[MOD][Moto G5 Plus] MultiROM v33e [No Kexec Workaround][09-10-17]

Search This thread

jbradshw

Senior Member
Dec 8, 2010
199
27
Atlanta
I got "this is unsupported device (potter)" when using the app. I'm using latest Lineage 14.1.

Also, I'm not new to multirom as I was using it on my old HTC One, but I just got this phone and a bit new to terms like "potter" - what is that? I keep seeing it referenced but unable to find what it means.
 

magdeoz

Senior Member
Mar 13, 2014
428
493
29
Queretaro
cloudroid.ddns.net
  • Like
Reactions: GtrCraft

hckd

Member
May 20, 2017
5
0
Hi sry new to all this... But cant find that kernal patch being referred to in initial post.... Im currently using AOKP 7.1.2 and havent changed stock kernal....
 

Cybertron713

Senior Member
Feb 28, 2014
76
22
So, new to MultiROM and the Moto G5 Plus, just upgraded from 2014 Moto X. I flashed the recovery with Flashify, rebooted to recovery, it showed the MultiROM logo where the TWRP logo usually is, flashed the MultiROM zip, and now, when I enter the modified MultiROM Manager by magdeoz, it says I have v33 installed, but no MultiROM TWRP. is this normal? Or did I break something? I'm using Magisk, already, if that has anything to do with it.
 

smitharro

Senior Member
Jan 2, 2012
2,629
1,712
Blokker
I tried all this, but I stumbled into quite a few problems. My primary rom was RR. I installed the special twrp and the other files. Managed to install LineageOS as a secundary rom. It booted just fine. Than back to RR. It booted fine, but somehow RR had 'forgotten' my unlock pattern... No way to enter the user interface. So, back to recovery, wipe, and reinstall RR clean again. It booted fine again. OK. So I decided to boot into LineageOS again. No way! Stuck in the bootloader unlocked warning! So I gave up. Uninstalled MultiRom and reinstalled normal TWRP again. Luckily RR still boots fine!
I must be doing something wrong... Any ideas?

Verstuurd vanaf mijn XT1685 met Tapatalk
 

abeloman

Senior Member
Apr 29, 2012
1,235
695
Veracruz
Samsung Galaxy S20 FE
I tried all this, but I stumbled into quite a few problems. My primary rom was RR. I installed the special twrp and the other files. Managed to install LineageOS as a secundary rom. It booted just fine. Than back to RR. It booted fine, but somehow RR had 'forgotten' my unlock pattern... No way to enter the user interface. So, back to recovery, wipe, and reinstall RR clean again. It booted fine again. OK. So I decided to boot into LineageOS again. No way! Stuck in the bootloader unlocked warning! So I gave up. Uninstalled MultiRom and reinstalled normal TWRP again. Luckily RR still boots fine!
I must be doing something wrong... Any ideas?

Verstuurd vanaf mijn XT1685 met Tapatalk
Quick Google search

https://www.howtogeek.com/240657/how-to-fix-pin-errors-after-restoring-from-twrp-android-backups/

You didn't need to wipe, also wiping seems screw lineage installation.

Enviado desde mi XT1681 mediante Tapatalk
 
  • Like
Reactions: smitharro

smitharro

Senior Member
Jan 2, 2012
2,629
1,712
Blokker

smitharro

Senior Member
Jan 2, 2012
2,629
1,712
Blokker
Multirom is much better and less buggy
Might be, but DBP worked for me... Somehow I'm missing something! Will look into it later. When I wipe the primary rom for a clean install, somehow the secondary rom gets crippled and won't boot anymore. Annoying! They don't seem to be fully independent.

Verstuurd vanaf mijn XT1685 met Tapatalk
 

Pxtxn

Member
Jul 30, 2016
12
5
OnePlus 10 Pro
Might be, but DBP worked for me... Somehow I'm missing something! Will look into it later. When I wipe the primary rom for a clean install, somehow the secondary rom gets crippled and won't boot anymore. Annoying! They don't seem to be fully independent.

Verstuurd vanaf mijn XT1685 met Tapatalk

I had the same problem with the passwords, the cell phone did not accept the passwords and the recommendations i saw did not help me, does that happen every time we change ROMs?
 
  • Like
Reactions: smitharro

jbradshw

Senior Member
Dec 8, 2010
199
27
Atlanta
OK so I have an odd issue that just popped up.

