ro.build.version.incremental=20150414_EU_H101H00-2G
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Thu Apr 16 16:59:01 HKT 2015
ro.build.date.utc=1429174741
ro.build.type=userdebug
ro.build.user=chrisli
ro.build.host=sz205
ro.build.tags=release-keys
ro.product.model= HSG1279
ro.product.brand= Hannspad
ro.product.name= Demo_7029b
ro.product.device=HSG1279
ro.product.board=atm7029b_hannstar_HSG1279
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Actions
ro.wifi.channels=
ro.board.platform=ATM702X
ro.build.product=HSG1279
ro.build.description=full_gs702c-userdebug 4.4.2 KOT49H eng.chrisli.20150416.165645 release-keys
ro.build.fingerprint=Hannspad/Demo_7029b/HSG1279:4.4.2/KOT49H/20150414_EU_H101H00-2G:user/release-keys
.
.
ro.device.model=HSG1279
.
.
ro.debuggable=1
ro.adb.secure=0
.
.
.


I cannot try it for a while (the tablet is used by my daughter). So, what can I say.....
Enjoy!
and
TRY IT ON YOUR OWN RISK !!! (as suggested by CXZa . Thanks to him and its pre-analysis of this firmware)

There you go !
jellybean_atm7029b_10_hannstar-2g_150416_large.fw as a rar archive
Orig. link: https://copy.com/QypSCG8DHct32E4a
Mirror: https://mega.nz/#!EdMUyTRI!UHccnrlEv...FZeK6egsI0b8ws

All the modules were the same as in 150202 update so it's just a minor update.
As it hasn't been tested by mattagazzu (yet), there is a small theoretical chance that
something goes wrong. So that's why a warning is always good to have...
(edit: works --> http://www.htcmania.com/showthread.p...7#post24067477 )

Pad Product tool for the job: http://www.slatedroid.com/topic/9452...oper-editions/
Version 1.07 is a good choice. The newer ones are not that commonly used yet.
1st September 2015, 08:50 PM |#1115  
djport1973's Avatar
Senior Member
Thanks Meter: 87
 
More
Quote:
Originally Posted by asdf7

Thanks for your reply, kevinthefixer. I have read this thread more throughly. Because things can be confusing and it's hard to gather all relevant information, I have created a small step-by-step guide how to replace stock ROM with Cyanogenmod 10.1. Here it is:

1. Download BNMGUYs_CWM_based_recovery_v6.0.3.3_for_ATM7029_po rtable_[cxz].zip (see http://www.slatedroid.com/topic/1073...-cwm-and-twrp/) and copy the zip file to a microSD card.
2. Create a folder called clockworkmod on the microSD card with a backup folder inside that folder.
3. Download CM10.1_Hannspad_T71.zip (see http://forum.xda-developers.com/show...&postcount=854) and extract the folder CM10.1_Hannspad_T71 to clockwordmod/backup/ on the microSD card.
4. Insert the microSD card in your tablet (tablet turned off).
5. Press Vol- + Power button to boot the recovery system.
6. Select "apply update from sdcard", then sd-ext and then BNMGUYs_CWM_based_recovery_v6.0.3.3_for_ATM7029_po rtable_[cxz].zip. This will boot CWM once without replacing the recovery partition.
7. In CWM select "wipe data/factory reset" and confirm with Yes.
8. After wiping the tablet select "backup and restore", then "restore" and "CM10.1_Hannspad_T71" and confirm with Yes.
9. Done. Reboot.

CM 10.1 runs pretty smooth on my tablet, definitely better than stock ROM. Maybe I will try AOKP later, but I am already fairly satisfied.

Thank you very much Christian Troy, steve30x, CXZa and everybody else who contributed to the creation of custom ROMs for this tablet!

Click image for larger version

Name:	uploadfromtaptalk1441136895972.jpg
Views:	414
Size:	255.3 KB
ID:	3459414
running fine. Great job. It looks like another tablet

Enviado desde mi Moto G 2014 mediante Tapatalk
13th September 2015, 04:59 PM |#1116  
Junior Member
Thanks Meter: 0
 
More
failed
hi,
i can't:
storage intergrality checking, please wait...
checking failed, error=-1
finding update package...
opening update package...
verifying update package...
e: failed to verify whole-file signature
e : signature vérification failed
e: unknown volume for pâyh [/mnt]
installation aborted.

Please help.


Quote:
Originally Posted by asdf7

Thanks for your reply, kevinthefixer. I have read this thread more throughly. Because things can be confusing and it's hard to gather all relevant information, I have created a small step-by-step guide how to replace stock ROM with Cyanogenmod 10.1. Here it is:

1. Download BNMGUYs_CWM_based_recovery_v6.0.3.3_for_ATM7029_po rtable_[cxz].zip (see http://www.slatedroid.com/topic/1073...-cwm-and-twrp/) and copy the zip file to a microSD card.
2. Create a folder called clockworkmod on the microSD card with a backup folder inside that folder.
3. Download CM10.1_Hannspad_T71.zip (see http://forum.xda-developers.com/show...&postcount=854) and extract the folder CM10.1_Hannspad_T71 to clockwordmod/backup/ on the microSD card.
4. Insert the microSD card in your tablet (tablet turned off).
5. Press Vol- + Power button to boot the recovery system.
6. Select "apply update from sdcard", then sd-ext and then BNMGUYs_CWM_based_recovery_v6.0.3.3_for_ATM7029_po rtable_[cxz].zip. This will boot CWM once without replacing the recovery partition.
7. In CWM select "wipe data/factory reset" and confirm with Yes.
8. After wiping the tablet select "backup and restore", then "restore" and "CM10.1_Hannspad_T71" and confirm with Yes.
9. Done. Reboot.

