[Android N/M][God's Kernel][GK-R4/NR1.0][01-04-16]

Search This thread

mcrane1981

Senior Member
Mar 25, 2011
223
61
Samsung Galaxy S21 Ultra
Absolutely loving this kernel. Performance and battery life are outstanding. Only thing I've found is that my gain levels in sound aren't sticking using kernel auditor! Any help would be much appreciated. Keep up the great work and thanks.
 

DaveHTC200

Senior Member
Oct 2, 2008
1,635
425

luigidk

Senior Member
Dec 6, 2011
718
274
This looks like a great kernel. Anyone had the experience of moving from ElementalX?

Also, as I'm using viper4android, assume I'd want to turn off all faux sounds?

Anyone seen the op lately? Is the kernel still under development?

---------- Post added at 07:45 PM ---------- Previous post was at 07:35 PM ----------

Click on blue color button ...will take you to GK download site

Sent from my Nexus 6P using Tapatalk

Fyi... The download button only shows up when in a browser. It is not visible when using xda labs.
 

FatBoy_Seconds

Senior Member
Dec 16, 2012
296
54
This looks like a great kernel. Anyone had the experience of moving from ElementalX?

Also, as I'm using viper4android, assume I'd want to turn off all faux sounds?

Anyone seen the op lately? Is the kernel still under development?

---------- Post added at 07:45 PM ---------- Previous post was at 07:35 PM ----------



Fyi... The download button only shows up when in a browser. It is not visible when using xda labs.

Kernels rock solid. That's why no one posts anything. No problems here
 

luigidk

Senior Member
Dec 6, 2011
718
274
Kernels rock solid. That's why no one posts anything. No problems here

Good to know - running it now.

Quick note: I am also running viper4android - and with the CPU governor set to 'ondemand' I was having quite a bit of popping/cracking in my audio. I switched to 'pegasusq' and the audio is now clear.

I'll have to see what battery life is like with pegasusq.
 

luigidk

Senior Member
Dec 6, 2011
718
274
OK - one thing I'm noticing here is that PegasusQ works great with V4A. However - once my screen goes off, I'm having audio issues (lots of popping) - I'm guessing this is due to the Governor dumbing down when the screen is off? If that is the case - is there a governor that accounts for this? Or a perf tweak I can try out?

... OK - switched to Intelliactive - and so far that has resolved the popping sounds when the screen turns off.
 
Last edited:

Adi Shakthi

Senior Member
Oct 5, 2011
4,928
16,143
Everywhere
UPDATE NOTE:
Version : GK-R4-20160123

Change-Log:
* Merged all upstream from AOSP android-msm-angler-3.10-marshmallow-mr1
[updated GK source to Latest aosp kernel Source]
* Enabled Dolby DAP post processing & Sound Prime .
[If you don't find Dolby DAP controller to control wait for Upcoming God's-AOSP it will have it Inbuilt]

hope all will love new update.......:good:
 

DaveHTC200

Senior Member
Oct 2, 2008
1,635
425
Thanks man! Awesome work as always! Can't wait to try your ROM! Any news when we might see it? :)

Sent from my Nexus 6P using Tapatalk
 
  • Like
Reactions: Adi Shakthi

murphyjasonc

Senior Member
Oct 19, 2014
584
234
45
Raleigh
Amazon Kindle Fire
Smart Watches
I decided to give this Kernal a try coming from Elemental. I'm loving it so far. Seems to be a perfect mix between performance and battery. Its not a big deal but I can't get the Fsync setting to stick. Its disabled by default. When I enable it and leave the screen and come back its disabled again. Is this a bug or is it by design? I've always had it enabled before but its not a deal breaker by any means. This Kernal is rock Solid!
 
  • Like
Reactions: Adi Shakthi

Adi Shakthi

Senior Member
Oct 5, 2011
4,928
16,143
Everywhere
Thanks man! Awesome work as always! Can't wait to try your ROM! Any news when we might see it? :)

Sent from my Nexus 6P using Tapatalk
yep Thanks mate ....sooner ....curently giving update to Yureka & Yuphoria Gods Kernel ....poor guys didn't got any update from me from past 3 months :laugh:

Rom its nothing special ...its a Stable AOSP with some minimal options like CMTM and some hard rock optimization along with sweetest sound ;)
I decided to give this Kernal a try coming from Elemental. I'm loving it so far. Seems to be a perfect mix between performance and battery. Its not a big deal but I can't get the Fsync setting to stick. Its disabled by default. When I enable it and leave the screen and come back its disabled again. Is this a bug or is it by design? I've always had it enabled before but its not a deal breaker by any means. This Kernal is rock Solid!

may be a bug i think can you pull a logcat and link me ? will look into possible issue
 
  • Like
Reactions: DaveHTC200

XBOHDPuKC

Senior Member
Sep 9, 2007
263
35
I have a weird problem - after flashing this kernel my fingerprint to wake function is really spotty - in most cases it doesn't work - I need to press the power button for it to work, which defeats the whole purpose. In some cases it works but with a significant delay, something like a problem we had from the very early days when there was a delay in reading FP when the phone was charging. And one time when the fingerprint failed to read and I turned on the screen it read "FP hardware is not available" - never seen this message before.

Anyone has any clue what might be going on?

Thanks a bunch!
 

murphyjasonc

Senior Member
Oct 19, 2014
584
234
45
Raleigh
Amazon Kindle Fire
Smart Watches
I have a weird problem - after flashing this kernel my fingerprint to wake function is really spotty - in most cases it doesn't work - I need to press the power button for it to work, which defeats the whole purpose. In some cases it works but with a significant delay, something like a problem we had from the very early days when there was a delay in reading FP when the phone was charging. And one time when the fingerprint failed to read and I turned on the screen it read "FP hardware is not available" - never seen this message before.

Anyone has any clue what might be going on?

Thanks a bunch!

yep Thanks mate ....sooner ....curently giving update to Yureka & Yuphoria Gods Kernel ....poor guys didn't got any update from me from past 3 months :laugh:

Rom its nothing special ...its a Stable AOSP with some minimal options like CMTM and some hard rock optimization along with sweetest sound ;)


may be a bug i think can you pull a logcat and link me ? will look into possible issue

I've been running the Kernal a couple days now and can 2nd the issue with fingerprint to wake. I'm at work right now but will post a log cat when I get home.
 
  • Like
Reactions: Adi Shakthi

Top Liked Posts

  • There are no posts matching your filters.
  • 29
    God's-Kernel

    DISCLAIMER:

    Code:
    #include
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked /fried devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this Kernel
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */


    Features Of God's-Kernel-N-Preview

    • Built Using UBERTC- 4.9 Aarch64 Toolchain along with optimizations like GCC optimization for cortex-a57 ,O3 & Graphite flags.
    • Ramdisk Anykernel Format (Can flash over any Roms)
    • No More force encryption & Does not modify system partition
    • OC Support on both Big & Small Clustures. Big upto 2.2GHZ and Small 1.6GHZ
    • Gestures Control: DoubleTap2Wake, Sweep2Wake, Sweep2Sleep,Camera launch gesture
    • Governors: Elementalx,Interactive, Conservative, Ondemand, Powersave, Performance,,userspace
    • Enabled ARCH Power
    • Schedulers: Noop, Deadline, Row, cfq, bfq, fiops, sio.
    • exFAT support
    • Fsync On/Off switch.
    • KCAL advanced color control [V2](RGB, Saturation, Value, Contrast, Hue)
    • Backlight dimmer option
    • High Brightness Mode option
    • HBM panel commands
    • Faux Sound Control 3.6 GPL ,Sound Driver 36
    • Disable crc check for 30% extra performance in IO.
    • Corrected RGB LED brightness for solid indications
    • Disabled power_aware and enable all cores on boot.


    Features Of God's-Kernel-M

    • Built Using UBERTC- 6.0 Aarch64 Toolchain along with optimizations like GCC optimization for cortex-a57 ,O3 & Graphite flags.
    • Ramdisk Anykernel Format (Can flash over any Roms)
    • No More force encryption & Does not modify system partition
    • Linux kernel 3.10.94
    • OC Support on both Big & Small Clustures. Big upto 2.2GHZ and Small 1.6GHZ
    • Adreno idler [An efficient workaround for msm-adreno-tz's overheads]
    • Gestures Control: DoubleTap2Wake, Sweep2Wake, Sweep2Sleep,Camera launch gesture
    • Governors: Barry-Allen,pegasusq,Hyper,Intelliactive,Darkness,Blu-Active,ImpluseElementalx,lionheart,Bioshock
    • Interactive, Conservative, Ondemand, Powersave, Performance,,userspace
    • Hot-Plug Drviers: MSM Hotplug,MSM MPDecision Hotplug[Bricked Hotplug]
    • Inteli-Plug hotplug cpu driver with eco mode
    • State Notifier Driver.
    • MSM Limiter Driver.
    • CPU Boot Controls.
    • Enhanced cpu boost drivers
    • Add sysinterface for GENTLE_FAIR_SLEEPERS [toggle switch]
    • Toggles for Wakeup Boost and Hot-Plug Boost
    • Toggle Schedule workqueues on awake CPUs to save power
    • PowerSuspend Mode [Autosleep, userspace,LCD Panel,Hybrid]
    • Added Quickwakeup initial Driver.
    • Enabled ARCH Power
    • Schedulers: Noop, Deadline, Row, cfq, bfq, fiopsio, sioplus.
    • TCP Congestion Algorithms: Highspeed, cubic, reno, bic, westwood, hybla, htcp, vegas, veno, scalable, ip, yeah, illinois.
    • CPU Voltage Control
    • NTFS r/w and exFAT support
    • F2FS filesystem support
    • Fsync On/Off switch.
    • Added ZSWAP, FRONTSWAP, VNSWAP along with Zram
    • KCAL advanced color control [V2](RGB, Saturation, Value, Contrast, Hue)
    • Backlight dimmer option
    • High Brightness Mode option
    • Live Display Driver for CM Based Roms
    • HBM panel commands
    • Faux Sound Control 3.x GPL ,Sound Driver 36
    • msm_performance
    • Frandom Support.
    • Random entropy tweaks.
    • Userspace knob to enable/disable msm_hsic_host wakelock
    • Toggles for wlan wakelocks
    • Intelli_thermal v3.0: initial coding for Linux 3.10 Qualcomm kernels
    • Thermal:Added a module param to change the thermal throttle temperature point to userspace
    • Selinux permissive by default
    • Disable crc check for 30% extra performance in IO.
    • Toggleable software crc
    • Corrected the AD backlight calculation formulas
    • Corrected RGB LED brightness for solid indications
    • Fixed gcc-4.9.0 miscompilation of load_balance() in scheduler
    • Muted userspace and kernel audit logs
    • Disabled power_aware and enable all cores on boot.
    • Enabled Dcache word access.
    • Added many more CPU scheduler,cpuidle,Timing optimizations patches.


    Change-Log-N-Preview:


    #GK-NR1.0-Angler-20160401:

    Project name: God's Kernel-N
    AudioGod - Revert "Hardcode selinux to permissive at kernel level"
    Pranav Vashi - qcom-cpufreq: Prevent false check
    Senthil Kumar Rajagopal - [PATCH] Fix extern inline use for gcc > 4.3 in c99 mode
    Arnd Bergmann - X.509: silence asn1 compiler debug output
    Antonio Alecrim Jr - X.509: remove possible code fragility: enumeration values not handled
    AudioGod - GK Build: Build GK-NR1.0
    AudioGod - Add Compiler GCC-6.0
    franciscofranco - tick: don't update idle time if cpu offline
    imoseyon - cpufreq: show cpu voltages via sysfs
    imoseyon - DTS: Overclock A57 to 2.2GHz & A53 to 1.6GHz
    Susan - Disable power_aware and enable all cores on boot.
    Greg Hackmann - arch: arm64: force -fno-pic
    AudioGod - GK defconfig: Dolby DAP post processing & Sound Prime
    AudioGod - Enable arch power
    AudioGod - Add more Zram
    smartperson - Fix Angler 3-button headset button press detection
    atl4ntis - Don't reset keys pressed at suspend time
    flar2 - sound control: correct registers for phone mic and video mic
    flar2 - sound control: add speaker gain tunable
    Pavel - sound/soc/codecs: add TOMTOM_A_CDC_RX8
    pafcholini - Sound Control: 3.6
    Pavel - sound/soc/codecs: add sound_control_locked
    Pavel - sound/soc/codecs: fix speaker gain and mic gain for the Nexus-6P
    pafcholini - sound/soc/codecs: Faux Sound control for WCD9330 TomTom codec driver
    Sam Mortimer - Set RGB LED brightness for solid indications
    flar2 - msm: mdss: request HS mode when sending HBM cmds
    Zac Crosby - msm: mdss: Allow user space control of HBM
    flar2 - msm: mdss: Add HBM panel commands
    AudioGod - Revert "msm: vidc: Allow clients to specify/query the colorspace"
    Zhuowei Zhang - Attempt at porting kexec-hardboot for arm64; not working at all
    Geoff Levand - debugging: Bypass purgatory
    Ard Biesheuvel - of/fdt: export fdt blob as /sys/firmware/fdt
    Aaron Kling - Add kexec support for aarch64
    Pradeep Sawlani - ksm: check and skip page, if it is already scanned
    Jens Axboe - cfq-iosched: fix the setting of IOPS mode on SSDs
    Tahsin Erdogan - block: Make CFQ default to IOPS mode on SSDs
    flar2 - wake_gestures: remove unnecessary wakelock
    FrozenCow - usb: gadget: mass_storage: added sysfs entry for cdrom to LUNs
    Nikhilesh Reddy - fs: Workaround the compiler's bad optimization
    franciscofranco - wakeup: add toggle for bluedroid_timer wakelock
    flar2 - msm: qpnp-haptic: disable vibration when vmax_mv_strong is set to min
    David Herrmann - Bluetooth: hidp: fix device disconnect on idle timeout
    Ping Li - msm: mdss: Correct the AD backlight calculation formulas
    Ulf Hansson - mmc: core: Use mmc_flush_cache() during mmc suspend
    myfluxi - msm: kgsl: Report correct GPU frequency in sysfs
    myfluxi - PM: devfreq: Use high priority workqueue
    Manikanta Sivapala - msm: vidc: disable CPU L2 cache PC during video sessions
    flar2 - msm_performance: Make input boosting optional
    flar2 - mdss_fb: backlight dimmer option
    flar2 - wake_gestures: adjust timing for camera gesture
    flar2 - wake_gestures: update timings for new tick rate
    flar2 - wake_gestures: enable sweep up by default
    flar2 - wake_gestures: add camera launch gesture
    flar2 - angler: Wake gestures: sweep2wake, sweep2sleep and doubletap2wake
    flar2 - angler: enable dt2w while tp is suspended
    flar2 - Revert "angler: kernel: Do not enable or disable gesture mode after tp suspended."
    savoca - msm: mdss: kcal: Only apply updates on index 0
    savoca - msm: mdss: kcal: Use PCC for negative display mode
    savoca - msm: mdss: KCAL: Send a pp display commit when changes are made
    savoca - msm: mdss: KCAL: Do not read from picture adjustment registers
    savoca - msm: mdss: KCAL: Read values from MDP registers wherever possible
    flar2 - msm: mdss: KCAL: forgot to delete file
    savoca - msm: mdss: KCAL: Apply default values on boot
    savoca - msm: mdss: KCAL: Queue changes when panel is powered off
    savoca - msm: mdss: KCAL: Remove MODULE_DESCRIPTION
    savoca - msm: mdss: KCAL: Update Kconfig description
    savoca - msm: mdss: KCAL: Update according to linux guidelines and checkpatch.pl
    savoca - msm: mdss: KCAL: Check panel power state before applying values
    savoca - msm: mdss: KCAL: Allow kcal_enable to control all post-processing features
    savoca - msm: mdss: Keep KCAL within its own source file
    savoca - msm: mdss: Add pa_v2 support to KCAL
    savoca - msm: mdss: Replace PGC implementation with PCC for KCAL
    savoca - msm: mdss: Add KCAL support for post processing control [v2]
    flar2 - cpufreq_elementalx: add missing declaration
    flar2 - cpufreq_elementalx: cache tunables
    flar2 - cpufreq_elementalx: add powersave mode and adjust freq tables
    flar2 - cpufreq_elementalx: remove gboost
    flar2 - cpufreq_elementalx: freq_table per policy and pass policy to init function
    flar2 - cpufreq_elementalx: store freq_table per policy and add static reference tables
    flar2 - cpufreq_elementalx: remove fb notifier
    flar2 - cpufreq_elementalx: pick next freq from freq tables
    flar2 - cpufreq_elementalx: tune and make less aggressive
    flar2 - cpufreq_elementalx: replace input boost with down factor and floor frequency
    flar2 - cpufreq_elementalx: disable input boost
    flar2 - cpufreq_elementalx: let input boost drop to lower frequency
    flar2 - cpufreq_elementalx: increase max screen off freq
    flar2 - cpufreq_elementalx: apply input boost per-cpu
    flar2 - cpufreq_elementalx: refactor and adjust
    flar2 - ElementalX governor version 2
    Bibek Basu - cpufreq: remove race while accessing cur_policy
    Viresh Kumar - cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info'
    Srivatsa S. Bhat - cpufreq: governor: Be friendly towards latency-sensitive bursty workloads
    Jeff Liu - binfmt_elf.c: use get_random_int() to fix entropy depleting
    flar2 - deadline: decrease fifo_batch
    Mauro Andreolini - block, bfq: add Early Queue Merge (EQM) to BFQ-v7r6 for 3.10.8+
    Paolo Valente - block: introduce the BFQ-v7r6 I/O sched for 3.10.8+
    Arianna Avanzini - block: cgroups, kconfig, build bits for BFQ-v7r6-3.10.8+
    franciscofranco - Added fsync on/off support.
    flar2 - Add exFAT support
    flar2 - Add SIO and FIOPS i/o schedulers
    AudioGod - Disable crc check for 30% extra performance in IO
    AudioGod - Hardcode selinux to permissive at kernel level
    AudioGod - Makefile: Add GCC optimization for cortex-a57
    AudioGod - Optimizations:Add O3 & Graphite flags
    flar2 - mmc: clk_scaling: set scale_down_in_low_wr_load to 1 by default
    Talel Shenhar - mmc: clk_scaling: add sysfs for avoiding scale down in write
    AudioGod - Add GK Build Script & Change-log Generator


    Change-Log-M:


    #GK-R4-20160123:

    Merged all upstream from AOSP android-msm-angler-3.10-marshmallow-mr1
    [updated GK source to Latest aosp kernel Source]
    Enabled Dolby DAP post processing & Sound Prime .
    [If you don't find Dolby DAP controller to control wait for Upcoming God's-AOSP it will have it Inbuilt]


    #GK-R3-20151227:

    Fixed Camera blank screen issues.
    Adopted Anykernel2 build style
    Added init.gods.rc
    Added post boot script for applying GK custom settings
    Added Google Services battery drain fixer by Alcolawl@xda
    Switched Back to UBERTC-6.0 Tool-Chain



    #GK-R2-20151225:

    Evisceration - mmc: toggleable software crc
    buckmarble - net: bcmdhd: reduce ctrl wake lock with separate sysfs node and rename rx wakelock node as well
    franciscofranco - wakeup: add toggles for wlan wakelocks
    franciscofranco - wakeup: add userspace knob to enable/disable msm_hsic_host wakelock
    imoseyon - power: skip sensor_ind wakeup source activation via sysfs
    franciscofranco - net: bcmdhd: reduce wlan_rx wakelock period
    flar2 - net: bcmdhd: reduce wakelocks
    AudioGod - Revert "bcmdhd: reduce rx wakelock timeout via sysfs node"
    AudioGod - Revert "bcmdhd: reduce wakelocks"
    AudioGod - GK Build:Add option to generate change-log before starting build & add UBERTC-5.2 to toolchain selection menu
    anarkia1976 - Adding Change-log generator script for God's Kernel
    AudioGod - drivers/soc/qcom/Kconfig: Fix invalid option & syntax error
    AudioGod - GK defconfig: Enable INTELLI Plug
    Paul Reioux - intelli_plug: add perf_boost sysfs entry and clean up permissions
    Paul Reioux - intelli_plug: add performance boost option
    Paul Reioux - sched: compatibility fix up for intelliplug
    Paul Reioux - intelli_plug: intelligent hotplug cpu driver with eco mode
    Tk-Glitch - sched: Add sysinterface for GENTLE_FAIR_SLEEPERS
    Paul Reioux - intelli_thermal v3.0: initial coding for Linux 3.10 Qualcomm kernels
    AudioGod - Revert "msm: thermal: add a module param to change the thermal throttle temperature point to userspace"


    #GK-R1-20151222:
    • Initial Build Added Bellow mentioned Features & Fixes on Top of Stock AOSP Kernel Source
    • Ramdisk Anykernel Format (Can flash over any Roms)
    • No More force encryption & Does not modify system partition
    • Linux kernel 3.10.94
    • OC Support on both Big & Small Clustures. Big upto 2.2GHZ and Small 1.6GHZ
    • Adreno idler [An efficient workaround for msm-adreno-tz's overheads]
    • Gestures Control: DoubleTap2Wake, Sweep2Wake, Sweep2Sleep,Camera launch gesture
    • Governors: Barry-Allen,pegasusq,Hyper,Intelliactive,Darkness,Blu-Active,ImpluseElementalx,lionheart,Bioshock
      Interactive, Conservative, Ondemand, Powersave, Performance,,userspace
    • Hot-Plug Drviers: MSM Hotplug,MSM MPDecision Hotplug[Bricked Hotplug]
    • State Notifier Driver.
    • MSM Limiter Driver.
    • CPU Boot Controls.
    • Enhanced cpu boost drivers
    • Toggles for Wakeup Boost and Hot-Plug Boost
    • Toggle Schedule workqueues on awake CPUs to save power
    • PowerSuspend Mode [Autosleep, userspace,LCD Panel,Hybrid]
    • Added Quickwakeup initial Driver.
    • Enabled ARCH Power
    • Schedulers: Noop, Deadline, Row, cfq, bfq, fiopsio, sioplus.
    • TCP Congestion Algorithms: Highspeed, cubic, reno, bic, westwood, hybla, htcp, vegas, veno, scalable, ip, yeah, illinois.
    • CPU Voltage Control
    • NTFS r/w and exFAT support
    • F2FS filesystem support
    • Fsync On/Off switch.
    • Added ZSWAP, FRONTSWAP, VNSWAP along with Zram
    • KCAL advanced color control [V2](RGB, Saturation, Value, Contrast, Hue)
    • Backlight dimmer option
    • High Brightness Mode option
    • Live Display Driver for CM Based Roms
    • HBM panel commands
    • Faux Sound Control 3.x GPL ,Sound Driver 36
    • msm_performance
    • Frandom Support.
    • Random entropy tweaks.
    • WakeLock Control (wifi, proximity, modem)
    • Thermal:Added a module param to change the thermal throttle temperature point to userspace
    • Selinux permissive by default
    • Disable crc check for 30% extra performance in IO.
    • Corrected the AD backlight calculation formulas
    • Corrected RGB LED brightness for solid indications
    • Fixed gcc-4.9.0 miscompilation of load_balance() in scheduler
    • Muted userspace and kernel audit logs
    • Disabled power_aware and enable all cores on boot.
    • Enabled Dcache word access.
    • Added many more CPU scheduler,cpuidle,Timing optimizations patches.

    Credits

    I would like to thank @CL3Kener @flar2 @DespairFactor @faux123 @imoseyon @showp1984 @myfluxi @savoca @franciscofranco
    @Dorimanx @arter97 @neobuddy89 @ak @eng.stk for their work/codes on kernels which may directly/ indirectly incorporated into this project. I respect you guys work alot . Thanks a Ton Again.:good:

    **If I still miss any one by-mistake Please don't start Thermo-Nuclear War or Ward War -3 in with me In thread Just Push a PM to me I will not bother to Add your Name to list if you deserve it ...


    Installation


    Very Simple Flash in Any Custom Recovery !!

    GK comes with maximum compatibility with all ROMs, GK patches your existing ramdisk.
    Preferably Do NOT flash this over other custom kernels!
    You should only flash GK over the kernel that came with your ROM [Stock /Custom] !!!


    http://gk.sungsonic.co/




    Do you like my work?
    http://xdaforums.com/donatetome.php?u=4284308


    Disclaimer To Moderators:

    Slight Off-Topic is fine & allowed In My threads , but when users decide to act stupid with trolls,lack of respect , Racial criticism ,religious criticism they should be dealt with with the appropriate means .Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted Off-Topic crap



    Cheers :good::good:

    Source Code



    XDA:DevDB Information
    God's Kernel, Kernel for the Huawei Nexus 6P

    Contributors
    Adi Shakthi
    Kernel Special Features: Simple, Stable ,Poweful

    Version Information
    Status: Stable
    Current Stable Version: GK-R4
    Stable Release Date: 2016-01-23

    Created 2015-12-22
    Last Updated 2016-04-01
    9
    Screenshots

    2015_12_22_19.15.07.png 2015_12_22_19.25.58.png 2015_12_22_19.17.32.png 2015_12_22_19.18.48.png

    2015_12_22_19.19.10.png 2015_12_22_19.19.24.png 2015_12_22_19.19.42.png 2015_12_22_19.20.15.png

    2015_12_22_19.20.41.png 2015_12_22_19.21.25.png 2015_12_22_19.21.41.png 2015_12_22_19.22.54.png

    2015_12_22_19.23.53.png 2015_12_22_19.24.21.png 2015_12_22_19.25.19.jpg
    9
    UPDATE NOTE:
    Version : GK-R4-20160123

    Change-Log:
    * Merged all upstream from AOSP android-msm-angler-3.10-marshmallow-mr1
    [updated GK source to Latest aosp kernel Source]
    * Enabled Dolby DAP post processing & Sound Prime .
    [If you don't find Dolby DAP controller to control wait for Upcoming God's-AOSP it will have it Inbuilt]

    hope all will love new update.......:good:
    6
    UPDATE-GK-R2-20151225

    Major changes In GK-R2-20151225 :

    1. Added Intelli_thermal v3.0: initial coding for Linux 3.10 Qualcomm kernels
    2. sched: Add sysinterface for GENTLE_FAIR_SLEEPERS [toggle switch]
    3. Added Intelli_plug: intelligent hotplug cpu driver with eco mode
    4. sched: compatibility fix up for intelliplug
    5. intelli_plug: add performance boost option
    6. Intelli_plug: add perf_boost sysfs entry and clean up permissions
    7. wakeup: add userspace knob to enable/disable msm_hsic_host wakelock
    8. wakeup: add toggles for wlan wakelocks
    9. mmc: toggleable software crc
    10. Switched to UBERTC 5.2 tool-chain for experimental purpose

    Screenshots:
    2015_12_25_10.29.34.png 2015_12_25_10.30.00.png 2015_12_25_10.30.21.png 2015_12_25_10.30.32.png

    &

    Merry Christmas to all XDA users & GK users
    Adi.