I've been using MultiRom since I got this phone. I've only had 1 ROM on it so far, Lineage 14.1 Unofficial and it's been working great. Today I decided to add a ROM, the same thing but with Substratum (OMS). So I added the ROM and installed it, and it booted up fine. After I was done tinkering with it, I rebooted back to my original ROM and it booted up, but now my lock screen pattern no longer works and I'm unable to get into the device.

I've subsequently removed the OMS ROM I added (so it's now just the original I've been using) but I'm unable to get into it still. I thought if the pattern failed enough times it would ask for your Google account password but it's never getting to that point.

I'm open to suggestions. I really don't want to blow this thing away and install from scratch.
 

nkk71

Inactive Recognized Developer / Contributor
May 26, 2010
8,741
7,571
53
Beirut
OK so I have an odd issue that just popped up.

I've been using MultiRom since I got this phone. I've only had 1 ROM on it so far, Lineage 14.1 Unofficial and it's been working great. Today I decided to add a ROM, the same thing but with Substratum (OMS). So I added the ROM and installed it, and it booted up fine. After I was done tinkering with it, I rebooted back to my original ROM and it booted up, but now my lock screen pattern no longer works and I'm unable to get into the device.

I've subsequently removed the OMS ROM I added (so it's now just the original I've been using) but I'm unable to get into it still. I thought if the pattern failed enough times it would ask for your Google account password but it's never getting to that point.

I'm open to suggestions. I really don't want to blow this thing away and install from scratch.

https://xdaforums.com/showpost.php?p=68738129&postcount=2

The part about:
"Use the TWRP File Manager to navigate to /data/system and delete all the locksettings.* files (such as locksettings.db, etc)"
 

Top Liked Posts

  • There are no posts matching your filters.
  • 26
    vh3puLb.png
    Introduction

    MultiROM is one-of-a-kind multi-boot mod for Moto G5 Plus. It can boot any Android ROM as well as other systems like Ubuntu Touch, Plasma Active, Bohdi Linux or WebOS port, once they are ported to our device. Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs, daily prebuilt image files to install Ubuntu Touch and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.​

    Features:
    * Multiboot any number of Android ROMs
    * Restore nandroid backup as secondary ROM
    * Use for example Ubuntu Touch or Desktop alongside with Android, without the need of device formatting, once they are ported to the Moto X Play
    * Boot from USB drive attached via OTG cable


    Warning!

    It _is_ dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is messing with boot sector and data partition. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash factory images again. Make backups. Always.​


    Installation
    1. Via MultiROM Manager app (We do not have Official Support, so this is not an option for us yet)
    This is the easiest way to install everything MultiROM needs. Install the app (Not for Moto X Play) and select MultiROM and recovery on the Install/Update card. If the Status card says Kernel: doesn't have kexec-hardboot patch! in red letters, you have to install also patched kernel (If you want to use Kexec) - either select one on the Install/Update card or get some 3rd-party kernel here on XDA. You are chosing kernel for your primary ROM, not any of your (future) secondary ROMs, so select the version accordingly.
    Press "Install" on the Install/Update card to start the installation.

    2. Manual installation
    Firstly, there are videos on youtube. If you want, just search for "MultiROM installation" on youtube and watch those, big thanks to all who made them. There is also an awesome article on Linux Journal.


    MultiROM has 3 parts you need to install:

    • Modified recovery (mr-twrp-potter-YYYYMMDD.img) - download the IMG file from second post and use fastboot, TWRP or Flashify app to flash it.
    • Patched kernel - you can find it in the second post. Download the ZIP file and flash it in recovery. You can use any 3rd-party kernel which include the patch.
    • MultiROM (multirom-YYYYMMDD-vXX-potter-signed.zip) - download the ZIP file from second post and flash it in recovery.
    You current rom will not be erased by the installation.
    Download links are in the second post.



