[ROM][4.0.4][GT-S7562] KyleOPEN ROM v3.4.0 FIXED (for Galaxy S Duos) 26 July Update
- Thread starter cheatman
- Start date
Thanks for the assistance..I'm now able to install kyle open ROM on s duos..but I would like to know that how to over clock the CPU..currently it doesn't allow me to over clock its on 1ghz..want it to over clock to 1.2ghz..please advice..thanks
Sent from my GT-S7562 using xda app-developers app
We need a custom kernel with OC support in order to overclock it
Either cheatsman or VamshiStunner may be able to make such kernel
Once we have OC supported kernel they can overclock it a lot more higher like 1.8 GHz
European FW
Hi cheatman,
Do you know if there are some differences between the ROM you took as a base XXALJ4 and the one currently released in Europe (AP: S7562XXALJ6, CP: S7562XXLH3, CSC: S7562OXXALJ6) ?
And are there any requirments for baseband?
Thanks
Hi cheatman,
Do you know if there are some differences between the ROM you took as a base XXALJ4 and the one currently released in Europe (AP: S7562XXALJ6, CP: S7562XXLH3, CSC: S7562OXXALJ6) ?
And are there any requirments for baseband?
Thanks
@kaza0206:
The kyleopen device framework (kyleopen is samsung codename for our phone) does NOT have an sdcard (i.e. internal memory).
What this means:
The Galaxy S Duos has only one flash drive shared between the system partition and the data partition. They are logically separated, but reside on the same physical drive / device.
This means that:
The Galaxy S Duos cannot move apps to sdcard because the sdcard and internal memory are one and the same. Therefore, you can only move apps to the external SD (which is your external microSD card).
How to do it:
Use Link2SD. Get it from the market. Take your microsd, back it up, repartition and format it into two active FAT32 partitions and restore your data to the first partition (windows will only see the first one anyway. Then, use Link2SD to link applications to the external SD card. Lookup info on Link2SD on google and in the market for more details.
@tristone:
The ROM uses XXALJ4 as a stock base. I chose the XX as release due to it being "cleaner" to begin with ( XX = Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom). As a side note, the ROM does not touch / change baseband at all and does not flash modem drivers.
Let's go through a complete summary of what the ROM does NOT do:
All in all it's pretty safe to flash. In any event you can recover your device by downloading your stock firmware of choice from www.samfirmware.com. All you need to do is be able to boot in download mode.
Hope this helps. Cheers,
C.
The kyleopen device framework (kyleopen is samsung codename for our phone) does NOT have an sdcard (i.e. internal memory).
What this means:
The Galaxy S Duos has only one flash drive shared between the system partition and the data partition. They are logically separated, but reside on the same physical drive / device.
This means that:
The Galaxy S Duos cannot move apps to sdcard because the sdcard and internal memory are one and the same. Therefore, you can only move apps to the external SD (which is your external microSD card).
How to do it:
Use Link2SD. Get it from the market. Take your microsd, back it up, repartition and format it into two active FAT32 partitions and restore your data to the first partition (windows will only see the first one anyway. Then, use Link2SD to link applications to the external SD card. Lookup info on Link2SD on google and in the market for more details.
@tristone:
The ROM uses XXALJ4 as a stock base. I chose the XX as release due to it being "cleaner" to begin with ( XX = Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom). As a side note, the ROM does not touch / change baseband at all and does not flash modem drivers.
Let's go through a complete summary of what the ROM does NOT do:
- Does NOT flash new radio firmware
- Does NOT change baseband
- Does NOT flash a kernel (you have to manually flash one)
- Does NOT flash a new recovery
- Does NOT format your external SD
- Does NOT work if you are running another kernel than listed in the first posts
All in all it's pretty safe to flash. In any event you can recover your device by downloading your stock firmware of choice from www.samfirmware.com. All you need to do is be able to boot in download mode.
Hope this helps. Cheers,
C.
Last edited:
Thanks, Great Job!!!
The ROM dont suport overclock?
---------- Post added at 06:50 PM ---------- Previous post was at 06:35 PM ----------
1.8GHz??
The ROM dont suport overclock?
---------- Post added at 06:50 PM ---------- Previous post was at 06:35 PM ----------
We need a custom kernel with OC support in order to overclock it
Either cheatsman or VamshiStunner may be able to make such kernel
Once we have OC supported kernel they can overclock it a lot more higher like 1.8 GHz
1.8GHz??
I can't really start doing kernel development for this device yet. However, I expect it to overclock no more than 1.4GHz in a pretty stable configuration and 1.7GHz maximum. Overclocking it would create little performance boost as the lack of a properly performing GPU (i.e. graphics card) will still prevent the device from rendering HD video and most HTML5 intensive web pages. Menus and scrolling would improve a little though
We would need a complete OS overhaul, which is impossible at this time because CyanogenMod has no support for Dual-Sim configurations, so that means a LOT of work and code to write. For the time being we are stuck with the Samsung Dual-Sim phone, contacts, messaging and settings packages. Which means we need to stick with the Samsung framework-res.apk. Which is bad... and we should feel bad...
PS: because dropbox is threatening to cancel my account due to heavy traffic, I have mirrored the ROM on Google Drive as well. It's nice to see the ROM is popular. Thanks for the support guys and let me know if you find bugs or have suggestions to improve the ROM.
Cheers,
C.
We would need a complete OS overhaul, which is impossible at this time because CyanogenMod has no support for Dual-Sim configurations, so that means a LOT of work and code to write. For the time being we are stuck with the Samsung Dual-Sim phone, contacts, messaging and settings packages. Which means we need to stick with the Samsung framework-res.apk. Which is bad... and we should feel bad...
PS: because dropbox is threatening to cancel my account due to heavy traffic, I have mirrored the ROM on Google Drive as well. It's nice to see the ROM is popular. Thanks for the support guys and let me know if you find bugs or have suggestions to improve the ROM.
Cheers,
C.
custom kernel
key cheatman
thanks for your valuable reply,
now i flash v3 kernal using with stock rom it works great
i m also planning to flash kleycustom rom 1.0.3 after 2-3 days
---------- Post added at 05:23 PM ---------- Previous post was at 05:19 PM ----------
Dear Cheatman
what is flash counter?
and how much no of time we can flash any custom rom/kernal on s7562,
we can reset to 0 for s7562?
thanks in advance
key cheatman
thanks for your valuable reply,
now i flash v3 kernal using with stock rom it works great
i m also planning to flash kleycustom rom 1.0.3 after 2-3 days
---------- Post added at 05:23 PM ---------- Previous post was at 05:19 PM ----------
Dear Cheatman
what is flash counter?
and how much no of time we can flash any custom rom/kernal on s7562,
we can reset to 0 for s7562?
thanks in advance
Modify AKP to Run on S7562
Hi Cheatman,
i attached below APK files from my last phone micromax A90s,
can you make this file run on S7562, i tried by pasting apk on /system/app..
but when i start that apk error message shows unfortunately XXX application close.
please help me or guide me how to modified if you know
thank u good bye
Hi Cheatman,
i attached below APK files from my last phone micromax A90s,
can you make this file run on S7562, i tried by pasting apk on /system/app..
but when i start that apk error message shows unfortunately XXX application close.
please help me or guide me how to modified if you know
thank u good bye
We still don't have OC kernel so can't overclock it as of now
---------- Post added at 07:51 PM ---------- Previous post was at 07:43 PM ----------
@cheatman: can you add the vold.fstab mod for swapping internal and external sd cards? I felt many of us might need it as our phone has little internal memory all downloads and other stuff go in it
I have been running your ROM for a while now and it is lag free
and much better than stock rom Also if you are planning to add init.d scripts can you add app2sd script too?
In your ROM flashing tutorial you said that everything n phone except sd card will be erased but nothing got erased from my phone so you can edit it
Hello, have a question Rom Portuguese language? In rom already gives for applications go to the SD Memory Card?
You could make a Instructions on you tube ...
Congratulations ROM!
thank you
You could make a Instructions on you tube ...
Congratulations ROM!
thank you
on kylerom1.0.3 i am not able to use internet, all each and every time browser closed and displayed error "unfortunately internet closed " also in dolphin browser it will not work
can any one observed same problem if yes than please report it
music player not found in custom rom
Hi All
Have any others Problems with the Internet Explorer in this Rom?
When i want type lettters in a Website keyboard dont open and the internet explorer close after a short time.
And the second is, i cant open the wheather settings in lockscreen.
Any Others with this problem ? Whats wrong on my phone ?
Chris
Have any others Problems with the Internet Explorer in this Rom?
When i want type lettters in a Website keyboard dont open and the internet explorer close after a short time.
And the second is, i cant open the wheather settings in lockscreen.
Any Others with this problem ? Whats wrong on my phone ?
Chris
@man2droid: the browser is stock so no changes have been made there. Maybe try clearing the cache? I am using Chrome and have no issues.
@allspark2020: init.d script support is already in the latest kernel. The ROM had it to begin with. Also, vold.fstab cannot be used for our phones. We need to use /system/sbin/sdcard binary, but it does not accept any mount point other than /mnt/sdcard. This means we cannot mount /data/media as external SD. I have, however, been able to mount the external SD as sdcard and use my microsd as internal memory, but I don't think this scenario is acceptable for users in general. Some may not have microsd cards. Maybe I will release this as an add-on. In any case, the internal memory won't be usable anymore, only microSD (and you need a fast microSD).
@heartblue: the ROM supports Portugues both Brasil and Portual variants. See above explanation for microSD storage. I will NOT make youtube videos for the simple process of installing a CWM zip. Thanks for your kind words.
@Ceejay72: weather widgets were removed in this ROM.
Maybe I will make add-on to disable internal storage (make it all available to /system) and only use microSD as internal memory. I will think about it later today and run some tests. This should be extremely easy to do, but I need to make a new kernel to disable sdcard fuse filesystem from being mounted. Then all can be done through vold.fstab modding.
Would anyone be interested in this?
Cheers,
C.
@allspark2020: init.d script support is already in the latest kernel. The ROM had it to begin with. Also, vold.fstab cannot be used for our phones. We need to use /system/sbin/sdcard binary, but it does not accept any mount point other than /mnt/sdcard. This means we cannot mount /data/media as external SD. I have, however, been able to mount the external SD as sdcard and use my microsd as internal memory, but I don't think this scenario is acceptable for users in general. Some may not have microsd cards. Maybe I will release this as an add-on. In any case, the internal memory won't be usable anymore, only microSD (and you need a fast microSD).
@heartblue: the ROM supports Portugues both Brasil and Portual variants. See above explanation for microSD storage. I will NOT make youtube videos for the simple process of installing a CWM zip. Thanks for your kind words.
@Ceejay72: weather widgets were removed in this ROM.
Maybe I will make add-on to disable internal storage (make it all available to /system) and only use microSD as internal memory. I will think about it later today and run some tests. This should be extremely easy to do, but I need to make a new kernel to disable sdcard fuse filesystem from being mounted. Then all can be done through vold.fstab modding.
Would anyone be interested in this?
Cheers,
C.
Similar threads
- Poll
- Locked
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
394Welcome to the KyleOPEN ROM for Galaxy S Duos
(Dual-Sim Phone / GT-S7562 device model)
KyleOPEN ROM Features:
- Based on stock S7562XXBMD6 ROM
- Debloated (see list of removed bloat below)
- CM9 Imported (see list of CM9 packages below)
- Deodexed / zipalligned (can be themed!)
- Rooted (incl. insecure kernel using chainfire modded adbd method)
- Custom boot image enabled
- Custom boot sounds enabled (wav only!)
- Busybox support
- Overclock / Governor Kernel
- init.d script support
- Add-on support
- OTA Update engine
- Google Now included
- Flashplayer support (download flash APK from here)
- Samsung S Voice support through add-on (see post #3)
- QtADB Support (get it here)
List of removed packages:
List of imported CM9 packages:
Code:- CM9 Apollo Player (add-on) - CM9 Keyboard - CM9 Launcher (Hello Trebuchet!) - CM9 EMail & Exchange - CM9 Browser - CM9 Gallery (add-on) - CM9 File Manager - Magic smoke live wallpapers
Installation instructions:
WARNING: Flashing this ROM will make the orange triangle appear and increase the flash counter. Flash at your own risk, I am not responsible for your actions. Follow the instructions below ONLY if YOU are sure of what you are doing. Otherwise stop here. You can reset the counter and remove the triangle using the app developed by chainfire (triangle remover).
Installation Details & HowTo:
- The GT-S7562 has a download mode and a recovery mode. Both are boot modes that allow the device to start but enter a different configuration mode than regular Android start mode. Think of them like starting your PC and entering the BIOS instead of loading Windows as usual.
- The "download mode" is a boot mode that allows flashing bit-by-bit (very low level) data to partitions on your device. To enter download mode on the S7562 do the following: make sure the device is well charged (over 50%); remove all cables (this is important); power it off (don't reboot); hold volume down + home and power on the device (volume down+home+power). Then a warning will be displayed on screen. You must press Volume Up to enter download mode.
- As long as you can enter "download mode" you can recover your device. While in download mode, you can use the ODIN tool to flash recovery, boot and ROM images.
- The "recovery mode" is a boot mode that allows "safe mode" changes to be performed on the device. This is done using CWM, a tool that can be used to automate Android system changes to system files, partitions etc. To enter recovery mode on the S7562 do the following: make sure the device is well charged (over 50%); remove all USB cables (this is important); power it off (don't reboot); keep volume up + volume down + home and power on your device.
- To navigate in recovery mode, use the volume buttons to change active selection and the home button to make selections. The back button works as back button. When done working with recovery, go back all the way and select option to reboot system to boot your device normally.
- Before installing KyleOpen ROM, make sure you are running XXBMD6 as base ROM. If you skip this step, you may have network and signal problems after installing KyleOpen ROM. So, download the ROM image here and flash it from download mode using ODIN and PDA button BEFORE you continue!!!
- Download to your PC the custom recovery image that enables CWM, if you don't have it already, from here
- Reboot in download mode to flash CWM
- Unzip the file in your computer and start ODIN.
- Click the PDA button and select the "kyleopen-cwm5-v3.tar.md5" file.
- Connect your phone that is already in download mode. ODIN will display it as being connected on a COM port.
- Do not change any other options. Just click the "Start" button and wait. In about 1 minute, on your device there will be a loading bar displayed. Once done the phone will reboot itself normally. ODIN will tell you the flash was OK and restart your device. This operation will increase the flash counter and make the orange warning triangle appear. This is normal and is not a problem. From this point on, you can boot in recovery mode and flash CWM zips.
- Let the phone restart normally and boot up completely. Now you are ready to upgrade your stock ROM to KyleOPEN ROM.
Update Instructions:
- Make sure you are running a proper stock ROM (like XXBMD6 or any version of KyleOPEN ROM)
- Download the OTA update utility app attached to this post and install it if you didn't already.
- Run the KyleOpen Tools and check for updates. If your ROM does not have root access it's gonna be slow to start and may not show the proper information, but the update check and download will work just fine.
- Download the update and save it.
- Press reboot in recovery mode.
- Install the downloaded zip.
- Clear cache and davlik cache.
- Reboot system.
- Hit the thanks button or you will be ignored in the thread!
Note: The recovery ZIP also contains the stock recovery image. The stock ROM can also be found on http://www.sammobile.com
Mirrors for use without OTA updater:
Alternate download methods in case you don't want or can't use the OTA update utility can be found below. Download the ZIP files, copy them to your device and reboot in CWM to flash them.
Credits:
Code:- Project Flulid team, for build.prop tweaks - leolawliet for disabling of CPU rendering - Mirko ddd for back button to kill app mod - einst31n for the facelift of the ROM logo and the default theme - VamshiStunner for his awesome work on the kernel, especially OC! - hybridmd, for the init.s script add-on to swap SD memory cards - P.thina for finding the fix for no network that some users had!!!! - nakedninja42 for face unlock tips - Samsung for the device and software development - Google and the Android community for an awesome OS - The CM9 team for their work on ICS - XDA Developers for letting us post our work, help others and unleash our devices - dsixda & chainfire for their previous work on Samsung devices - Everyone else out there that makes this worth the effort...
Cheers,
C.111Next Version Changelog:
- Next version - Nothing yet... only bug fixes are planned from now on.
Older Changelog:
FAQ & Known Issues:
- I am on stock version XXXXXX, will KyleOPEN ROM work? - I have no idea. Try it and report back. In case you get network problems try a different base. Use XXBMD6 as base whenever possible.
- What baseband is supported - Baseband is not affected by this ROM, it does not change it and any baseband version is compatible.
- My CSC is "unknown", why? - That is normal and the phone works correctly. It works in roaming and all providers.
- My phone requests unlock code - You must unlock EFS to use it on other networks if you purchased it on a contract. This ROM does not unlock your network.
- Notification quickbuttons missing - This is normal. If you want them back flash the "Stock Samsung Theme v1" add-on in post #3 below.
- I want stock theme back! - If you want the stock icons and colors back, then flash the "Stock Samsung Theme v1" add-on in post #3 below.
- Direct Call widgets don't work - These widgets are part of the Trebuchet launcher and only work on CM9. In KyleOPEN, they will not work, due to a couple of intent security limitations. There is no workaround for this problem. If this is bothering you, use another launcher or don't use these widgets.
- Browser white address bar problem - I have no idea what causes this. It is only for some browsers. Use Google Chrome to avoid this problem.
- Cannot change lock screen wallpaper - Go to settings->wallpaper and choose to change both wallpapers. Apply any live wallpaper. Then set a new wallpaper with your favorite app. Alternately, install stock gallery (see post #3 belov), change lock screen wallpaper and then remove or disable it.
- Where is kernel OC??? - The default ROM package starting with version 3.1 does not come with OC as it's unstable and not all users need it. For OC support, install a compatible kernel with OC support from post #3 below.
- How can I get back to stock? - You must download a compatible image from samfirmware.com and flash it using ODIN.
- XXXX doesn't work correctly, what can I do? - Follow the installation steps in the first post. There are no known bugs (things that don't work) in the ROM.
- Some applications force close after installing the ROM - This happens because you did not follow the installation steps provided. Reboot in recovery mode and clear cache and dalvik cache.
Resolved Issues:
101List of compatible Themes:
Flash the themes by rebooting in recovery mode and using CWM to install ZIP. It's a good idea to clear caches and dalvik before testing them out:
- Greenblast Theme by charles111 - Get it here: https://www.dropbox.com/s/2dm0w4hc69jyyfd/the greenblast v2.00.zip (theme thread here)
- PurpleGlow Theme by Mohitash - Get it here: http://xdaforums.com/showthread.php?p=42058670
- BlueGlow Theme by Mohitash - Get it here: http://xdaforums.com/showthread.php?p=42093164
- CyanGloss Theme by Mohitash - Get it here: http://xdaforums.com/showthread.php?p=42170668
- BlueGloss Theme by Mohitash - Get it here: http://xdaforums.com/showthread.php?p=42194443
List of compatible Add-Ons:
These add-ons provide additional functionality to the ROM and do not bork already existing features. None of them are mandatory and you can install only the ones you want. To remove an add-on that was flashed using CWM, simply reinstall the KyleOPEN ROM again and the add-ons you want to keep. There is no other way to uninstall a CWM package with ease.
List of other compatible packages (not mine, not tested, don't ask about them):
List of compatible kernels:
Please note: Regular users should stick with the kernel version included in the ROM by default. If you encounter issues with any of these other kernels, flash the ROM again using CWM to restore the default kernel.
- GitHub link to the KyleOpen 4.0.4 Kernel: https://github.com/cheatman-xda/kyleopen-kernel
- KyleOPEN Kernel v5 - Stock kernel with additional CPU governors, overclocking support, init.d script support, root enabled. Flash directly with ODIN. Credits go to VamshiStunner for his work on governors in this kernel version. NOTE: Although it seems to have OC, it is not working. Setting OC values will not boost the phone's performance as it will run at 1GHz no matter how you configure it.
- KyleOpen ROM Kernel OC1 - Bleeding edge kernel with increased sensitivity, all features activated and custom boot logo image. Only for the hardcore fans and power-users of KOR that know what they're doing.
- xvasek2 - Breakfast Kernels - OC Kernels for everyone, plenty of speeds to choose from. If you really want OC and can't get around with any setup, use these kernels confidently. Don't forget to follow the instructions and check your balls (or instincts for the ladies!) before you proceed. All kernels should be flashed using ODIN.
45Breakfast kernels
Hi 7562 overclockers and tuners.
Considering all pros and cons, I have compiled 14 OC kernels during my today's breakfast. Each one of them has one specific frequency added above standard 1008MHz, beginning with 1.05 up to 1.3GHz. You can find them here:
http://stodulkovi.cz/kyle/breakfast-kernels/
Flash via Odin.
It may not be the smartest solution possible, but it brings overclocking to everyone and it has also some advantages. You don't need to have any OC app (OC is apllied automatically during boot), you don't need to have you phone rooted, you can allways go back simply via Odin.
Cons are, that overclocking process may take you some time and you will probably need to flash more times.
In future I may make universal kernel, which will boot at 1GHz and then user will overclock by app, but do not expect it in days, maybe weeks. It's because I'm happy now at 1,17GHz and "don't repair it, when it is not broken".
How to apply:
- Guess, how fast your phone may be - it depends on size of your balls. (Girls have intuition, so they will allways success on first try! )
- Download appropriate kernel
- Flash via Odin
- If it booloops, then you actually have smaller balls then you think and goto 1.
- If it does not bootloop, you may have bigger balls then you think, you can maybe download faster kernel and goto 3.
If your phone does not run even at 1.05GHz, make sure, that you are flashing 7562. If yes, then you have something between Samsung and death, or I have bug somewhere. Anyway, write me PM. If you want more then 1.3GHz, write me PM, I will make you special kernel.
When flashing, you will probably find a frequency, which does boot, but is unstable - for me it is 1.2, phone resets every few minutes. One frequency less you will be quite stable (for me 1.19GHz), but the phone may reboot once a day or so. Next frequency (for me 1.17GHz) will probably be rock stable.
And - as it is allways with overclocking - you can harm your device, I take no responsibility. But it should be quite safe, the worst I expect is bootloop repairable by safe kernel via Odin.41Yet again, time to rejoice because the KOR version 3.2.0 is out now! Here is the list of goodies included in this latest version:
- v3.2.0 - Memory tweaks (minfree, swappiness, cache, dirty)
- v3.2.0 - Menu button hold to kill app
- v3.2.0 - New system theme by einst31n
- v3.2.0 - New update push notification support
- v3.2.0 - Automatic / manual update checks
- v3.2.0 - Re-design of the OTA update utility interface
- v3.2.0 - Enable/disable custom boot sounds (KOR v3.1.0 and later)
Don't forget to spam the thanks buttons of everyone who made this release possible!
Cheers,
C.
