Old Q&A-Thread - This Thread will be split into multiple KB-Thread soon

Search This thread
By:
Advanced…
L

luke82

New member
Oct 25, 2015
1
0
Hello everyone,

I just installed Malaysk ROM (great job) on my KLD2. I have a question is it possible to enter 5digit pin code for a bluetooth device ? I have a bluetooth that is connected to my engine computer - similar to OBD2 and it has 5digit code. From the bluetooth app it`s only possible to enter 4 digits :crying:. I installed xposed also but that didn`t do the trick. I was wondering if it`s possible to override it or pair it manually somehow or maybe there is an app to do it ?
Second question - when I go to factory settings change something and then save it hangs on power off and I`ll have to reset it manually. I don`t know if I mess something in the installation process ? Is there a way to wipe everything to 0 a install the fresh ROM again ?
Thanks
 
T

talalalal

Senior Member
Oct 23, 2008
57
17
Hi All,

I'm considering purchasing one of the CarJoying Units and would be grateful if anyone could answer a few questions:

1. Has anyone succeeded in running a multi window setup through this or another Xposed plugin?

http://xdaforums.com/xpos...vable-t2419287
http://repo.xposed.info/module/com.z...floatingwindow

It would be great to run waze or gmaps at the same time and on the same screen as the music player, torque, or another app.

2. Is it possible to hide/minimise the statusbar on the Malaysk rom?

3. Does PetroWS MTC Service work on RK3188 devices or is their an alternative that provides the same functionality.
https://play.google.com/store/apps/details?id=com.petrows.mtcservice

Cheers!
 
devastatorx

devastatorx

Senior Member
Feb 6, 2009
193
128
Indianapolis
dsa8310 said:
From time to time, my permanently used navigation app, TT, "forgets" its settings - the car icon, and after a while the HU no longer boots through. Then I must run recovery/"wipe all" to format the userdata & data partitions, and things get fixed again, for a while.
I assumed it's a storage consistency issue... Hopefully the flash memory is not failing.
So I tried leaving small gaps for the system and oem partitions. Originally there are very big gaps (over 150 MB in the case of system). I don't know their significance, if any.
Only time will tell.
Click to expand...
Click to collapse


I was having this same problem on my joying stock rom. I ended up flashing Malaysk's rom, the first flash didnt take, and I ended up having to flash using a usb drive, then reboot after flash and wipe and flash again so it would take, but i havent had problems since
 
T

Tabs78

Senior Member
Dec 8, 2007
650
25
My factory rom show in status bar temperature from car sensor
In Malaysk how can have same information?

Inviato dal mio SM-G920F utilizzando Tapatalk
 
P

patoca

Member
Dec 24, 2007
19
1
Vierka said:
Malaysk rom, PCV Startup Builder.
After last update spotify works perfect - start automatically with system and resumes from sleep without problem - tested more then 10x.
Abaut yanosik (anti radar, gps app), thank you devilsoft for adding it to PCV Startup Builder.
But it wont start with system.
When i run the command in terminal i got this:
u0_a94@rk3066:/ $ am start -n pl.neptis.yanosik.mobi.android/.ui.activities.LauncherActivity
WARNING: linker: app_process has text relocations. This is wasting memory and is a security risk. Please fix.
Starting: Intent { cmp=pl.neptis.yanosik.mobi.android/.ui.activities.LauncherActivity }
Error type 3
Error: Activity class {pl.neptis.yanosik.mobi.android/pl.neptis.yanosik.mobi.android.ui.activities.LauncherActivity} does not exist.
u0_a94@rk3066:/ $

whats wrong??
Thanks for the info
Click to expand...
Click to collapse

Hi, regarding spotify, were you able to have steering wheel buttons control spoti? Thanks!
 
D

DWilks

Senior Member
Aug 6, 2015
103
22
koimr said:
You should re-read the posts in question; no one was claiming that our units should function on 9 volts and @DWilks even said it was the cause of his problem (he didn't do it deliberately).