CM 10.1 runs pretty smooth on my tablet, definitely better than stock ROM. Maybe I will try AOKP later, but I am already fairly satisfied.

Thank you very much Christian Troy, steve30x, CXZa and everybody else who contributed to the creation of custom ROMs for this tablet!

15th September 2015, 10:43 AM |#1117  
CXZa's Avatar
Senior Member
Thanks Meter: 29
 
Donate to Me
More
Quote:
Originally Posted by Desmon97100

hi,
i can't:
storage intergrality checking, please wait...
checking failed, error=-1
finding update package...
opening update package...
verifying update package...
e: failed to verify whole-file signature
e : signature vérification failed
e: unknown volume for pâyh [/mnt]
installation aborted.

Please help.

You don't say what are you installing but
I suggest that you re-download the file(s).
27th September 2015, 08:19 AM |#1118  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by asdf7

Thanks for your reply, kevinthefixer. I have read this thread more throughly. Because things can be confusing and it's hard to gather all relevant information, I have created a small step-by-step guide how to replace stock ROM with Cyanogenmod 10.1. Here it is:

1. Download BNMGUYs_CWM_based_recovery_v6.0.3.3_for_ATM7029_po rtable_[cxz].zip (see http://www.slatedroid.com/topic/1073...-cwm-and-twrp/) and copy the zip file to a microSD card.
2. Create a folder called clockworkmod on the microSD card with a backup folder inside that folder.
3. Download CM10.1_Hannspad_T71.zip (see http://forum.xda-developers.com/show...&postcount=854) and extract the folder CM10.1_Hannspad_T71 to clockwordmod/backup/ on the microSD card.
4. Insert the microSD card in your tablet (tablet turned off).
5. Press Vol- + Power button to boot the recovery system.
6. Select "apply update from sdcard", then sd-ext and then BNMGUYs_CWM_based_recovery_v6.0.3.3_for_ATM7029_po rtable_[cxz].zip. This will boot CWM once without replacing the recovery partition.
7. In CWM select "wipe data/factory reset" and confirm with Yes.
8. After wiping the tablet select "backup and restore", then "restore" and "CM10.1_Hannspad_T71" and confirm with Yes.
9. Done. Reboot.

CM 10.1 runs pretty smooth on my tablet, definitely better than stock ROM. Maybe I will try AOKP later, but I am already fairly satisfied.

Thank you very much Christian Troy, steve30x, CXZa and everybody else who contributed to the creation of custom ROMs for this tablet!

My original question of whether it needs rooting or not, is no longer needed, it wasn't rooted and it installed like a dream, my tablet has a new lease of life, long may it continue
Forgot to say a big thank you to all involved.
27th September 2015, 11:02 AM |#1119  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by CXZa

There you go !
jellybean_atm7029b_10_hannstar-2g_150416_large.fw as a rar archive
Orig. link: https://copy.com/QypSCG8DHct32E4a
Mirror: https://mega.nz/#!EdMUyTRI!UHccnrlEv...FZeK6egsI0b8ws

All the modules were the same as in 150202 update so it's just a minor update.
As it hasn't been tested by mattagazzu (yet), there is a small theoretical chance that
something goes wrong. So that's why a warning is always good to have...

Pad Product tool for the job: http://www.slatedroid.com/topic/9452...oper-editions/
Version 1.07 is a good choice. The newer ones are not that commonly used yet.

Unfortunately some user (like me) have no Windows, therefore we cant use the Tool (Pad Product).
Is there anyone out there that has installed this firmware on his table and can make a Recovery-Image with CWM ?
27th September 2015, 02:12 PM |#1120  
CXZa's Avatar
Senior Member
Thanks Meter: 29
 
Donate to Me
More
Quote:
Originally Posted by ScrewITfix

Unfortunately some user (like me) have no Windows, therefore we cant use the Tool (Pad Product).
Is there anyone out there that has installed this firmware on his table and can make a Recovery-Image with CWM ?

For Hannspree sn1at74 there isn't CWM yet. Or if there is , I haven't heard of it.
My small project of of converting the CWM that @bnmguy made for the atm7029 devices is
frozen because of no feedback. The devices are quite similar but making it work might need
for example the disabling of the selinux....

If your tablet is working then there probably isn't much use of upgrading it at all.
But if that is not the case, you can use VirtualBox and Microsoft's a virtual machine to do the job.
https://www.virtualbox.org/ and https://dev.modern.ie/tools/vms/windows/
14th October 2015, 10:17 PM |#1121  
Junior Member
Thanks Meter: 0
 
More
Please, I'm looking for hannspree rom android 4.1 sn1at71 any of you can put the link to download this roms?
thanks, I need for this android 4.1 tablet.


I am told that this rom is with the tablet fuciona more quickly, yet ye that fimware you have tuned that works very Thin and fast the tablet?
Thank you
Excuse my language, I am Spanish and use google translator, have a good day.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes