Try here hit thanks if workedhi I just flashed the revocery.img w/o flash the ftf file and I get the prpably bricked any1 can help how to turn it off? if I left it on usb conntct just the led turn red only cannot turn it off and use fastboot or flashable...
Try here hit thanks if worked
https://xdaforums.com/sony-xperia-c/help/xperia-c2305-red-light-blink-sign-death-t3574885
The tool name " WMshua perfect flash" IT work for Xperia C. Some try it successfully !
1、Download the WMshua perfect flash:http://www.wmshua.com/ or this http://pan.baidu.com/s/1i3fwCEp After the success of the installation, open, the interface is as follows:View attachment 2651444
2、 Download firmwareView attachment 2651449
3、Choose WMshua perfect flash of a second, a key flash, and then choose FTF firmware, the following figure:View attachment 2651455
4、After the phone off 5s、long press the volume -, insert the usb cable, loosen the button, the computer will automatically connect, install the driver, and then began to strong brush!
5、Flashing process take u half an hour even more,just waiting for 100%, then u can unplug the phone.to restart .Perfectly repair brick. The method is simple .
this is picture guide( All drivers are installed automatically ,u must be sure )
View attachment 2653574
View attachment 2654583
View attachment 2653576
mobileuncle MTK tool 2.9.9 newest look at this:http://xdaforums.com/showthread.php?t=2697236
No....WMShua still can flash bro... im just finished it past second ago.
but im use this version.
hope it work for you guys
still working ?the tool name " wmshua perfect flash" it work for xperia c. Some try it successfully !
1、download the wmshua perfect flash:http://www.wmshua.com/ or this http://pan.baidu.com/s/1i3fwcep after the success of the installation, open, the interface is as follows:View attachment 2651444
2、 download firmwareView attachment 2651449
3、choose wmshua perfect flash of a second, a key flash, and then choose ftf firmware, the following figure:View attachment 2651455
4、after the phone off 5s、long press the volume -, insert the usb cable, loosen the button, the computer will automatically connect, install the driver, and then began to strong brush!
5、flashing process take u half an hour even more,just waiting for 100%, then u can unplug the phone.to restart .perfectly repair brick. The method is simple .
This is picture guide( all drivers are installed automatically ,u must be sure )
View attachment 2653574
View attachment 2654583
View attachment 2653576
mobileuncle mtk tool 2.9.9 newest look at this:http://xdaforums.com/showthread.php?t=2697236
stuck in 4% while flashing... :crying:
is it need an internet connection while flashing ftf ?
sorry for my bad english
edit :
unplug the phone and reflash... it's working, and now reach 97% and waiting...
edit :
after waiting for an half hour since 97%, it's finished... yaaaay
Do i need to flash S39h ftf on my s39h xperia C or the C2305 work on chinese phone? (i have pb to find a correct version for my S39h)