FORUMS
Remove All Ads from XDA

Motorola Atrix 4G Screen Take Apart Repair Guide

624 posts
Thanks Meter: 787
 
Post Reply Email Thread
29th January 2014, 11:58 AM |#51  
Member
Thanks Meter: 3
 
More
[QUOTE=repairsuniverse;49851588]Do you mean the gold patched flex cable above the camera? If so, this is where the prongs for your headphone jack meet to allow functionality. You will see the prongs and headphone jack attached to the top left of the mid-frame bezel when you take it off the phone.
no i mean the one is glued on screen casing under battery ending to digitizer connector

Besides that Touchscreen now is completelly dead i tried checking all flex cables and all are in position and seem ok and especialy the I/O digitizers flex cable.
Whether the digitizers chip is burned or i dont know .Before at reboots screen worked normally and then i got buggy toucscheen, i tried almosth everything installing other roms or changing the touchpad.cfg back to stock .
and this seemed like a good digitizer no dead spots or whatever just buggy touch

i will try editing the voltage at touchpad.cfg
please someone help........

power button is dead now i lost the button it was standing htere with ! duct tape omfg
worst phone ever even my xperia x8 didnt have so many problems
NEVER again motorola i wish my lumia 920 wasnt stolen....now i have a nokia 112 (7 days battery)
NEVER AGAIN ANDROID
 
 
29th January 2014, 05:50 PM |#52  
Senior Member
Flag Córdoba
Thanks Meter: 363
 
More
[QUOTE=mixlis;49864562]
Quote:
Originally Posted by repairsuniverse

Do you mean the gold patched flex cable above the camera? If so, this is where the prongs for your headphone jack meet to allow functionality. You will see the prongs and headphone jack attached to the top left of the mid-frame bezel when you take it off the phone.
no i mean the one is glued on screen casing under battery ending to digitizer connector

Besides that Touchscreen now is completelly dead i tried checking all flex cables and all are in position and seem ok and especialy the I/O digitizers flex cable.
Whether the digitizers chip is burned or i dont know .Before at reboots screen worked normally and then i got buggy toucscheen, i tried almosth everything installing other roms or changing the touchpad.cfg back to stock .
and this seemed like a good digitizer no dead spots or whatever just buggy touch

i will try editing the voltage at touchpad.cfg
please someone help........

I remember having those issues, digitizer was faulty and the only solution was to re replace it
The Following User Says Thank You to andresrivas For This Useful Post: [ View ] Gift andresrivas Ad-Free
21st December 2015, 09:21 PM |#53  
Junior Member
Thanks Meter: 0
 
More
Some time ago I've bought used Atrix 4g to replace the one returned by the warranty. After a half a year I've encountered the problem with digitizer - horizontal strip (maybe a few millimeters wide) on the display didn't respond to touches correctly.
I've decided to repair the phone by myself and ordered digitizer with a plastic frame in China.
Yesterday I disassembled the phone and replaced the digitizer.
  • Unfortunately now I have vertical strip maybe one centimeter from the left edge of the screen where touches are not processed correctly - i.e. it's almost impossible to type 'w', 's' and 'z' symbols on the on screen keyboard.
  • Also only 2 left most from 4 bottom buttons ("Menu" and "Home") are highlighted in the darkness.
  • And the most strange problem is that SD card is now not visible to the phone but works on PC though
I double checked the connections and cables but it doesn't help
Are there any suggestions which of the problems are the result of my deeds and what are the hardware fault?
5th January 2016, 11:44 AM |#54  
Senior Member
Hong Kong
Thanks Meter: 12
 
Donate to Me
More
thx, that's really helpful
I find hcqs.cc also have this guide
Post Reply Subscribe to Thread

Tags
atrix 4g, motorola, repair, screen assembly, screen repair

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes