ze7zez
Recognized Contributor
- Aug 24, 2012
- 5,363
- 2
- 3,274
As well as S+ Reborn.
More information in the pdf file on the website [GT-I9001][INFO] Android KitKat history sheet.
[9001][RECOVERY] TWRP 2.8.0.0 & CWM 6.0.4.9 by ADC Team (Full Selinux support!!)
- Thread starter DevConnection_Team
- Start date
As well as S+ Reborn.
More information in the pdf file on the website [GT-I9001][INFO] Android KitKat history sheet.
Hi
Just looked at your thread.
Nice job you did - thanks a lot.
I saw roms which i completely forgot.
Regards!
Sent from my [device_name] using XDA-Developers Legacy app
for TriboDoP or ze7zez
Good to now regarding versions of roms.
Write now I am traing to install gapps for RR witch any time install clean and nice, no error
After config my account of google start error (trebuchet stopped, theme stopped, etc); if anybody now or you please help me.
On you tube they say just stop service with problem, clean cache and start from app but is bulshet, the problem is in other place, or in TWRP version? cane be? or in gapps version ?
[ROM] Resurrection-Remix-LP-v5.5.0_20150711-ariesve.zip and not only this one, i try any other version of gapps without success. In one forum say about dpi, no result, I have 260dpi. If I try to change the phone restart. Actualy the only version stable is "RR-LP-v5.3.8_v5.0.2_k3.4.106_2015-03-12 stable" witch is 5.0.2 not 5.1.1.
thx and brgds:silly:
Good to now regarding versions of roms.
Write now I am traing to install gapps for RR witch any time install clean and nice, no error
After config my account of google start error (trebuchet stopped, theme stopped, etc); if anybody now or you please help me.
On you tube they say just stop service with problem, clean cache and start from app but is bulshet, the problem is in other place, or in TWRP version? cane be? or in gapps version ?
[ROM] Resurrection-Remix-LP-v5.5.0_20150711-ariesve.zip and not only this one, i try any other version of gapps without success. In one forum say about dpi, no result, I have 260dpi. If I try to change the phone restart. Actualy the only version stable is "RR-LP-v5.3.8_v5.0.2_k3.4.106_2015-03-12 stable" witch is 5.0.2 not 5.1.1.
thx and brgds:silly:
Last edited:
ze7zez
Recognized Contributor
- Aug 24, 2012
- 5,363
- 2
- 3,274
I do not know what you're asking.
Here is the thread about TWRP, so show the logs.
If you are asking about RR, move the discussion to the RR thread, but do not count on the miracle that LP will work efficiently on i9001.
Unless I'm wrong, nilac recommended tk_gapps-modular-pico(uni)-5.1.1-20150728-signed.zip.
If install rom without any error in log, but inside the rom start process to stop is the problem of ROM, am I write? or TWRP version? or GAPPS version?
Thx for that link of gapps, I already try it on many version of RR, still no stable. The problem of stable is not android version or phone I think is problem of compilation or something wrong in install process, write?
Hi
We are getting offtopic now.
If installation and booting of rom without gapps works then it should not be the rom.
Neither i believe its the twrp 2.8.1.0 (if i remember correctly you were able to flash roms with it)
Did you try latest open pico gapps?
If clean install of lp not works at all i would go back to kk like cm11 release 17 or others with new partition assignment.
Sent from my BTV-W09 using XDA-Developers Legacy app
Hi, finally after many days try many versions of LP with many versions of gapps without succes; I installed "Slim-ariesve-4.4.4.build.8.14-UNOFFICIAL-20141121-1750.zip" with "Slim_mini_gapps.4.4.4.stable.9-UNOFFICIAL-20150326.zip" witch is stable and nice one. And yes you have write, gapps problem. THx:highfive:
Hi
Nice to see you managed to install a rom and gapps!
Sent from my BTV-W09 using XDA-Developers Legacy app
por que siguen poniendo servidores que ya ni sirven desde hace años??
Last edited by a moderator:
- Jun 2, 2012
- 8,010
- 18,268
Please post in English. If a second language is required, post it below the English comment as I have done here. Thank you.
Por favor publicar en Inglés. Si se requiere un segundo idioma, publíquelo debajo del comentario en inglés como lo he hecho aquí. Gracias.
The link to
20140912 TWRP v2.8.0.0 Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.4.x - FULL SELINUX Support - For CM11 R5+) - Flashable ZIP
is broken, no longer active. Can anybody upload the file to an other host or give me an active link for download?
20140912 TWRP v2.8.0.0 Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.4.x - FULL SELINUX Support - For CM11 R5+) - Flashable ZIP
is broken, no longer active. Can anybody upload the file to an other host or give me an active link for download?
ze7zez
Recognized Contributor
- Aug 24, 2012
- 5,363
- 2
- 3,274
Does i9001 have the latest twrp? I really want to swipe the ROM here, but I can't get into the system after I swipe it. I feel dizzy... Thank you for your help
Hi everyone,
Here we are! We are proud to present our builds of full fixed recoveries CWM and TWRP for the Galaxy S Plus (GT-I9001).
Currently the team is composed by the following members:
[Dev] CastagnaIT, Christopher83, Educk, Ivendor, Krislibaeer
[Tester] smeroni68, ktulu84, Xellar, Rhonin86
These builds are:
- free from any known bug (not related to the original sources)
- updated to latest sources available
- tested by the team members
- safe for eMMC bug
- fast backup and restore (due to base kernel v3.4.x)
- stable in all conditions of use
- usable and compatible with: Stock ROMs/CM9/CM10/CM10.1/CM10.2/CM11 and derivated ROM, KERNELS, GAPPS and all Flashable cwm Zip files.
NOTE: on CWM recovery the menu button is for selecting to prevent double-clicks (see cwm5504 with home button for selection)
DOWNLOAD
Flashable ZIP for NORMAL DEVICES (NOT BRICKED eMMC):
- 20140912 TWRP v2.8.0.0 Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.4.x - FULL SELINUX Support - For CM11 R5+) - Flashable ZIP (DL from Dev-Host)
MD5SUM: f174daeeb0dbd48da8c8179ba8c926d8
- 20140613 CWM 6.0.4.9 No Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.4.x - FULL SELINUX Support - For CM11 R5+) - Flashable ZIP (DL from Dev-Host) - (DL from Mediafire)
MD5SUM: 2e65f14c218c482010bba93e5eb92e6a
PREVIOUS VERSIONS
RECOVERY Installation Guide
To install the Flashable ZIP version, follow these instructions:
- download and save the desired recovery zip file on SD card (internal or external)
- start the phone in recovery mode (you can use even stock one)
- to be sure that no shutdown occur during flash, please restart to recovery itself by a soft "reboot to recovery" (ignore if you are flashing from stock recovery)
- go to install funcion and select on the SD card the previously saved zip file
- Flash the zip file
- In few seconds the flash will be complete
- by selecting the right function Reboot the phone to recovery
- check the new recovery and enjoy it!!
UPGRADES
Upgrades from previous versions of CWM or TWRP are the same process as install. No need to wipe anything.
CREDITS
Arco68 for his huge work for our device
AriesVE Dev Connection Team
Krislibaeer for his hard job (special thanks)
Nello96 for Team logo's
SOURCES
All our sources are on AriesVE-DevCon-TEAM GitHub
All CWM and TWRP sources are on respective git.
FAQ
- For recovery bootloop problem you should check at this post
- Is needed any reboot to recovery to avoid unexpected shutdown? Absolutely NOT!!
XDA:DevDB Information
[GT-I9001][RECOVERY] CWM & TWRP by ADC Team, Tool/Utility for the Samsung Galaxy S I9000
Contributors
DevConnection_Team, krislibaeer, CastagnaIT, Christopher83, educk, ivendor, krislibaeer, smeroni68, ktulu84, XeLLaR*
Version Information
Status: Stable
Current Stable Version: TWRP v2.8.0.0 & CWM
Stable Release Date: 2014-10-20
Created 2013-09-29
Last Updated 2014-10-21
Attachments
ze7zez
Recognized Contributor
- Aug 24, 2012
- 5,363
- 2
- 3,274
I don't understand. Did you use "reset phone" and nothing happens?
biliolerkes
Senior Member
Yes! Nothing happens, i click reset phone, Phone restarts to TWRP, I wipe, and it bootloops! And i flash rom again and again, same problem
Attachments
ze7zez
Recognized Contributor
- Aug 24, 2012
- 5,363
- 2
- 3,274
Try advanced wiping and selection of all partitions, or use a newer version of TWRP.
biliolerkes
Senior Member
Fixed: After flashing ROM, in Wipe menu change data filesystem as F2FS
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
155
Hi everyone,
Here we are! We are proud to present our builds of full fixed recoveries CWM and TWRP for the Galaxy S Plus (GT-I9001).
Currently the team is composed by the following members:
[Dev] CastagnaIT, Christopher83, Educk, Ivendor, Krislibaeer
[Tester] smeroni68, ktulu84, Xellar, Rhonin86
These builds are:
- free from any known bug (not related to the original sources)
- updated to latest sources available
- tested by the team members
- safe for eMMC bug
- fast backup and restore (due to base kernel v3.4.x)
- stable in all conditions of use
- usable and compatible with: Stock ROMs/CM9/CM10/CM10.1/CM10.2/CM11 and derivated ROM, KERNELS, GAPPS and all Flashable cwm Zip files.
NOTE: on CWM recovery the menu button is for selecting to prevent double-clicks (see cwm5504 with home button for selection)
DOWNLOAD
Flashable ZIP for NORMAL DEVICES (NOT BRICKED eMMC):
- 20140912 TWRP v2.8.0.0 Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.4.x - FULL SELINUX Support - For CM11 R5+) - Flashable ZIP (DL from Dev-Host)
MD5SUM: f174daeeb0dbd48da8c8179ba8c926d8
- 20140613 CWM 6.0.4.9 No Touch Version FOR NORMAL DEVICES (based on ADC kernel v3.4.x - FULL SELINUX Support - For CM11 R5+) - Flashable ZIP (DL from Dev-Host) - (DL from Mediafire)
MD5SUM: 2e65f14c218c482010bba93e5eb92e6a
PREVIOUS VERSIONS
RECOVERY Installation Guide
To install the Flashable ZIP version, follow these instructions:
- download and save the desired recovery zip file on SD card (internal or external)
- start the phone in recovery mode (you can use even stock one)
- to be sure that no shutdown occur during flash, please restart to recovery itself by a soft "reboot to recovery" (ignore if you are flashing from stock recovery)
- go to install funcion and select on the SD card the previously saved zip file
- Flash the zip file
- In few seconds the flash will be complete
- by selecting the right function Reboot the phone to recovery
- check the new recovery and enjoy it!!
UPGRADES
Upgrades from previous versions of CWM or TWRP are the same process as install. No need to wipe anything.
CREDITS
Arco68 for his huge work for our device
AriesVE Dev Connection Team
Krislibaeer for his hard job (special thanks)
Nello96 for Team logo's
SOURCES
All our sources are on AriesVE-DevCon-TEAM GitHub
All CWM and TWRP sources are on respective git.
FAQ
- For recovery bootloop problem you should check at this post
- Is needed any reboot to recovery to avoid unexpected shutdown? Absolutely NOT!!
XDA:DevDB Information
[GT-I9001][RECOVERY] CWM & TWRP by ADC Team, Tool/Utility for the Samsung Galaxy S I9000
Contributors
DevConnection_Team, krislibaeer, CastagnaIT, Christopher83, educk, ivendor, krislibaeer, smeroni68, ktulu84, XeLLaR*
Version Information
Status: Stable
Current Stable Version: TWRP v2.8.0.0 & CWM
Stable Release Date: 2014-10-20
Created 2013-09-29
Last Updated 2014-10-21282322
