Small issue with pairing via Bluetooth...
Actually a big one, it just won't connect to my controller.
I have one that came with my PlayStation, actually, I have two controllers and both are different variants of the same model. One says it draws 300mA and the other 500.
The model is CECHZC2E.
I followed the tutorial to connect, but it just won't.
Sometimes the 4 LEDs will flicker faster than usual though, don't know why that happens.
Anyways, both my controllers will not connect to sixaxis. They don't work on SCP for PC neither, and I know the dongle is compatible.
Bluetooth itself shows the PlayStation controller, but it will ask a password to connect, and no password works.
Any ideas? Is there even support for this controller?
Did you change master address of the controller using PC?
An alternative method is, you can connect an OTG (On-The-Go) cable to the phones / tablet USB port and grab the controller's charging cable and plug the cable into the OTG.. when it connects all 4 lights blink on the controller to let you know it's connected, then open the Six Axis apk, click the bottom right box I think, named "pair" click the address in the box to update the address of the device into the controller... so now, both phone / tablet & controller have this Bluetooth address..
Click start wait for it to configure Bluetooth, and when you see "listening for controller" click the controllers home button (so the 4 light's blink again) and it * should * automatically connect.
1 question, it is an official controller right?
|Thread Tools||Search this Thread|