You OTA upgraded to ICS or Honeycomb? There is not ICS Honeycomb. If you OTA upgraded to ICS, you have the latest bootloader and don't have to worry about it. Otherwise, you need to flash the newer bootloader.
[ROM][P75xx][JB][4.2.2] CyanogenMod 10.1 Nightly Discussions
- Thread starter nakedninja42
- Start date
You OTA upgraded to ICS or Honeycomb? There is not ICS Honeycomb. If you OTA upgraded to ICS, you have the latest bootloader and don't have to worry about it. Otherwise, you need to flash the newer bootloader.
did you flash the modem from pershoots download (http://droidbasement.com/galaxy/roms/cm10.1/p4/) site as mentioned in the first post?
Baseband should be P7500XXLQ8
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
follow the instructions out of the first posts. you need the correct bootloaders, correct modem and the correct cwm-recovery.
Yep and I have done it again just now. I downloaded modem.
Then using MobileODIN, partition MODEM, I gave the file modem.tar.md5, did the md5 check and flash.
Tablet reboots correctly. I did the same for flashing CWM6 and worked.
Then using MobileODIN, partition MODEM, I gave the file modem.tar.md5, did the md5 check and flash.
Tablet reboots correctly. I did the same for flashing CWM6 and worked.
Anyone else has this in Trebuchet's settings?? Funny as hell if you ask me...
https://plus.google.com/u/0/117962666888533781522/posts/1YtBssVmExn
Voice call
To whom it may concern,
The voice call testing results for cm-10.1-20130103-NIGHTLY-p4.zip:
- Flashed CWM_I9103XXLQ3_Modem using CWM 6.0.2.7;
- No wipe, no extra apps installed, rebooted;
- Lock screen will always display "Operator name \n Emergency only"
- I can make voice calls but the speaker is by default off. It can be easily switched on during the phone call by pressing the speaker icon/button within Phone app.
- The sound quality is excellent;
- No issues when screen gone off.
- I cannot end the call. Pressing the red end call button disables it but the call is still on. The other party needs to end the call otherwise you'll make a nice gift to the telco.
- I cannot receive calls!!! The caller will hear the calling sound but the tablet will not react, no ring, no notification;
- I cannot change the Phone app -> Settings -> Call forwarding settings. Got "Network or SIM card error". This is not a specific modem issue. It happens with CWM_P7500XXLQ8_Modem as well.
- Not tested BT audio call.
To whom it may concern,
The voice call testing results for cm-10.1-20130103-NIGHTLY-p4.zip:
- Flashed CWM_I9103XXLQ3_Modem using CWM 6.0.2.7;
- No wipe, no extra apps installed, rebooted;
- Lock screen will always display "Operator name \n Emergency only"
- I can make voice calls but the speaker is by default off. It can be easily switched on during the phone call by pressing the speaker icon/button within Phone app.
- The sound quality is excellent;
- No issues when screen gone off.
- I cannot end the call. Pressing the red end call button disables it but the call is still on. The other party needs to end the call otherwise you'll make a nice gift to the telco.
- I cannot receive calls!!! The caller will hear the calling sound but the tablet will not react, no ring, no notification;
- I cannot change the Phone app -> Settings -> Call forwarding settings. Got "Network or SIM card error". This is not a specific modem issue. It happens with CWM_P7500XXLQ8_Modem as well.
- Not tested BT audio call.
Last edited:
Nelp2 is the correct base ban from pershoot.... 7500/10.1
Sent from my GT-P7500 using xda premium
Sent from my GT-P7500 using xda premium
Another post above said me that NELP2 is not correct. How can I be sure?
Sent from my GT-N7100 using Tapatalk 2
Sent from my GT-N7100 using Tapatalk 2
Thanks!
I'm huge into rooting but didn't care to root my tablet since I've owned it since Aug. 2011. After I found out Samsung wasn't going to update it I was distraught because it definitely is capable of handling 4.2. So I decided to finally stop being lazy and root it and the ROM is pretty damn stable and I appreciate that! Keep up the great work!
I'm huge into rooting but didn't care to root my tablet since I've owned it since Aug. 2011. After I found out Samsung wasn't going to update it I was distraught because it definitely is capable of handling 4.2. So I decided to finally stop being lazy and root it and the ROM is pretty damn stable and I appreciate that! Keep up the great work!
NELP2 (uploaded on Dec, 5th) is the "official" modem published by pershoots .
I can confirm that the most recent nightly is working with:
- NELP2
- XXLQ8 .
- CWM_I9103XXLQ3
Of course... flashing the modem may brick your unit - do it on your own. I don't want to be blamed for brick(s) production.
I personally love the new UI and the unified interface it brings to what has become the "big three" of device dimensions. There are a handful of roms out there that have brought back Tablet UI "from the dead". I would imagine the better ones will be cherry-picking from CM as pershoot develops, so you can have your CM10.1 as well as Tablet UI.
I love it too. I do think the home button etc should be on the left, and not centered, but otherwise I prefer everything about the notification bar, quick settings, etc...
---------- Post added at 10:28 AM ---------- Previous post was at 10:21 AM ----------
Updating to TWRP 2.3.3.0 should resolve this. Although I have it updated on my tab, I haven't tested the 0/0 folder issue on my tab yet, but it definitely fixed it on my phone (SGS3)
Don't want to start a flame... it is a matter of taste.
In my opinion TabletUI is best suited for this 10.1inch device.
My arguments
- why loosing another 10-12 pixels on the top just displaying the info? now I have an ugly black stripe on the bottom with 3 buttons in the middle
- why moving the hand for pressing the back key instead of using your left finger? on tabletUI this can be done with only one hand, now I have to use 2 hands, one for holding the tablet the other one pressing the keys.
Hoping CM will offer a conf option for switching from phablet to tablet UI thus everyone will be happy. As I remember parandroid already has this.
The question is for NTFS USB mount! How can I make it work ,and have access with file manager?
load the ntfs module (in /system/lib/modules) and mount.
there's various tutorials on the web for it.
your mileage may vary.
I see the theme option in settings, with navigation icons on left, but applying does nothing to the device, other than swap out my wallpaper.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
114At pershoots request, here is the official nightly discussion thread. I will be updating this with information that I find and users posts that are helpful. REMEMBER: THIS IS A WORK IN PROGRESS SO ALWAYS READ THE THREE POST FOR UPDATED INFORMATION
CyanogenMod 10.1 is a free, community built distribution of Android 4.2 (Jelly Bean) which greatly extends the capabilities of your tablet.
New CM Wiki page! http://wiki.cyanogenmod.org/index.php?title=Main_Page
New CM Documention! http://wiki.cyanogenmod.org/index.php?title=Documentation
Usual CM disclaimers:
Code:#include /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
Known Issues (copied from droidbasement):
-A random flicker (it’s faint and fast) can be observed occasionally/infrequently. If this becomes a nuisance to you, you can try to alleviate this by selecting ‘Disable HW overlays’ in Developer Settings. This does not survive a reboot (must be selected on every boot) and impacts swiping motion (it slows it down) in Trebuchet (the Launcher).
-P4*: A 720P recording, when played back, will have artifacts in the upper section of the image. Also when launching the recorded video for the first time, you will encounter a bit of a delay before it launches.
-P4*:If you use the standard GAPPS (from goo), the keyboard will close if typed on for 2 or 3 letters quickly in succession, if you use Google Search, Messaging and/or Gtalk (there could be more). This is a GAPPS library issue. Install a third party keyboard (Swiftkey 3 works ok) and switch to it. This does not affect Browser, System, etc (stock KB works fine there). The GAPPS from wingray don’t appear to exhibit this behavior from brief feedback (make sure your system is cleaned out using the latest recovery (format system), prior to installing the rom and gapps if you had the set from goo installed prior (it has also been reported that data needed to be wiped as well to rid of the residuals)): http://xdaforums.com/showpost.php?p=35825009&postcount=3553
-Wallpaper will be down aligned on the lockscreen.
Things that need work from the community:
Samsung Keyboard Layout
Tell me more
CWM:
Make sure you have the latest (CWM 6.0.3.0)
Download from pershoot website, select your Tab version below:
P7510 (Wifi Only)
http://droidbasement.com/galaxy/roms/cm10.1/p4wifi/
P7500 (3G+Wifi)
http://droidbasement.com/galaxy/roms/cm10.1/p4/
SCH-I905 (Verizon)
http://droidbasement.com/galaxy/rom...//droidbasement.com/galaxy/roms/cm10.1/p4tmo/
Download recovery.tar.md5 and flash with ODIN or Mobile ODIN
Links for ODIN 1.85 : MediaFire
Links for Mobile ODIN by Chainfire Play Store and XDA
Bootloaders: Make sure you update your bootloaders to ICS. People who flashed an ICS custom ROM coming from HoneyComb (3.1) do not have the correct bootloaders.
Download Bootloaders from pershoot site: http://droidbasement.com/galaxy/roms/cm10.1/
Locate your variant and flash with ODIN. *NOTE: MOBILE ODIN DOES NOT FLASH BOOTLOADERS. ONLY ODIN WILL
Bootloader Flashing Instructions: (see image attached to post if unclear)
1) Open ODIN, all settings should be at default, if you change anything, hit reset or make it the same as image attached.
