Remove All Ads from XDA

My LG G2 is COMPLETELY bricked.

570 posts
Thanks Meter: 284
Post Reply Email Thread
14th October 2014, 09:21 PM |#21  
Senior Member
Thanks Meter: 4
i got the same issue. i flashed the wrong files its totally dead only hs-usb 9008 no partitions are detected on windows and nothing on linux.
how do i get back to the detection of the partition part?
15th October 2014, 08:17 AM |#22  
kryptonite's Avatar
Senior Member
Thanks Meter: 137
Donate to Me
Have any of you tried this ?
16th October 2014, 02:02 PM |#23  
Junior Member
Flag Marrakech
Thanks Meter: 0
Originally Posted by naack

i got the same issue. i flashed the wrong files its totally dead only hs-usb 9008 no partitions are detected on windows and nothing on linux.
how do i get back to the detection of the partition part?

hello man

im in the same problem just like you, because i flashed the wrong files
i found a solution in the forum that there is a company mobiletechvideos
but i am not sure of it
so please if you find a solution tell me
16th October 2014, 03:00 PM |#24  
Senior Member
Flag Abu Dhabi
Thanks Meter: 8
LG G2 VS980 not booting, system folder permission is changed accidentally
My LG G2 VS980 phone was rooted by myself. It was a factory unlocked phone. Then using Root Browser by JRummy apps i have removed some system apps and just for a try i have changed the permission settings of system app folder to ro. Then on reboot my phone was stuck, it turns ON and after LG and Verizon logo, says "unfortunately, phone has stopped" and i could see some basic apps such as file manager, calculator etc. but i cannot use the phone at all. It is stuck. How to get back to the original factory unlocked condition? Any ideas plz!
24th January 2015, 10:00 PM |#25  
Account currently disabled
Flag delhi
Thanks Meter: 212
Donate to Me
Can u give me that files..
I will appreciate your help.
Please mail me or give me link of this file..
25th January 2015, 01:02 PM |#26  
Account currently disabled
Flag delhi
Thanks Meter: 212
Donate to Me
Originally Posted by BuffMcBigHuge

So after 20 hours of fiddling... I can safely say that this LG G2 D803 is completely done.

  • Given by a friend, the phone started off by booting straight to fastboot, and had download mode available after he flashed a ROM designed for a tablet.
  • I attempted the .TOT method described here, where I used LGTools. I then only realized that this method was only suitable for an US device, such as AT&T, T-Mobile, or Verizon (couldn't find a Rogers .TOT). I didn't modify the phone in any way.
  • I then continued to download the Rogers KDZ file here. Using the method described in the same post above, I performed the upgrade, only to realize that this was method wasn't working either.
  • I then did some scouring to find a way to boot into TWRP (which was already installed). I found this trick: If you hold the power button down until the phone turns off, you can hold power and down until you see the LG symbol, and then depress and press them again immediately to get into TWRP!
  • In TWRP... I realized that the partitions were all messed up. It was showing 6GB internal, and countless errors were popping up. Another dead end. ADB was working, but I was unable to push anything.
  • I then realized I should attempt to flash updated partitions using fastboot. Using the cmd line in Windows, I erased and flashed partitions I downloaded here after putting the phone in fastboot mode.

This is where I did something stupid.
  • Instead of clicking and downloading on that site, I right-clicked "save-as" and downloaded 8kb corrupted partition files. I continued and flashed them unknowingly... and right after, the phone decided to not boot at all.
  • Using VMWARE and Ubuntu 14.04, I attempted to reflash the partitions using Linux commands described here. Unfortunately, the device would not show the /sd* partitions. Certainly, the bootloader that communicates with the PC does not allocate the partitions properly anymore.
  • Alright, the phone wont boot, because I flashed a bad bootloader. No biggie right? I would see the device as Qualcomm hs-usb qdloader 9008.
  • That's when I scoured for a new method to fix the partitions. I came across QPEST and eMMC Software App to get this device back alive.
  • I spent hours trying to find the right .hex and .mbn file on Chinese websites. I found 8974_msimage.mbn, MPRG8974.hex, flash.xml, rawprogram0.xml and patch0.xml. I had to create accounts of a bunch of sites to finally download the correct files.
  • Carefully using QPST, I was able to get the phone in Download Mode (Qualcomm download mode, not LG download mode), and pushed the instructions to the device.
  • ... too bad. I thought I did everything right. The device times out in the process EVERYTIME.

The phone is officially dead, there isn't a way I know of to get it started (at least to fastboot again). It really pays off to check what you're flashing before you do it. The internet is full of crap.

can you give me these file, patch.xml and rawprg.xml
please....upload it
28th March 2015, 10:09 AM |#27  
absorbers's Avatar
Senior Member
Flag Novosibirsk
Thanks Meter: 134
Donate to Me
Hi all!
Can anybody give me these files?
Plz pm me freands ))
24th November 2015, 07:36 AM |#28  
Thanks Meter: 1
What did you end up doing with it? I love G2's and collect them for parts and fix them up to send to friends families in South America . Interested in getting rid of it?
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes