but after it Done we got Voice issue in Speakers . is any one else face this issue ?
simply root device and active gsm using radiocomm
To make it work just download Radiocomm 11.12.2 from here: RadioComm_v11.12.2_Install.zip , after this connect the phone to the pc and select pc mode.
In radiocomm go to ma/common/mdm 6x00
go to settings/usb/pst usb drivers
switch to ftm common 1 and wait for the phone to make it purple or green
on the upper side in NVAcces got to value 1877 NV_RF_BC_CONFIG_I
Read the value from the device and after that replace first 16 digits with: 8703E804000200
write data back and restart.
u need setup apn setting for your carrier
after i brick my razr xt908 CDMA and i looking for stock firmware HERE
finaly i get it and unbrick my device and work ok ,, thanks for mr dullawolf
I insisted my device xt908 work on gsm networks and i try again after flash with dullawolf firmware
make root with EPRJ_EasyRootICS_MultiOS_v1.5 and use Radiocomm to active GSM Networks
finaly all done i can use any gsm on my xt908
|Thread Tools||Search this Thread|