[prj][XDANDROID][AOSP][FROYO|GINGERBREAD][31.03]SYSTEM UPDATES

arrrghhh · Nov 20, 2010

raulvola said:
Hi,

I'm expecting stutters and trembling sound in media to be fixed in future kernel versions. Last sound-OK version was zImage_20100916_063423, more than two monts ago.

Cheers
------

This seems to only apply to the DIAM... is that true?

drhadidy · Nov 20, 2010

again the noobie

Im sorry good people...
but i read the word overclocking and was trying to get its meaning but i couldnt understand...
what is meant by overclocking?
is it a good thing to do?? is it for noobies to do or use or better to use the normal installs??
thx alot

_ptr · Nov 20, 2010

drhadidy said:
Im sorry good people...
but i read the word overclocking and was trying to get its meaning but i couldnt understand...
what is meant by overclocking?
is it a good thing to do?? is it for noobies to do or use or better to use the normal installs??
thx alot

Overclocking is, in few words, when your force the processor to perform at a higher frequency than default..

If it's a good thing, I'm not entitled to say, but I don't use it personally.

Maybe reading this post can help you make your descition

bobzero · Nov 20, 2010

Just tried a fresh install of FRX03 with latest zimage rootfs, ect. I appreciate and truly feel grateful that there any kind and able fellows willing to continue to bring Android to our older devices.

I noticed that every time I power down from android and boot back into windows, that my WM clock has jumped ahead 5 hours. It shows the correct time In Android and the correct time in WM before launching haret. Also the time zone is set correctly still.

Any ideas why this might be happening?

Tesla84 · Nov 20, 2010

..

Thank you for the "b. there's board-htcraphael-navi.wake=1 option specified", now i can WAKE my phone, LOL !!!

Sherri1023 · Nov 20, 2010

bobzero said:
Just tried a fresh install of FRX03 with latest zimage rootfs, ect. I appreciate and truly feel grateful that there any kind and able fellows willing to continue to bring Android to our older devices.

I noticed that every time I power down from android and boot back into windows, that my WM clock has jumped ahead 5 hours. It shows the correct time In Android and the correct time in WM before launching haret. Also the time zone is set correctly still.

Any ideas why this might be happening?

This happens because Windows Mobile is in sleep mode causing everything to stop while you are running Android. Then when you boot back to WM everything works again.

bobzero · Nov 20, 2010

Sherri1023 said:
This happens because Windows Mobile is in sleep mode causing everything to stop while you are running Android. Then when you boot back to WM everything works again.

ah I see. It does exactly 5 hours every time, even if I've been in android for 1 minute.

Sherri1023 · Nov 20, 2010

bobzero said:
ah I see. It does exactly 5 hours every time, even if I've been in android for 1 minute.

Don't know what you mean about that part but you get my point.

caldito · Nov 20, 2010

Clock Drift

I have found that running the lastest kernel my touch pro is having a clock drift of exactly 1 second per minute. That means local clock is 24 minutes behind per day

has anybody seen the same?

Sherri1023 · Nov 20, 2010

caldito said:
I have found that running the lastest kernel my touch pro is having a clock drift of exactly 1 second per minute. That means local clock is 24 minutes behind per day

has anybody seen the same?

i am having that to but it is not that bad.

chrialex · Nov 20, 2010

Install Clocksync from market (its free), keeps it up-to-date.

Sherri1023 · Nov 20, 2010

chrialex said:
Install Clocksync from market (its free), keeps it up-to-date.

Thanks for the advice.

waterproof125 · Nov 21, 2010

_ptr said:
...
All in all the phone was running for 30+ hours without screaming for a charger.
It might be worth mentioning that I'm not using OC and have Task Manager running with auto kill.
As far as I can tell, the .conf file seems to have an effect on the power usage.

I've been following the thread since the RC1 release and don't remember this being mentioned before. Am I wrong?

I've just started testing with the following setup:
-FRX03 system
-11/8 rootfs
-11/11 glemsom kernel

Sorry for the minor novel btw.

30 HOURS?! That's insane! I'll definitely have to try this. How only one other person was interested in this is beyond me. When you said the default .conf, is that the one that is in the conf folder originally? instead of overwriting it with the one in the diamond folder?

I'm assuming you have a diamond if you use the conf in diamond folder. This kinda sounds too good to be true man, as far a I know there aren't major changes between the two, and even if there were then shouldn't all non-diamond users be getting 30 hours? are you sure data was actually on during this trial? (besides the little icon appearing at the top)

I'll try a clean install of FRX03 with the original conf and report the experience, heckuva job guys

OTA updates?! sickkkkkkkkk

ps. what's up with this sherri individual?

Sherri1023 · Nov 21, 2010

waterproof125 said:
30 HOURS?! That's insane! I'll definitely have to try this. How only one other person was interested in this is beyond me. When you said the default .conf, is that the one that is in the conf folder originally? instead of overwriting it with the one in the diamond folder?

I'm assuming you have a diamond if you use the conf in diamond folder. This kinda sounds too good to be true man, as far a I know there aren't major changes between the two, and even if there were then shouldn't all non-diamond users be getting 30 hours? are you sure data was actually on during this trial? (besides the little icon appearing at the top)

I'll try a clean install of FRX03 with the original conf and report the experience, heckuva job guys OTA updates?! sickkkkkkkkk

ps. what's up with this sherri individual?

hmm?Nothing up with me just mad at arrregg and his rudeness.

babijoee · Nov 21, 2010

Fixed download link

thanks R^7z for pm and preggy

Sherri1023 · Nov 21, 2010

babijoee said:
Fixed download link
thanks R^7z for pm and preggy

I had found a fix that would fix the random shutoffs that happens in our builds just making sure it works before i give out any more info about it.I had also found another app that would give optimize the battery and give you better info on how much battery life you have and it adds other root features to help improve performance and the battery life as well so check back shortly.

At this thread http://xdaforums.com/showthread.php?t=830836

vaughnmr · Nov 21, 2010

Sherri1023 said:
This happens because Windows Mobile is in sleep mode causing everything to stop while you are running Android. Then when you boot back to WM everything works again.

LMAO!!!!!!!

No... it's the Twilight Zone time change.

waterproof125 · Nov 21, 2010

So I really have no clue what I'm doing wrong, I copied all of the newest files onto my SD as per usual, got the right files and the correct startup, and the update-FRX03.zip has been renamed to update.zip

BUT...

I get a little android and a yield type sign (and a loading bar for a few seconds) in the center of my screen after it runs for a bit but before the calib screen and the phone seems to freeze. I assumed this was the freezing that was supposed to happen after the update so I restarted the phone and booted haret again and after running though all of the code, it does the same thing.

Pressing the home button makes text appear on the screen stating that it is in Android system recovery, giving the message:

Code:

E:Can't find MISC :
E:Can't find MISC :
Finding update package...
E:Can't mount /sdcard/update.zip
Installation aborted.
E:Can't find MISC :

um help?

I've already tried deleting the data.img
Is a existent data.img needed to run the updater?

cheers

arrrghhh · Nov 21, 2010

waterproof125 said:
...
um help?
I've already tried deleting the data.img
Is a existent data.img needed to run the updater?

Sounds like the update failed... in that case, download the full system image and replace that file with your existing system.ext2 file. Rename it to match - also, delete your update.zip. For good measure, start with a new data.img again and you should be good

Sherri1023 said:
hmm?Nothing up with me just mad at arrregg and his rudeness.

I might be rude, but I certainly don't lie and spread false rumors. I'm done talking about it like this - simply do this for me.

Don't post unless you are asking a question that hasn't been asked before, or you have a helpful suggestion like you just posted earlier. Don't answer questions if you don't know the answer, and do NOT spread false rumors about viruses or any other such nonsense.

danbutter · Nov 21, 2010

colo-natas said:
This doesn't work for me, either.
Have you tried using an alternate browser? It just occurred to me I have only been using the default browser on the phone.

I have tried as many alternate browsers as I could and same thing...single frame only.

[prj][XDANDROID][AOSP][FROYO|GINGERBREAD][31.03]SYSTEM UPDATES

Inactive Recognized Developer

Member

Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Retired Forum Moderator

Senior Member

Senior Member

Senior Member

Inactive Recognized Developer

Senior Member

Similar threads

Top Liked Posts