Identified an issue - I'm running Timur's USBROM on my 2012 Nexus 7. When then tablet is woken from sleep (with ignition), the controls do not work. I have to go into Remote Inputs Manager settings and select my USB device from the list. Any solution to this?
it a feature of kernel/rom usb devices remounted on different address, I don't know a way to fix this from app sideIdentified an issue - I'm running Timur's USBROM on my 2012 Nexus 7. When then tablet is woken from sleep (with ignition), the controls do not work. I have to go into Remote Inputs Manager settings and select my USB device from the list. Any solution to this?
Hi, i've a qeustion about wire from a can-bus to resistive adapter and arduino
I have a Golf 6 and an adapter for Pioneer like this:
So i've 3 wires. In witch PINs of the arduino (i've UNO) i must connet this wires?
Sorry but i'm new to arduino
App is very simple in usage
very option for selecting usb device (in case if you have more than one usb serial adapter )
App supports running applications, changing volume, control media, running Tasker tasks.
Support click and hold actions then could be set individually for each button.
requiremens:
- min Android version 4.2.2
- usb host mode or Bluetooth
void setup()
{
pinMode(KPin, OUTPUT);
pinMode(SPin, INPUT);
Serial.begin(115200);
while (!Serial);
Serial.flush();
digitalWrite(KPin, HIGH);
delay(500);
Serial.print("AT+RESET\r\n");
Serial.flush();
delay(1000);
Serial.print("AT+INIT\r\n");
Serial.flush();
delay(1000);
Serial.print("AT+INQ\r\n");
Serial.flush();
digitalWrite(KPin, LOW);
}
im sorry i am being a retard i think i got it compiled and uploaded now. i went into this without reading or knowing anything. next question is where do i hook the resistive output from my controls. why dont you have a link for donations you are a very helpful dev and deserve some..
I would do it if i could. But one of them is a rfduino isolated in the steering wheel connected via bluetooth (havent tested yet but i hope it works) and for the buttons in the middleconsole i would want to use a arduino micro connected via usb.
So it would really help me out to be able to use two at the same time
Gesendet von meinem Nexus 5 mit Tapatalk