He passed this information onto the forum and I thought it was a useful tidbit. I really don't know where you are trying to go with your response above, it's already been decided the 9 volts was a mistake.
Click to expand...
Click to collapse

@koimr You are exactly right! I only offered the info in case someone else had problems with their sound not working. I'm running off a car battery in-house to test different apks and especially sound apks and gps navigation. This is much easier than sitting in a hot car fighting the heat and bright sun light! The specs on the particular audio amp in my JY head unit list supply voltage as 14.4 volts +or-
10%. So 12.96 volts would be the minimum voltage according to specs. Since I'm not connected to a vehicle charging system, my battery voltage has gradually lowered past the operating level of 1 or more components inside my head unit.
That's to be expected.
NOW! for a new problem that someone else has mentioned: The Volume Control,
my unit has the physical pwr/vol knob, stopped working and also the volume window that should pop up no longer did. To get the volume control back working, I had to reboot the unit and all was back to normal. A voltage check at the time showed 12.3 volts from the battery. My volume still worked, but I could not change it either up or down. Neither problem was fixed by powering off or applying the correct voltage. That took a reboot with the correct supply voltage.

This post and the one about the sound not working is just information posted for others to see that the battery state is crucial to the correct operation of these radio/navigation units! So, if your unit starts acting strange, it might behoove one to suspect a voltage supply problem and not apks nor mcu's nor roms! That's 2 problems that someone else has mentioned duplicated on my unit with battery voltage below levels that the unit needs. Hope this helps others....your problems may vary but do suspect battery supply voltage especially if your vehicle is not actually running when the weird problems occur or if you've just started your vehicle like in the morning or a long time in between running........
 
  • Like
Reactions: koimr
H

Hisma

Senior Member
Oct 24, 2010
395
82
@Malaysk, great job dude. Latest ROM works well on my JY-UQ124, very noticeable improvement over stock. Love how I can use power amp as my stock music player now.

I went ahead and donated for your efforts. Keep up the good work.
 
J

JEMShoe

Senior Member
Sep 20, 2015
59
17
robertut said:
Guys, have you tried any lockscreen apps? I need one for the cases when I leave my car at the service workshop. I don't want car maintainer workers to mess around with the head unit, I've got many personal infos on it.
Need a screenlock with the following features:
- start at boot immediately
- use password or pattern
- lock the top statusbar/drawer also
No special design features just simple functionality.
Click to expand...
Click to collapse
CARRisma said:
It's been suggested that installing Tasker with the Secure Settings plugin might provide this feature. I'm yet to try this. If you find a resolution, please let me know.
Click to expand...
Click to collapse

I have been working on a lockscreen setup solution for our Android HUs; I have it working decently on my Nexus 7. However when I tried it on my JYHU it would not work due to missing 'Services' under Android Accessibility settings.
I sent a post yesterday (24-OCT-2015) requesting ***ANYBODY*** please just "...check under Settings->Accessibility and tell me what sub-sections there are (i.e. SERVICES, SYSTEM)?".
Everyone has Settings on their units; It only takes a few minutes to check and reply (and maybe post a screenshot of your accessability menu).

Help me and I can help everyone else.
 
D

DWilks

Senior Member
Aug 6, 2015
103
22
JEMShoe said:
I have been working on a lockscreen setup solution for our Android HUs; I have it working decently on my Nexus 7. However when I tried it on my JYHU it would not work due to missing 'Services' under Android Accessibility settings.
I sent a post yesterday (24-OCT-2015) requesting ***ANYBODY*** please just "...check under Settings->Accessibility and tell me what sub-sections there are (i.e. SERVICES, SYSTEM)?".
Everyone has Settings on their units; It only takes a few minutes to check and reply (and maybe post a screenshot of your accessability menu).

Help me and I can help everyone else.
Click to expand...
Click to collapse

@JEMShoe JY unit 1024X600 Malaysk rom........here's my screen shot but I don't see any "Services". Perhaps an apk adds this to the Accessibility tab and I just don't have an apk that adds it....just guessing on that.
 

Attachments

  • Screenshot_2015-10-25-09-45-56.png
    Screenshot_2015-10-25-09-45-56.png
    80.8 KB · Views: 379
  • Like
Reactions: JEMShoe
L

leo-balaskas

Member
Jul 28, 2010
31
1
i installed rk3188 malaysk rom
KLD2 v.2.77
800x480 on my pumpkin unit

copied the files to internal sd - flash went okay - rom working
but several things are not working wlan - usb - radio and so on... why?
the flash worked - did is missed a point? i also did a factory reset. the rom is nice but this functions do not work
 
J

JEMShoe

Senior Member
Sep 20, 2015
59
17
DWilks said:
@JEMShoe JY unit 1024X600 Malaysk rom........here's my screen shot but I don't see any "Services". Perhaps an apk adds this to the Accessibility tab and I just don't have an apk that adds it....just guessing on that.
Click to expand...
Click to collapse
I installed an app on my JYHU that uses Settings->Accessibility:SERVICES on my Nexus 7. Services still did not show up on the JYHU.
I believe it is because our Settings.apk is missing the Settings->Accessibility:SERVICES.

If anyone is using the stock ROM please look under Settings->Accessibility and tell me what sub-sections there are (i.e. SERVICES, SYSTEM) and reply (and maybe post a screenshot of your accessibility menu).
Meanwhile I will write Joying and ask them if this function was removed; if so, ask them to put it back.

Accessibility is what it sounds like--it can be used by people with limited mobility. In truth, when driving in a car we all have limited mobility in that some activities jeopardize safety.
See this helpful post from Google for more information about Android accessibility features.
Of particular interest is the Service called "Switch access".

BTW, do not try to install TalkBack on your units. First of all, it will stop working.
Second, it tends to block touch screen inputs. Luckily I had a USB keyboard connected while I was testing this and was able to navigate the screen using keys and disable TalkBack then uninstall it.
But I installed it because on my Nexus 7 (even though it is disabled) it uses Settings->Accessibility:SERVICES. But it never showed up on the JYHU.

---

I don't have experience in modifying APK files but I am curious if there is something that can be added to 'enable' the Settings->Accessibility:SERVICES category in our HUs.
Here is what the \Settings\res\xml\accessibility_settings.xml file from my Nexus looks like (I don't have time right now to look at the JYHU xml):

<?xml version="1.0" encoding="utf-8"?>
<PreferenceScreen android:title="@string/accessibility_settings_title"
xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:settings="http://schemas.android.com/apk/res/com.android.settings">
<PreferenceCategory android:title="@string/accessibility_services_title" android:key="services_category" />
<PreferenceCategory android:title="@string/accessibility_system_title" android:key="system_category">
 
vdubskey

vdubskey

Senior Member
Aug 16, 2011
93
7
Just put a toggle switch on the ACC line on the head unit harness. Took me 10 minutes to put it in. I would rather have the unit not even boot not to mention lockscreen apps don't even work on our units.

Sent from my Nexus 6 using Tapatalk
 
D

DWilks

Senior Member
Aug 6, 2015
103
22
@JEMShoe I did a search for Switch Access and it was stated :"The new Android Lollipop (5.0) has switch access built into the mobile operating system! " and also stated that it was not available before 5.0. I did not screenshot my HU before I rooted so I can't check that. Maybe one of the devs will post and help you with a solution.
 
P

p_mike83

Senior Member
Jan 16, 2008
119
36
hello everyone

i am looking to find a way to have TTS voice guidance to work over radio all audio.
There is a app, that allow to stop/lower volume of other streams when the TTS engine makes an announcement. I think this works only with apps using STREAM_MUSIC as the streaming channel.

I Tried it with spotify and the mtcradio app.
with spotify it works, eg the audio stream gets quite/lower so that the TTS announcement ist clearly audible, and continues after the announcement, with the mtcradio app it doesn't work, neither while listening to mp3 on a dvd. ( the announcement is made on top of the audio stream, so that its not clear).

does anyone now which Stream is used from the mtc apps ? is it possible to redirect this stream to STREAM_MUSIC or modify those apps to use this without problems?
 
J

JEMShoe

Senior Member
Sep 20, 2015
59
17
vdubskey said:
Just put a toggle switch on the ACC line on the head unit harness. Took me 10 minutes to put it in. I would rather have the unit not even boot not to mention lockscreen apps don't even work on our units.

Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse

Yep. I suggested that a couple of days ago here and here, and that is what I am going to do when I get my new harness in (I am planning some other development features so I wanted a spare harness). I was looking for a SW solution as well and it was not too hard except that is when I realized our Settings->Accessibility:SERVICES category is missing...I want it back.
 
T

Tabs78

Senior Member
Dec 8, 2007
650
25
Which version of android has your phone?in my opinion above 5.0.2 it is impossible use easy connect

Inviato dal mio SM-G920F utilizzando Tapatalk
 
J

JEMShoe

Senior Member
Sep 20, 2015
59
17
DWilks said:
@JEMShoe I did a search for Switch Access and it was stated :"The new Android Lollipop (5.0) has switch access built into the mobile operating system! " and also stated that it was not available before 5.0. I did not screenshot my HU before I rooted so I can't check that. Maybe one of the devs will post and help you with a solution.
Click to expand...
Click to collapse
According to a reseller we will have 5.0 soon. I want to make sure we have Accessibility settings intact and not crippled.

