FORUMS
Remove All Ads from XDA

[MCU] Universal MCU-List

1,528 posts
Thanks Meter: 5,320
 
By Malaysk, Senior Member on 11th June 2015, 04:19 PM
Post Reply Email Thread
25th April 2019, 12:32 PM |#941  
Senior Member
Thanks Meter: 1,521
 
Donate to Me
More
Quote:
Originally Posted by Niro-1

I do not see xrc mcu on the list. can you point me to a download link?
xrc/xrc2 is supported?

The only ones I know of are in this thread :

https://forum.xda-developers.com/and...od-cs-t3922056

they have improved sound.
27th April 2019, 02:54 PM |#942  
Junior Member
Thanks Meter: 0
 
More
Mcu versions release notes
I dont see nowhere the release notes of the versions.
Is there somewhere some detailes about the versions differences?
like 2.66 vs 2.84?
27th April 2019, 03:12 PM |#943  
Senior Member
Thanks Meter: 1,521
 
Donate to Me
More
Quote:
Originally Posted by Niro-1

I dont see nowhere the release notes of the versions.
Is there somewhere some detailes about the versions differences?
like 2.66 vs 2.84?

No.
29th April 2019, 10:29 AM |#944  
Junior Member
Thanks Meter: 0
 
More
my mcu say "mcuVER v2.0 FF01 how can i upgrade it? please i try update my head unit system for 3 weeks now and none
7th May 2019, 04:09 PM |#945  
Junior Member
Flag Holon
Thanks Meter: 0
 
More
Unrecognized MCU model
Hi! Thanks for the useful information.
I just got a ford focus and they have removed the SYNC software by ford and installed this MCU version - W30FF-----H----V2.18 (photo attached)

Do you know which version of MCU can I use to replace it?
Or if I can delete it and install the SYNC 3 software by ford?
15th August 2019, 12:47 PM |#946  
Senior Member
Thanks Meter: 4
 
More
My Android head unit has the following from stock:

MTCE_GS_V2.85f_3

I notice in the OP of thread the GS versions are as follows:

Quote:

FOR GS
GS v.2.55 with sleep and redesigned sound processor from darkleo - MCU_GS_2.55_Sleep_Musik.rar
GS v.2.73 - here

Should I install these versions, even though they are a 'lower' version number?

I also notice this thread: https://forum.xda-developers.com/and...mware-t3816042

Which has a 2.94sp version of the 'GS' version, is there a reason this sticky links to a older version?
24th August 2019, 12:27 PM |#947  
Junior Member
Thanks Meter: 0
 
More
Hey Malaysk! Can you help me please?
Hi! Need a update.img file for my Android 4.2 car gps stereo Rockchip RK3066 !!!!!
My unity was like dead for several months and for my surprise It wasn’t broken. I managed to get the unity in to recovery mode, and after some research I found out I need the to update/ recover the firmware and “update.img or dupdate.img” is what I need and the Ebay company that sold it to me is inactive. Is anyone out there with the identical or similar unit that would be kind to help me by sending me this file Please? Here I send some pictures from my unit, no name or brand, I bought it on July 2015 from autogpsel06 on Ebay.
Android 4.2 Jelly Bean
https://drive.google.com/drive/folde...wCBbBM_IZlq0yG

As I don't have the exact brand of my unit and the unit does not boot, it can only get in to recovery mode, thats why I can't answer your question, I can't get in to settings... but I found a exact look alike unit on the market that uses Android 4.4 instead 4.2 here is the link. As I bought my unit from autogpsel06 on Ebay and they don't answer my emails, can't confirm the units Origin, but I am pretty sure that this is the one! Shenzhen electronics Hui Fei.
http://www.kaigele.com/enus/detail_489_685.html


Kind regards
Anderson Lima

2003-2010 Porsche Cayenne Car Stereo Android 4.2 Sat Nav DVD Radio AUX
2003-2010 Porsche Cayenne Car






Quote:
Originally Posted by Malaysk

In this message, I'll lay out all the latest versions MCU for all the units

MCU is suitable for RK3066 and RK3188 !!!
How do I know which version of MCU you have installed?

For information about your MCU (which you need) can be found in Settings - About tablet - 3rd line where there is a word MCU.



For KLD
KLD v.1.98 for those who have turned off the unit for 2-4 seconds. when you turn the ignition key to the MCU above 1.98 - Attachment 3358334

KLD v.2.55 from sleep mode - Attachment 3358305

KLD v.2.55 with sleep and redesigned sound processor from darkleo from 19.06.2015 - Attachment 3370738

KLD v.2.64 from sleep mode - HERE

KLD v.2.64 with sleep and redesigned sound processor from darkleo - HERE

KLD v.2.78 from sleep mode - HERE


FOR KLD 1
KLD1 v.2.55 with sleep and redesigned sound processor from darkleo - Attachment 3370741
KLD1 v.2.55 factory - HERE
KLD1 v.2.67 - HERE


FOR KLD 2
KLD2 v.2.51 - Here
KLD2 v.2.55 with sleep and redesigned sound processor from darkleo - Attachment 3370742
KLD2 v.2.55 factory - HERE
KLD2 v.2.67 factory - HERE
KLD2 v.2.72 factory - HERE
KLD2 v.2.77 factory - HERE
KLD2 v.2.81 factory - HERE

FOR KLD 5
KLD5 v.2.77 - Here

FOR KLD 6
KLD6 v.2.83 - Here
KLD6 v.2.85 - Here

FOR JY
JY v.2.59 -Attachment 3358303
JY v.2.59 with sleep and redesigned sound processor from darkleo from 19.06.2015 - Attachment 3370740
JY v.2.73 - Here
JY v.2.86 - Here

FOR KGL
KGL v.2.53 - Attachment 3358356

KGL v.2.55 with sleep and redesigned sound processor from darkleo - Attachment 3370731

KGL v.2.64 with sleep and redesigned sound processor from darkleo - HERE

KGL v.2.59 - HERE - Universal version for KGL 0-5. Then go to the factory settings and set its type buttons

KGL v.2.72 - HERE - Universal version for KGL 0-5. Then go to the factory settings and set its type buttons

KGL v.2.80 - HERE
KGL v.2.83 - HERE- Universal version for KGL 0-5. Then go to the factory settings and set its type buttons

FOR KGL 1
KGL1 v.2.53 - Attachment 3358314

KGL1 v.2.55 with sleep and redesigned sound processor from darkleo - Attachment 3370732

FOR KGL 2
KGL2 v.2.53 - Attachment 3358315

KGL2 v.2.55 with sleep and redesigned sound processor from darkleo - Attachment 3370733

FOR KGL 3
KGL3 v.2.68 - HERE
KGL3 v.2.84 - HERE


FOR KGL 4
KGL4 v.2.53 - Attachment 3358317

KGL4 v.2.55 with sleep and redesigned sound processor from darkleo - Attachment 3370734

FOR KGL 5
KGL5 v.2.53 - Attachment 3358318

KGL5 v.2.55 with sleep and redesigned sound processor from darkleo - Attachment 3370736

FOR GS
GS v.2.55 with sleep and redesigned sound processor from darkleo - Attachment 3370737
GS v.2.73 - here

FOR KYD
KYD v.2.55 with sleep and redesigned sound processor from darkleo - Attachment 3373782
KYD v.2.59 with sleep - here
KYD v.2.83 - here

FOR BN and HA
BN v.2.43 - here
BN v.2.55 with sleep and redesigned sound processor from darkleo - Attachment 3374877
HA-BN v.2.60 with sleep - here
HA-BN v.2.67 - HERE
HA-BN v.2.73 - HERE
HA-BN v.2.80 - HERE
HA-BN v.2.83 - HERE
HA-BN v.2.85 - HERE

FOR MX
MX v.2.55 - here
MX v.2.67 - here
MX v.2.82 - here

FOR MD
MD v.2.67 - here

FOR KD
KD v.2.81 - here

FOR KSP
KSP v.2.68 - HERE
KSP v.2.79 - HERE
KSP v.2.89 - HERE

FOR INFORMATION:
MCU BN and HA are fully compatible

++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++

24th August 2019, 04:57 PM |#948  
pcmender2005's Avatar
Senior Member
Flag Sheldon Birmingham
Thanks Meter: 119
 
More
Quote:
Originally Posted by AndyLima

Hi! Need a update.img file for my Android 4.2 car gps stereo Rockchip RK3066 !!!!!
My unity was like dead for several months and for my surprise It wasn’t broken. I managed to get the unity in to recovery mode, and after some research I found out I need the to update/ recover the firmware and “update.img or dupdate.img” is what I need and the Ebay company that sold it to me is inactive. Is anyone out there with the identical or similar unit that would be kind to help me by sending me this file Please? Here I send some pictures from my unit, no name or brand, I bought it on July 2015 from autogpsel06 on Ebay.
Android 4.2 Jelly Bean
https://drive.google.com/drive/folde...wCBbBM_IZlq0yG

As I don't have the exact brand of my unit and the unit does not boot, it can only get in to recovery mode, thats why I can't answer your question, I can't get in to settings... but I found a exact look alike unit on the market that uses Android 4.4 instead 4.2 here is the link. As I bought my unit from autogpsel06 on Ebay and they don't answer my emails, can't confirm the units Origin, but I am pretty sure that this is the one! Shenzhen electronics Hui Fei.
http://www.kaigele.com/enus/detail_489_685.html


Kind regards
Anderson Lima

2003-2010 Porsche Cayenne Car Stereo Android 4.2 Sat Nav DVD Radio AUX
2003-2010 Porsche Cayenne Car

Hi if you look at @typos1 profile you will see a link for mega drive and you will find what you are looking for.
7th September 2019, 04:52 AM |#949  
Junior Member
Thanks Meter: 0
 
More
MCU v. mtcb-kld-v.2.20 android 4.2.2_23122014 Model s07
MCU v. mtcb-kld-v.2.20
android 4.2.2_23122014
Model s07
Build #: RK30SDK-ENG4.2.2.23122014.08:59:24
sn: 000D18413B24
12/26/14
Kernel: 3.0.36+
[email protected] #1507
11th September 2019, 05:45 AM |#950  
kinglyr's Avatar
Junior Member
Flag Piraeus
Thanks Meter: 0
 
More
MCU latest version
Malaysk+typos1 and all other xda dev members Good Morning,

I read the MCU read-me at: https://forum.xda-developers.com/wiki/Hui_Fei_Type

From there i found that my MCU manufacturer is: (CZ) CHE-ZHUO

However on your list there is nothing about this MCU

I checked the typos1 lists but i did not find any for CZ
(
https://mega.nz/#F!zRRkVThb!DYBC0LRK-o34ZxDObQo73Q
https://yadi.sk/d/umCvHqCDzHccr/Rock...0Android%208.1
)

Therefore, where can i find what is the latest version for my MCU?

I have the following car dvd-receiver

MCU
MTCE_CZ_V2.75_1
Dec 20 2017 15:03:56

px3 (800x480 W)

Android version
7.1.2

Regards,
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes