Ah, personally i only recommend it so you can use noatime, other than that the sdcard tweak (which is debate-able) so.. I HIGHLY recommend to NOT use the swappiness tweak, it sets swappiness to 0, which disables swap/zram ...
[KERNEL][I9000] TalonDEV 0.5.1-RC1 (0.6.0.1) [OC/UV][VoodooSnd v10][ZRAM][EXT4]
- Thread starter existz
- Start date
Ah, personally i only recommend it so you can use noatime, other than that the sdcard tweak (which is debate-able) so.. I HIGHLY recommend to NOT use the swappiness tweak, it sets swappiness to 0, which disables swap/zram ...
+1 .. i started from stock deodex JVH rom, flash Talon kernel using Odin and get bootloop
No, the code is only for nexus s sources (hence why its in CM7, since it uses nexus s kernel sources)...its not available for i9000 gingerbread, but voodoo color is added (same as it was in froyo)
I will at some point, there's actually a few things I want to put in CWM, such as those...but right now we are working on a few other things..prioritys...but I will do it at some point
Other thing please, can you diffuse the updates throw ROM Manager(but you have to make a CWM versions :\) ? Is it possible ?
IMO classical RCU seems to give best performance, atleast in my experience...also we use our own lmk settings, kodos96 has a lmkset added, you can actually adjust different lmk settings in /etc/ram.conf ...theres list of different presets, just change the preset= value to whatever preset, or you can make your own preset.. but the default thats used in 0.2.1 is recommended, its been highly tweaked and tweaked for zram
Yea lower min brightness is on the list
..personally one of my most missed things from froyo, ill prob work on adding it soonYea lower min brightness is on the list
Maddddd
existz u da man
EDIT: btw, the new voltage control version now allows you to toggle governor and scheduler too
so 1 app for most of your needs
Last edited:
Was waiting this kernel for a few days, from what i saw, it is a mix of fugumod and GTO kernel, which are two kernel that i love. Testing it right now and i'm really happy. I'm experiencing some lag with graphics.I'm getting something like 9 fps with lava test from Quadrant Standart. I'm using ondemand governor and SIO scheduler OC'ed to 1.2Ghz and UV following the voltage from TK-Glitch kernel. I know it's not the same kernel, but these setting always worked good on my phone ^^.Also, I'm on Goatrip 2.0-RC1. I'll try in a few to start from a clean install to see if it change something. Beside that, i have nothing to say other than i'm waiting next release sticking with this one and i added this page to my favorite
@existz
You didn't answer, what maube a reason of bootlooping after flashing kernel, i tried everything, via Odin, Heimdall, sgs kernel flasher - the results are the same.
Using Darky's 2.3.3 JVH. Before flashing i'm wiping dalvik. FS are all ext4.
So....?
You didn't answer, what maube a reason of bootlooping after flashing kernel, i tried everything, via Odin, Heimdall, sgs kernel flasher - the results are the same.
Using Darky's 2.3.3 JVH. Before flashing i'm wiping dalvik. FS are all ext4.
So....?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
124TalonDEV is for use with Samsung Gingerbread Roms
This kernel is still in a heavy development stage! So there may be bugs!! (hence the DEV tag)
Current Co-Devs - Kodos96, Ytt3r & zacharias.maladroit
As always, flash at your own risk, im not responsible for any damages!
Talon Source can be found on Github and Google Code
Stay up to date with latest changes on Twitter
Remember, I cant fix stupid or lazy. Please read the whole OP and the first and last 5 pages of this thead!
Code:[B]Kernel Features[/B] Based on latest Samsung Opensource Gingerbread Sources Voodoo Lagfix and Sound v10 Voodoo Color for 2.3.4 Ported Nexus S Framebuffer mDNIe based on Speedmod BLN Support from Neldar Custom Voodoo CWM 3.0.0.5 Updated to latest Jhash3 340MB RAM Free (w/ 720p) OC/UV support up to 1.2ghz Swap + ZRAM (compcache) Wired Headset Support Audio Dock Support Battery Polling set to 60s Set Light Sensor Polling to 1s Sched_Autogroup v4 (per sessions) TinyRCU (smaller memory footprint) SIO / VR / BFQv2-r1 IO Schedulers Tweaked Ondemand Governor Stochastic Fair Blue (SFB) network scheduler Updated to latest Samsung Source Lots of Upstream Linux/AOSP fixes CIFS/TUN Support
Upcoming Features <<-Dont ask when!
More tweaks/options added in CWM
Plus more! Alot of things still to come..
--Known Issues
>>Official Talon Issue Tracker<<
Mirrors for all builds can be found HERE
Now CWM flashable!
NOTE Zip will wipe cache/dalvik cache during flash, so first boot will take longer
NOTE: BIGMEM version breaks 720p video recording
Stable Versions
TalonDEV 0.5.1-RC1 I9000 340MB and BIGMEM
Test Versions
TalonDEV 0.6.0.1 I9000 340MB and BIGMEM NEW OC APP!
NOTE Make sure you are using BusyBox v1.17 or 1.19 before flashing, as
v1.18 (as most roms use), does not have runparts and scripts will not work
Code:[B][SIZE=3]Changelog[/SIZE][/B] [B]0.5.1-RC1[/B] new tweaked LMK settings updated 'MemoryFreak 1.23" updated to JVT initramfs updated to 2.6.35.13 base updated latest samsung source added new kernel boot logo disabled sched_autogroup disabled more kernel debug upstream fixes for ZRAM upstream fixes for ext4 upstream fixes for mm/sched upstream fixes for ARM/S5P upstream fixes for rcu/TinyRCU upstream fixes for lowmemkill driver use 'hard float' optimizations set usb charging lock to 100mhz USB signal and speed improvements introduce OndemandX CPU Governor introduce Smartass2 GPU Governor added sampling down factor to Ondemand fix issue with UV not working correctly switch to TinyRCU (smaller memory footprint) XZ kernel compression; initramfs to none tons of general fixes from zacharias.maladroit Linaro Android (GCC 4.5.4) + O2 and Graphite flags [B]0.4.3[/B] reverted back to 2009q3 toolchains disabled GPU OC (does not fully work yet) [B]0.4.2[/B] update to 2.6.35.13 (still shows 2.6.35.7) added BFQv2-r1 I/O Scheduler (SIO default) fully ported mDNIe driver from nexus tweaked mDNIe UI settings similar to speedmod fix colour multiplier to avoid yellow tint tweaked lowmemorykiller driver revert lmk settings similar to old #7 added boot progress bar during boot arm: Allow CPU-supported unaligned accesses add support for BT_PAN, Apple Magic Mouse + more fix .int_volt on higher frequencies (thnx Cy4n1d3) set kernel log buffer size to 4kb (from 128kb) ashmem: fix deadlock when system is low on memory compiled with 4.5.1 toolchains (RIL with 4.4.3) removed unused governors; conservative now module UV for LCD 3.0v->2.6v, RAM 1.8v-1.6v, ADC 3.3v->3.0v some PM and battery runtime upstream fixes [B]0.4.1[/B] ported nexus s framebuffer driver ported Voodoo Color for 2.3.4 (control w/ Voodoo app) updated to voodoo sound v10 fixed compass postion for i9000 some rework/cleanups to initramfs introduce 1300mhz version CFS load balancing improvements some fs/sched improvements add fixes from CK patchset updated to JVQ initramfs contents introduce V(R) IO Scheduler tweaked voltages some disabled iostats for less overhead tons of fixes from zacharias.maladroit some fixes to sched_autogroup newly tweaked lowmemkill settings [B]0.3.1[/B] added sched_autogroup patch added configurable gpu oc (for future use) fix BLN not working for some users introduce non-oc version of talon independent oc versions (1200/1400/1440) compile wifi as Os instead of O2 set wlan power on delay back to 80ms use samsung bootanim when no custom zip found [B]0.2.2R2 - JVP[/B] Enabled Voodoo Debug for Lagfix Fixed mounting issues with system in cwm [B]0.2.2 - JVP[/B] added 1.6ghz as max overclock set usb charging clock to 200mhz some GPU changes from Morfic few updates to wifi driver from aosp some security improvements from fugumod use Speedmod color/sharpness fix added "power off" & "reboot download" to cwm added "voodoo lagfix menu" to cwm add upstream fix for ZRAM (compcache) added voodoo JVP 2.3.4 initramfs cpuidel menu governor upstream fix plus few other random fixes [B]0.2.1 - JVH/JVO/JV9+ ONLY![/B] added zram (compcache) updated lowmemkill settings compiled with O2 instead of Os cwm verify battery stats wiped fix issue with 1ghz step switch back to ondemand governor reverted most upstream fixes disabled printk in kernel more random fixes/updates updated to voodoo sound v9 added BLN support from neldar switch to gzip initramfs compression new boot logo (courtesy of Vivified) possible fix for wifi sleep battery drain updated to latest samsung source fixed KTLO with new samsung source updated to jvh version magic and initramfs compiled logcat (logger.ko) as a module [B]0.1.6[/B] set initial max frequency to 1ghz enable asynchronous I/O support disable some kernel debug some ARM optimizations slight cosmetic change to CWM new lmk settings from kodos96 reverted OOM rework/fixes attempt to fix CIFS issue [B]0.1.5[/B] Only use gamma 2.2 More upstream fixes and reworks Add BigMem version (no 720p recording) Adjust LMK settings for tweak app Adjust default readahead values [B]0.1.4[/B] Add 341MB RAM (kodos96's config) Revert back to stock refresh rate [B]0.1.3[/B] Revert back to old touchkey driver Fixed Issue with KTLO Compiled sound/soc/codecs as O2 [B]0.1.2[/B] OC support up to 1.2ghz Interactive governor by default Add CIFS/TUN support Few upstream improvements [B]0.1.1[/B] Initial release
To check frequency time used, use Storm717's app HERE
Adjust CPU/GPU OC/UV settings with Shane87s app 'Control Freak' HERE
Thanks to Hardcore, Ytt3r, Xcal, Supercurio. Raspdeep, sztupy, DG, Laststufo, Kodos96, zacharias.maladroit, Kang, lippol94, Netarchy, TheEscapist, TKGlitch, Lukiqq and Morfic (if I forgot you, let me know)160.4.4.22 Public Test
0.4.4.22
Changelog since 0.4.4.21
- ARM: more aosp/upstream ARM fixes
- cpufreq: fixed ondemandX wakeup issues
- voodoo: add new i9000 partition table support
- usb: read/write speed hack for mass storage
- reverted: parts of infuse wifi and power fixes
NOTES
UPDATE: So it seems the bluetooth causing corruption issue is resolved in this release.
Also added I9000 BIGMEM version. These versions will break 720P video recording.
A new partition table added for newer SGSs, hopefully this fixes the issue some
of you have not being able to convert with voodoo13UPDATE
0.6.0.1
- updated su binary to v3.0.3.2
- updated to XWJW1 initramfs contents
- PM: introduce library for device-specific OPPs
- rtc alarm: fix bad index when canceling alarms[]
- Optimized ARM RWSEM algorithm
- pmem: fix buddy free memory corruption bug
- binder: Quiet binder
- time: Compsensate for rounding on odd-frequency clocksources
- sdhci: 8-bit data transfer width support
NOTE
I might have found an issue preventing su binary from getting copied to correct location, I had already updated so I did not notice it till just now.., so if your binary version still shows 3.0.3 I am aware of the issue and will have it fixed in next release. In the mean time just use the Superuser app to update binary if you want130.5.2.5 Public Test
UPDATE
0.5.2.5
- updated lmk settings from Pikachu01
NOTE
New modified LMK settings should prevent memory leak, let me know how these work for you guys.., they are a little more aggressive than the recent talon LMK settings..
We are working out a couple bugs with new OC App, once its ready for release ill get a new test build up.. To OC, simply place script of choice in /etc/init.d/ and set permissions