I can see where to repair it (Accessibility:SERVICES), I am struggling to recompile the settings.apk--this is my first time trying to mod APKs.
 
You must log in or register to reply here.

Similar threads

A
Any info for this unit? RK-A701
Replies
451
Views
139K
C
COURSAROS
G
EasyConnected for Android Nougat?
Replies
19
Views
59K
S
siemar51
G
How do CAN Bus messages make it into the unit?
Replies
30
Views
44K
B
BartmanEH
rooot_999
Help rooting Eonon GA2114 Android 4.4.4
Replies
30
Views
21K
T
typos1
W
Pumpkin 7" Android 4.4.4 Car Head Unit. RK3188 QuadCore - ROOT / FIRMWARE update
Replies
6
Views
14K
W
WestlakeSt

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 147
    P
    pakidermo5000
    HuiFei - 2 DIN Pure Android 4.2.2/4.4.2/4.4.4 RK3066/RK3188 Car Stereo Radio Head Unit. KGL/KLD/RM/GS/JY/MD/KYD/BN/HA [ROOTED]

    Moderation Announcement (added by @dark alex)
    dark alex said:
    Hi together this is an important announcement!

    As you knew Mike an me we were talking about a dedicated section.
    This is now achieved and I am requested by him to sort things out from here.

    I will split out some Key knowledge posts, for example malaysks Firmware-Post, to new Threads in our subforums.

    Developers
    Please if you create new work open you own Thread in the new forums. If you already have posted here probably wait until I split your post out or write to me to ensure I will split you out if you think I missed you or you have a critical release.

    Questionning Users
    Please open your own thread for your questions in our new section. I can not split out every question from here. This thread will be left over for searching so please if you have current questions just ask in our new Q&A-Section.

    I will start splitting up this thread in about one hour.

    You can find the new section at the bottom of this link:
    http://xdaforums.com/android-auto

    Thank you!
    Click to expand...
    Click to collapse



    This is a new thread for this car dvd that was first reported on comment #2224 of the AN-21 U thread.

    Probably you are here because:

    • you want to root your unit. Only units with ROMs 4.2.2 can be rooted (see below how). The only way to have a rooted 4.4.x is installing a pre-rooted ROM (see below how)
    • you have a problem (no internet, no sound, buttons do not work, bad mic quality, rear camera image not showing, door opening not showing, etc.
    • you want to upgrade your unit to a newer software that has sleep mode, personalized music app, personalized functions, root, xposed, can remap buttons, etc.
    All this is covered in this post and most of the problems that you can have are summarized in this post too. Please read this first post before asking. And use the search function of the thread, before asking. Thanks.

    TRICKS THAT MIGHT SAVE 1000 QUESTIONS ON THE THREAD
    Read below and here for basic questions asked and answered 1000 times.

    How to root my unit. Only 4.2.2 can be rooted with an app (see below). To have rooted 4.4x you must install a pre-rooted ROM (see below)
    Get sound when in reverse (thanx to @Keylo Lo)
    here
    Engineering/Factory settings password "126" (thanx to @blankers)
    This allows you to change logo, sound volume, SWC codification, etc.
    Activate USB debugging --> Go to Factory Settings and enter password "adbon".
    System sound is low compared to Radio--> Go to Factory settings and change volume levels
    GPS button does not trigger GPS app You need to choose predefined GPS app, in Settings--> GPS

    Get Into Recovery
    1 Press reset button and power button together
    2 After about 5 secs release reset button, but keep pressing power button
    3 When booting screen appears release power button.
    4 It boots into recovery.
    --Update 1-- some units without front USB have a different procedure
    Firstly power on the unit and then long press the power button and then reset. Then the unit will get three rings and you loose your hand on the power button and short press the power button again. (thanx @netay)
    --Update 2-- some others have this procedure (thanx @R4D3N)
    1. Turn off the unit by holding 3-4 sec the power button.
    2. Hold the RESET button + POWER button for 5 sec
    3. Release the RESET button and keep pressing the POWER button for 2 sec
    4. Release the POWER button and wait. The Recovery menu appears.
    5. With the Volume knob you can move up/down and long press on Volume/Power button to select the option.

    Get Into Bootloader
    The process is basically the same, with the difference that you need to have the computer attached to the unit via the front miniUSB (if you do not have a front USB, you will have to ask your seller how to get into bootloader mode)

    1- boot the unit as usual.
    2- plug the front usb of the unit to your computer usb.
    3- Then, push the reset button and the power button at once and keep them pushed. The reset button is the tiny pin next to the mp3 sdcard. The power button is the volume knob. You will hear the power cut throught the speakers.
    4- Release reset button and keep power button pushed. Now the unit will reboot. You will see nothing, just a black screen. Do not release the power button yet. Your computer will detect a " new hardware", that is the RolckChip. When you hear the windows noise of new detected hardware, you can release power button. It will automatically install the drivers.
    ------------------------------------------------------------------------------------------------------------

    HOW TO UPGRADE YOUR SYSTEM
    BEFORE UPGRADING YOUR UNIT YOU MUST KNOW
    • MCU your unit, there are many (KGL, KGL1, KGL2, KGL3, KGL4, KGL5, KLD, KLD1, KLD2, JY, GS, KYD, MD, BN, HA, MX), If you install the wrong MCU, you will brick your unit.
      To know which one you have. Go to Settings -->About
      If still not clear, see: here or here.
      If you cannot find it here, it probably means that you are in the wrong thread.
    • Resolution of your unit. 800x480 or 1024x600. If you install the wrong ROM, you will brick your unit.
    • Chip of your unit RK3066 or RK3188. It does not really matter, ROMs and MCU are compatible between chips.
    IT IS ADVISABLE TO BACKUP YOUR SYSTEM BEFORE PLAYING WITH IT
    Upgrading is supposed to be a safe operation, but you never know what can happen. So, before updating make sure that:
    1- To backup of your system the easiest way is download nandroid root from google play, and do a nandroid backup with TWRP format). Save it in your external SD.
    2- make sure you can enter in bootloader mode (see below how to)
    3- it is recommended to backup your apps and data (use titanium from google play). The update will do a factory reset.​
    FOLLOW THIS TO UPGRADE YOUR ROM AND/OR MCU
    0- Do a back up (copy the files somewhere safe) of your internal SD card memory. It will be wiped during the process.

    1- Download the ROM (Resolution 1024x600 or 800x480) and MCU (KGL, KLD, JY, GS,RM, MX, BN, HA) for your unit.
    ROMs--> repository This will get you a file named update.img. There are different "flavors" of ROMs.
    Code: 
    - [user=853627]@coudu[/user] (rooted, stock). Early v4.0 and v4.1 have some problems.
- [user=3590033]@Malaysk[/user] (rooted, with very useful mods, some come with NEXT launcher)
- [user=6041319]@dsa8310[/user] (rooted, almost stock)

    MCUs--> Latest MCUs by Malaysk are here . This will get you a file named mcu.img

    2- copy the update.img you have chosen to the root of your GPS card.

    3- copy the mcu.img for your specific unit to the root of your GPS card (if you do not want to update mcu.img, you can skip this step)

    4- insert back the GPS card to the unit. If no window pops up, reboot the unit. At boot, the presence of update.img will be detected and a pop up window will ask you whether you want to update your unit. It will automatically reboot into recovery mode and update your unit. Once done, remove update.img and mcu.img from the root of the gps card or you will be asked every boot for an update.

    5- In some Coudu´s (sd partition of 3Gb) and Malaysk´s ROMs versions, it is necessary to do a factory reset just after the first boot so that everything works properly.

    6- If you lost buttons or radio after the upgrade --> Go to Factory settings (password 126) and choose the proper canbus for your car and the radio chipset. You can change boot logo if you want.

    * If you get Google services error after upgrading to KitKat see this and this​
    ------------------------------------------------------------------------------------------------------------------

    THINGS YOU MAY WONDER BEFORE BUYING A HEADUNIT
    Code: 
    [B]- Boot Up:[/B]: time is around 30s. 
[B]- GPS[/B]: GPS positions very fast. TomTom, Navigon, Sygic,  and regular off-line GPS work. Navigon and Sygic have some problems with some ROMs
[B]- Stand by mode[/B]: Latest ROMs and MCU have the possibility of choosing stand by mode with various times chosen.
[B]- Radio:[/B] radio stations are saved as frequencies
[B]- Bluetooth contacts:[/B] contacts are saved on the device.
- Works fine with Bose system (Audi)
- Possible ground loop noise that needs some tricks to be removed (see section problems) 
- Torque works and can run in parallel with A2DP
- ELM327 works (might need special app like CarService in very weird cases)
- Camera works (might be better to get the one with RK3188 chip)
- There is no automatic brightness control because the unit does not have light sensor, but there are apps that can help
- The touch screen is extremely responsive. It works as good as most phones.
    -------------------------------------------------------------------------------------------------------------------

    HOW TO ROOT AND INSTALL TWRP
    Instructions to get root (thanx to @webdude12)
    It only works for Android 4.2.2. If you want to root 4.4.x you need to take apart update.img and inject SuperUser app (this is only for experts as @coudu, @Malaysk, @dsa8310 ). The alternative is to install a 4.4.x pre-rooted image and you do not have to do anything else. See below in HOW TO UPGRADE YOUR UNIT section how to do it.

    If you want to root your 4.2.2, download Root Master 2.1.1 here
    Code: 
    1- Install the APK.
2- Make sure you are connected to WiFi and you have an internet connection.
3- Open Root Master (do not upgrade to newer version unless you can read chinese, The newest version has different options, all in chinese. Version 2.1.1 just has a button that says "root".))
4- Press root button
5- Chinese characters will flash across the screen.
6- A second popup box will appear, press the purple button.
    The app will automatically install SuperUser.
    This program connects to servers oversea sending hardware information. The downloads a script that will attempt to root the device. If the first script fails, it downloads additional ones. Future goal is monitor this communication with a data logger and find which script works, so that a unique program can be written to achieve root.​
    ------------------------------------------------------------------------------------------------------------------

    How to install TWRP recovery (thanx to Abdul_pt from Freaktab and 1-2-Hak and coudu)
    You do not really need to install TWRP unless you wanna mod the rom yourself, if you mod roms you will know that already.
    - a.t.m. you need a mouse to use TWRP because touch is not working yet
    - if you install TWRP, you will not be able to update the update.img and mcu.img the way it was explained above.

    If you still want to install TWRP:
    Android 4.2.2 800x480
    Download files here
    And follow the post by 1-2-Hak

    Android 4.4.2 800x480
    Follow this: this

    TWRP for 1024x600
    See this post​
    ------------------------------------------------------------------------------------------------------------------
    TRICKS AND MODDED APPS THAT DO WONDERS
    • Install app without adb when regular install does not work
      Sometimes the app won't install normally and you need to sideload it.. This means that you need a computer and adb wifi. There is another way with which you won't need a computer. You just need to install a terminal emulator (you need root ).
      1- Download the terminal emulator app you prefer
      2- Download the app you want to install to /mnt/sdcard
      3- Open terminal emulator
      4- On the terminal navigate to /mnt/sdcard by typing
      Code: 
      - cd /mnt/sdcard
- su
- pm install "NameOfTheApp".apk
      Done, you are app is now installed.

    • Modified Radio Apps
      To install radios you need to copy the app using ESExplorer or Root Explorer straight to /system/app in place of MTCRadio.apk
      Radio version 4.2.2 800x480
      Radio version 4.4.4 800x480

      Radio version 4.4.4 (Malaysk v1, aka alive)

      [*]Car Service. Allows to use SWC and buttons with 3rd party apps (Latest Malysk ROMs already include it).
      Download here (thanx @@KeiserSozeyFr)
      If it does not install, copy directly to /system/app

      [*]Microntek HeadUnit Service Latest Malaysk ROMs include it. It allows to use SWC with non native apps. It allows to make calls and send messages from Android part of HU, and to show toasts. You can find it straight on Google Play.
      There is a modified version (probably outdated) with early start of services here

      [*]Moded Music app. Two versions. One is the original with expanded list, so full names can be seen, and the other one has the list integrated in the background so it is always visible.
      http://xdaforums.com/showpost.php?p=53352994&postcount=894 (thanx to @dark alex)
      anoher one here

      [*]Set Loud Latest ROMs do no need it.
      Method 1:Method 2:

      You need Tasker or Automagic or similar app.
      Set up a task that runs at boot with the following code as "shell command"
      am broadcast -a com.microntek.irkeyDown --ei keyCode 44
      How to: http://xdaforums.com/showpost.php?p=53553617&postcount=1058​
      [*]Speed-sincronized volume increase (AKA GALA)
      This app will modify the volume of your unit according to the speed. The amount sensitivity can be adjusted.
      http://xdaforums.com/showpost.php?p=53441283&postcount=931 (thanx to @dark alex)

      [*]PowerAmp Toast (thanx @agentdr8)
      This app will show title/album/album art when tracks change while PowerAmp is in background.
      http://xdaforums.com/showpost.php?p=53964813&postcount=1461

      [*]Rear Camera without icons (icons were included in the KitKat version 4.4.2) (thanx @typos1 and 4pda.ru guys)
      http://xdaforums.com/showpost.php?p=56888840&postcount=5096

      [*] KLD Launcher 4.4.2 with bigger date
      Launcher see picture​

    ---------------------------------------------------------------------------------------------------------​

    FILE REPOSITORY, FIRMWARES and MCUs for KGL/KLD/GS/RM/JY/MD


    Some of the firmwares are... (list not updated)
    • Custom KitKat 4.4.2 by 4pad.ru (RK3066)
    • Coudu's 4.4.4 v4.2 (RK3066) (January 2015 release), see here
      - Coudu v4.0 and v4.1 have some problems. v4.2 is good (specially releases 150113 for KLD and 150113 for KGL). You might need MTCControlSettings.apk as in these latest releases coudu removed it.​
    • Malaysk's roms (RK3066) w/ and w/o NEXT launcher, also 4.4.4 here
    • JY Android version is this one
    • Malaysk's roms (RK3066) version 24/05/15 Download here. It allows the remapping of the radio buttons.
    • dsa8310 JY rooted ROM 150513 (RK3188) Download here
    -------------------------------------------------------------------------------------------------------------------------------

    WIKI-Page
    Basic info on everything
    Another wiki with general info here​
    -------------------------------------------------------------------------------------------------------------------------------

    PROBLEMS AND SOLUTIONS FOUND BY THE USERS
    Unfortunately the first issues with the promising unit arrived.
    View
    20
    Malaysk
    Malaysk
    http://huifei.fs-fileserver.de/

    Good news!! Now I'm going to lay out all of the latest firmware on the server http://huifei.fs-fileserver.de/content/firmware/MALAYSK%20ROMS/​

    Thank dark alex
    View
    17
    I
    i.draskovic
    Good news for Sygic users :)

    I have found solution how to make Sygic to work on ours devices.
    It is wery easy and it finaly works for me, and I would like to share it with others. You can make it in two steps.
    First of all you have to install rooted ROM. I have install update_4_4_4_RK3066_1024X600_7_MAL_14_05_2015.rar
    You can find rooted rom for your device on this link https://drive.google.com/folderview?id=0BxmzvLRI7-eNeVA2SWkwM1pLZ28&usp=sharing#listv
    When you done you have to install Xposed IMEI Changer. You can find it at Google Play Store and start the app. Xposed Installer will prompt up and you have to give permissions to IMEI Changer and to install Framework if you did not already.
    Than yo have to open IMEI changer and copy IMEI code from your smartphone. (I have HTC M7 and IMEI code you can find in Settings-Info-Tlefon identity.
    After that you have to reboot device and open IMEI changer to see is it new IMEI applied.
    If it is, than you have to go to Google Play Store, install Sygic and download maps.
    Result you can see on attached image.

    I hope that it will work for others.
    View
    16
    Malaysk
    Malaysk
    NEW from 27 October, 2015
    Only for RK3066 800X480

    Most global firmware update from me, perhaps a few months to 800X480.
    Changes, updates, deletes, transfers, etc. lots of. I write about everything I will not. Here are just a couple:
    +++ Android part of 10 October.
    +++ New NEXT launcher - a slightly redesigned our radio me :)
    +++ The new boot logo (the very first - that appears when you download a few seconds)
    +++ Added gradient Status Bar (Settings - System)
    +++ A new panel ext. programs and recently run (Settings - System)
    +++ Added new tab in Preferences - Advanced Settings screen (think there will understand)
    +++ Fixed program MTCBlueTooth - incorrectly displays the number of the incoming call
    +++ Well, and so on. D.

    Firmware I have not done a simple upgrade - erased all the data. Make a backup of your applications (System Settings then do by hand - not to restore from backup !!!)
    HERE
    View
    15
    Malaysk
    Malaysk
    NEW from September 6, 2015
    Only for RK3066 800X480

    +++ Android base on September 3, 2015
    +++ Many,many other fixes and additions.

    Download HERE
    View

New posts