[ROOT] [TWRP] Gigaset ME/ME Pro

Search This thread

Miguel119

New member
May 4, 2017
1
0
Gigaset me pure

Does anyone know where I can find a rom to my Gigaset me pure? I really want to install Android Nougat but I can't find it anywhere! Would appreciate anyone's help! Thank you!
 
Nov 10, 2008
31
2
Brest
For whom who wants to try my backup (via TWRP): https://drive.google.com/open?id=0B1DGOBuVxY2ZcjNqVUUtZXM1S1E
-removed gigaset packages (incl.powersaver, security app);
...
Install: copy content of zip to internal memory and use "restore" in TWRP.
Backup includes boot, system, recovery (3.0.2),
Suggest to make hard reset via recovery.

Hi heineken78,
I have the same problem "when phone dont wake from call". I install all of your patchs and after "backup (boot, system and recovery)". Every done well, great thank, you do a very good job. Now, the reboot is done less than one minute. The battery configuration is not accessible (foreclose error) but I don't notice change in battery life.

But today, at the end of a call, the screen stay "off" (screen doesn't wake up). I do a hard reset. I notice, the phone heats a the top of it (under Gigaset logo). I think "the phone freeze always when his top is heat".

This is a fabulous phone, but the "wake up" problem is very boring. I hope you find a solution.

Olivier
 

heineken78

Senior Member
Mar 3, 2009
2,574
1,815
Kiev
www.mediafire.com
This is a fabulous phone, but the "wake up" problem is very boring. I hope you find a solution.

Olivier

all Russian forum claims on "wakeup after call" bug.
A bit investigated the problem and found that "RILJ" wakelock donsnt trigger somehow.
There is google stock dialer can be installed over on the phone (via twrp zip) and its seems working. Try it.
Hi heineken78,
The battery configuration is not accessible (foreclose error) but I don't notice change in battery life.

But today, at the end of a call, the screen stay "off" (screen doesn't wake up). I do a hard reset. I notice, the phone heats a the top of it (under Gigaset logo). I think "the phone freeze always when his top is heat". Olivier
Thre is already patch about (take a look again on "my backup post"), also when you do hardreset it does deodexing and its taking while making processor heating the phone. Is ok.
 

Attachments

  • GoogleDealer.zip
    5.7 MB · Views: 97
Last edited:
  • Like
Reactions: wayrunner
Nov 10, 2008
31
2
Brest
I try the google dialer but twice time today the bug "wakeup after call" is coming. I think it is better but not fully stable.
What can i do or try ?
 

bugzmaszyny

New member
May 16, 2017
2
1
Kraków
Are you using GoogleMaps or GPS is on?
I'm getting this bug only after usage of gm.

Hi guys. I had similar problem with random lockouts and heating. It seems it was related to some location services. I used script from XDA to turn off some of them and now everthing is fine. Maybe it will help in your case as well.

Here is the script I used (FixGSv4-signed.zip ):
https://xdaforums.com/lg-g2/general/guide-reducing-google-play-services-t3139032

I don't investigate this problem anymore, but still have some logs.
 
  • Like
Reactions: heineken78

evrinous

New member
May 16, 2017
4
0
hi after a reboot my proximity gyroscope sensor stop working in my gigaset me,
i try reboot and factory reset no change is there something else i can do?
thank you.
 

heineken78

Senior Member
Mar 3, 2009
2,574
1,815
Kiev
www.mediafire.com
Hi guys. I had similar problem with random lockouts and heating. It seems it was related to some location services. I used script from XDA to turn off some of them and now everthing is fine. Maybe it will help in your case as well.

Here is the script I used (FixGSv4-signed.zip ):
https://xdaforums.com/lg-g2/general/guide-reducing-google-play-services-t3139032

I don't investigate this problem anymore, but still have some logs.
thnx a lot.
this zip wont work on our firmware, but I will modify to try on my device.
Thanx!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 25
    Latest video: https://youtu.be/o6cpMa2Fo_c
    Since 01.16 update Gigaset Me and Me pro use same ROM. So read carefully and take responsibility what you are doing on you device.
    Gigaset Pure is not supported here.


    GPL Source codes:
    Me/MePro/ platform tools full : http://www.gigaset.com/de_de/cms/lp/open-source.html
    Me/MePro platform tools uploaded in 1 file (gdrive): https://drive.google.com/uc?id=0B_81lkQEKce4bFlaRXk3dFFwQzA&export=download
    Me/MePro kernel source (my repo on github): https://github.com/Eddie07/GIgaset_Me_MePro_3.10._kernel


    Terms of Usage:
    1. Everything posted on this post should be reposted with links to original post.
    2. I'm not responsible for any damage to your phone.
    3. If you are aware of bricking device by this or you don't understand some of processes described below - close this thread and leave it alone.
    4. If you agree with p.1,2,3 go on to Step2.