    Adding ROMs

    1. Android
    Go to recovery, select Advanced -> MultiROM -> Add ROM. Select the ROM's zip file and confirm.​


    Using USB drive (not tested yet)
    During installation, recovery lets you select install location. Plug in the USB drive, wait a while and press "refresh" so that it shows partitions on the USB drive. You just select the location (extX, NTFS and FAT32 partitions are supported) and proceed with the installation.
    If you wanna use other than default FAT32 partition, just format it in PC. If you don't know how/don't know where to find out how, you probably should not try installing MultiROM.
    If you are installing to NTFS or FAT32 partition, recovery asks you to set image size for all the partitions - this cannot be easilly changed afterward, so choose carefully. FAT32 is limited to maximum of 4095MB per image - it is limitation of the filesystem, I can do nothing about that.
    Installation to USB drives takes a bit longer, because the flash drive is (usually) slower and it needs to create the images, so installation of Ubuntu to 4Gb image on my pretty fast USB drive takes about 20 minutes.
    Enumerating USB drive can take a while in MultiROM menu, so when you press the "USB" button in MultiROM, wait a while (max. 30-45s) until it searches the USB drive. It does it by itself, no need to press something, just wait.​



    Updating/changing ROMs

    1. Primary ROM (Internal)

    • Flash ROM's ZIP file as usual, do factory reset if needed (it won't erase secondary ROMs)
    • Go to Advanced -> MultiROM in recovery and do Inject curr. boot sector.
    2. Secondary Android ROMs
    If you want to change the ROM, delete it and add new one. To update ROM, follow these steps:

    • Go to Advanced -> MultiROM -> List ROMs and select the ROM you want to update.
    • Select "Flash ZIP" and flash ROM's ZIP file.
    • In some cases, you might need to flash patched kernel - get coresponding patched kernel version from second post and flash it to the secondary ROM sama way you flashed ROM's ZIP file.



    Explanation of recovery menus

    Main menu
    - Add ROM - add ROM to boot
    - List ROMs - list installed ROMs and manage them
    - Inject boot.img file - When you download for example kernel, which is distrubuted as whole boot.img (eg. franco kernel), you have to use this option on it, otherwise you would lose MultiROM.
    - Inject curr. boot sector - Use this option if MultiROM does not show up on boot, for example after kernel installation.
    - Settings - well, settings.

    Manage ROM
    - Rename, delete - I believe these are obvious
    - Flash ZIP (only Android ROMs) - flash ZIP to the ROM, for example gapps
    - Add/replace boot.img - replaces boot.img used by this ROM, this is more like developer option.
    - Re-patch init - this is available only for ubuntu. Use it when ubuntu cannot find root partition, ie. after apt-get upgrade which changed the init script.​


    Source code



    Donations (Please donate to the Creator @Tasssadar )

    I'd be glad if you could spare a few bucks. You can use either paypal or Bitcoins, my address is 172RccLB2ffSnJyYwjYbUD3Nx4QX3R8Ris

    14
    Downloads

    1. Main downloads

    AndroidFileHost
    9
    No-kexec workaround (version 4)
    As of this version you need to manually enable the no-kexec workaround.
    Actually, depending on the developer, (s)he may have already enabled it. Nonetheless, you can still choose to override the settings:

    Go to TWRP -> MultiROM -> Settings
    2dhxjrd.jpg


    and enable the No-KEXEC workaround option
    33cbuo6.jpg


    once you do you'll also have the option for ADVanced settings, please see below for a detailed description, though in most cases the default should suffice.​





    Explanation of the no-kexec workaround advanced options
    1znli87.jpg

    (the Info page is supposed to provide the same information as here, but I haven't added that yet)


    1- Use no-kexec only when needed
    This should be the default for most users, the other options are more intended for advanced uses (kernel debugging, and such).

    If MultiROM detects a kexec-hardboot enabled kernel in primary slot, it will use the standard kexec method to boot the secondary. If on the other hand it does not detect that the kernel supports kexec-hardboot then it will use the workaround.​



    2- ... but also ask for confirmation before booting
    Same as option 1 above, but in addition you will be presented with a confirmation message, if the workaround is about to be used:
    s3dld3.jpg



    3- Ask whether to kexec or use no-kexec on booting
    If the kernel in primary slot does support kexec-hardboot'ing then you will be presented with a choice of which method to use
    mrdd8o.jpg


    If the kernel does not support kexec-hardboot then you'll be informed as in option 2 above​



    4- Always force using no-kexec workaround
    Forces the no-kexec workaround to be used, even if the kernel in primary slot has kexec-hardboot support​



    Options 2 and 3, always present the user with a GUI confirmation, whereas option 1 and 4 will act as instructed without prompting the user.





    Visual feedback provided by the Booting... card
    Regular kexec-hardboot boot
    1zmef0m.jpg




    Booting using no-kexec-workaround
    2h83249.jpg




    How does all this work, etc

    The workaround:
    • MultiROM TWRP recovery works, and is able to flash ROMs to secondary
    • MultiROM in essence works (in particular, able to change the mount points during bootup)
    • what does not work is being able to use the secondary ROM's kernel (due to the lack of kexec-hardboot kernel and tools)

    So how do we deal with booting any ROM if we can't use the proper kernel for the ROM?
    Easy :eek: :
    Upon selection of the ROM during MultiROM boot menu, we do the following:
    1. "flash" secondary boot.img to primary partition slot
    2. initiate a full reboot (secondary boot.img is in primary slot)
    3. let the ROM auto-boot up on second boot

    The good part:
    • It works.
      .
    • Every secondary ROM has a boot.img file we can easily access to use the workaround; when you flash a ROM in MultiROM TWRP, not only are the "virtual" system, data, and cache partitions created, but also the boot.img.
      The secondary ROMs' boot.img will be found /data/media/0/multirom/<name of rom>/boot.img or if it's on your external ext4 in the appropriate rom folder
      We use that file and flash it to primary real boot partition and then upon second boot, the correct boot.img is in place for the correct ROM.

    The bad part:
    • Unlike secondary ROMs, the primary ROM does not have a boot.img file... since it is the primary ROM, the boot.img should always be in the real boot partition, since MultiROM expects the primary kernel to have kexec-hardboot capability, but it does not, so I just go ahead and mess with your primary boot partition.
      Since we have no "boot.img" file for the primary, my workaround makes a backup of the boot partition and names it primary_boot.img

      In version 4 of the workaround, this backup is created and used only when booting a secondary ROM. When a secondary ROM is selected it's boot.img is flashed to primary slot, upon booting into the secondary ROM, the primary_boot.img is restored.

    Long story short: the difference between kexec and no-kexec-workaround
    Usual kexec-hardboot MultiROM
    1. Select secondary ROM
    2. MultiROM detects a boot.img
    3. MultiROM reads the secondary boot.img into memory
    4. MultiROM initiates a kexec second boot but into the secondary boot.img from above
    5. MultiROM continues
    No-kexec-workaround MultiROM
    1. Select secondary ROM
    2. MultiROM detects a boot.img
    3. MultiROM flashes the secondary boot.img into the primary boot partition
    4. MultiROM initiates a normal second boot but with the secondary boot.img in the real boot partition
    5. MultiROM restores the primary_boot.img and continues as usual

    so the difference is in point 3... whereas normal kexec'ing loads the secondary boot.img into memory and goes from there, the workaround, actually flashes it to the real primary boot partition... and continues normally from there



    Devices using the no-kexec-workaround successfully
    MultiROM threads for:
    7
    FAQ and other notes
    Device encryption
    Encryption isn't supported right now. So decrypt your device before using this.​

    About security
    In order to make multi-booting possible, MultiROM has to sacrifice some security measures. Firstly, on secondary Android ROMs, /system is not mounted read-only. While there are other things preventing malicious software from messing with /system, this might potentialy make it easier for such software to attack that system.​

    What do the ROMs share?
    All ROMs are separate, except /sdcard, which is shared between all Android ROMs.​

    How many ROMs can I have?/Where are the ROMs stored?
    You can have as many ROMs as you can fit in your /sdcard. All the ROMs are stored in /sdcard/multirom/roms or on an USB drive. This folder is unaccessible in Android, to prevent mediascanner from scanning it. You can either in recovery, or obtain root and go to /data/media/0/multirom/roms.

    The menu with all the ROMs won't show up during boot, how to fix it?
    Either re-flash the MultiROM zip or go to recovery, Advanced -> MultiROM -> Inject curr. boot sector.

    The reason for this is that something rewrote your boot.img, which happens for example when you flash a kernel. MultiROM's boot menu is part of the boot image, so it has to be added into it again.

    Can I flash secondary roms on Micro SD?
    Yes but it's is very slow, internal storage is much better to flash secondary roms.

    How do I flash Gapps in Secondary ROMs?
    After AddRom and is done, go back and Click on the installed Secondary ROM, you will see one of the option to 'Flash Zip', click and install Gapps. Then you can reboot into secondary ROMs, do gapps installation before rebooting otherwise as usual need to deal with SetupWizard FC, at least thats what I observe in my device.
    6
    Credits to:
    @vache (For TWRP trees)
    @nkk71 (For kexec workaround)
    @fAIyaZ (For testing)