    GIGASET secret codes:
    *#*#4636#*#* - phone info
    *#*#2580#*#* -engineer mode (wif, bt tests, usb ports, adb root (pass:gigaset001), ota settings.
    *#*#708#*#* - float system info (cpu speeds, m|b temp), shake test.
    *#*#801#*#* - wifi test.
    *#*#802#*#* - bt test.
    *#*#803#*#* - bt test 2.
    *#*#2588#*#* - factory hardware tests.
    *#*#2581#*#* - Camera callibration??.

    (Only ME/MEPRO)TWRP CUSTOM RECOVERY, UNBRICKING:


    -FLASH CUSTOM RECOVERY ON ME/MEPRO HERE
    -UNBRICK SOLUTION back to rom EU00_V1.1.20160616R ME/MEPRO (if you deleted system, recovery, boot) : BACKUPS--- UNBRICKING

    (Only ME/MEPRO)CUSTOM ROMS:
    LAST CM 12.1

    (Only ME/MEPRO)PATCHES TO STOCK ROM TO BE INSTALLED VIA CUSTOM RECOVERY:

    LAST MY "TUNED" TWRP BACKUP https://xdaforums.com/showpost.php?p=71180342&postcount=371
    -PATCH#1 TWRP PATCH ME/MEPRO for CPU speeds uncap (1,9ghz), Thermal config fix, Fix of display size MePro HERE
    -PATCH#2 Enable 4K video recording in stock camera app HERE
    -PATCH#3 Enable Callrecording button in stock dialer app HERE
    -PATCH#4 READ DESCRIPTION HERE
    -PATCH#5 SystemUI patch HERE

    ADB ROOT FOR STOCK ROM WITHOUT ROOT AND CUSTOM RECOVERY:
    - Unlocking Me/Pro abd root via factory tool hidden in rom. (usage for Gigaset Me/Pro/Pure)
    1) Type in dialer: *#*#2580#*#* to get in Engin. tool
    2) Select "priviledge" tab.
    3) Type "gigaset001" in pw field.
    Get adb root :)
    to check if is done enable USB debugging and try adb command from PC:
    "abd shell" if command prompt ends with "#" then adb is rooted, if "$"-isn't!
    4) Turn off adb root- type password again.
    8
    Stock ROM winter patch!

    Wearing gloves? No problem, your device support this function!
    This patch also combinates dialer soundrecord and camera 4k enable (patches2/3)


    Make system and boot backups in recovery before flashing!!!


    patch 4: ------------------------------

    -updates TWRP recovery 3.0.2-2b -cpu's cooldown enabled/mod htc
    -fixes physical screen sizes (5/5,5 -Me/Mepro)/ Mod heineken
    -add glove mode (settings/display)/ mod Heineken
    -fixes apk installing and security errors in some locales/ Mod heineken/runner_cz
    -removes unneeded apks: Bugbox.apk, MobileService.apk
    -includes Camera 4K fix, enable Soundrecorder in dialer, unlock 1,8-1,9ghz CPU speed/ mod Heineken

    enjoy ---------------------------------

    Download: https://drive.google.com/open?id=0B1DGOBuVxY2ZWmNLckNJLXRzX3c
    Apply (install) via TWRP recovery.
    7
    Easy way to flash Custom recovery TWRP on stock ROM.

    You can flash custom recovery in QUALCOMM download mode (EDL):
    1) download this zip and unpack https://drive.google.com/open?id=158X5m8uH9k3cyUdc2bwbIHohOu-BGWeQ (emmcdl for Linux users)
    2) install driver included in zip. For win10 clock on exe of driver and set compatibility to "older version", and then run as administrator.
    3) Remove usb, switch off the phone, then press vol down and hold, plug usb. You should see new device in device manager in com ports."Qualcomm HS-..9008". Check number of comport (ex. com3).
    https%3A%2F%2Fs14.postimg.org%2F96znmli01%2F9008.jpg

    4) in cmd type (example for COMport 3):
    You need now to flash recovery partition:

    emmcdl -p COM3 -f prog_emmc_firehose_8994_lite.mbn -b recovery twrp-recovery.img

    After when download is done - keep two buttons pressed: vol+ and power until you feel vibration, then release power and keep vol+ until you are in recovery.
    Update to flash via TWRP:
    TWRP 3.0.2 http://xdaforums.com/showpost.php?p=69822800&postcount=117
    7
    TWRP patch #3 Callrecord enable

    PATCH #3. To be installed via TWRP:

    Enabling callrecord button in dialer

    Install zip:https://drive.google.com/open?id=0B1DGOBuVxY2ZSnJzX1FMbFY5VEE
    6
    ME/MEPRO: DEODEXED Stock EU ROM

    Here is stock deodexed EU ROM (EU00_V1.1.20160616R) who wants to use xposed.
    Is not rooted, has no modded boot or apps.
    To be installed via TWRP, better to make a wipe after install.
    Be sure to make a backup of system and boot before installation.

    https://drive.google.com/open?id=0B1DGOBuVxY2ZTUlGdW5kaFZCSHc