2) Select PDA slot and select the bootloader.tar file.
3) Flash
4) If unclear about the instructions, please ask!
Modems:
Download the recommended modem for your device at droidbasement:
http://droidbasement.com/galaxy/roms/cm10.1/
Install instructions are in post #3
P4 Variants Downloads: (Please see READ ME in post #2 to avoid and confusions or headaches)
P7510 (Wifi Only)
http://get.cm/?device=p4wifi&type=nightly
Changelog: http://mobile.10.1.cmxlog.com/?device=p4wifi
P7500 (3G+Wifi) (You must be on the ICS modem for best results.)
http://get.cm/?device=p4&type=nightly
Changelog:http://mobile.10.1.cmxlog.com/?device=p4
SCH-I905 (Verizon) (You must be on stock ICS (and it’s modem) before flashing to this build, for LTE functionality)
http://get.cm/?device=p4vzw&type=nightly
Changelog:http://mobile.10.1.cmxlog.com/?device=p4vzw
SGH-T859 (T-Mobile)
http://get.cm/?device=p4tmo&type=nightly
Changelog:http://mobile.10.1.cmxlog.com/?device=p4tmo
gapps: (update 01/29/2013)
P75xx gapps: gapps-jb-20130129-P75xx.zip http://www.mediafire.com/?44xhky6dyx4wlw2 Credit to dreamcwli from his thread on Xoom My Android ROM 4.2.1 for original package (Please thank him for the gapps)
Known Issues if using Goo Inside gapps or other gapp packages:
-Hot word detection for Google Now (caused the Google Now crash when starting)
-Gesture typing (causes random crashes when enabled)
-Photosphere (crashing when selecting camera or after aligning shot)
These features are removed in P75xx gapps.
Removed any Google Apps (e.g. Play Music, Sound Search, Calendar, Gmail) that can be downloaded in Play Store: https://play.google.com/store/search?q=Google+Inc.&c=apps
Credits:
pershoot for his hard work
Cyanogen for his amazing ROM
CyanogenMOD Team for their awesome work
Follow CyanogenMOD Team:
Google+
Twitter
PSA from CyanogenMOD about non-NEON future support: https://plus.google.com/u/0/117962666888533781522/posts/8wcuSVkr7zR36Install Instructions: IMPORTANT TO SEE READ ME IN POST #2 It will save you a lot of headaches when upgrading or updating your Tablet.
1) Install the latest CWM (see 1st post for more info)
2) Install ICS bootloaders (1st post) *People who flashed an ICS custom ROM coming from HoneyComb (3.1) do not have the correct bootloaders.
3) Boot into CWM and flash CM10.1 (Please see READ ME in post #2 for more information)
4) Flash gapps-jb-20130120-P75xx.zip (see 1st post for download)
5) Reboot
pershoot has stated before: "best to wipe as some experience lag with multi user." and "if you get any latency/ bizarro behavior, wipe"
F.A.Q
Want Adobe Flash on your Jellybean Tab? (update 05/21/13) New version is (11.1.115.58)
Check out the latest download here: http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html Scroll to Flash Player for Android 4.0 archives and download most current (11.1.115.58). *Note: Flash is not supported in Jelly Bean, no support given in this thread as well.
Need Developer options and Performance tabs?
Go to settings>About tablet and start tapping Build number until it says your a Dev.
I am getting sudden reboots or freezes?
Not all tablets are created equal, if you are experiencing sudden reboots after Overclocking, reset your options back to default.
I am still rebooting or freezing?
Do a full wipe and DO NOT install anything. If the tablet is not rebooting or freezing, install your apps one at a time to isolate the cause. If you are using Titanium Backup, DO NOT RESTORE DATA FOR SYSTEM APPS.
I get Force Closes (FC) when I launch ____ app?
Try clearing data for the application by going Settings>Apps and locate the app and select Clear Data.
How can I increase Launcher performance?
Enable wallpaper hack (Settings> Launcher>Homescreen) and select Wallpaper quick render to boost home UI response (when using a static wallpaper).
Once I am on CM10.1, do I need to continue getting my updates at get.cm?
No, you can update future nightly builds by going to Settings>About tablet>CyanogenMod updates. Once there, change Update types to "New Versions (incl. Nightlies)" *NOTE: Pay attention to the file name, you might occasionally see CM 9 or 10 in the list, DO NOT FLASH!
Can I enable Voice Calling on my tablet?
At this time, the framework has the hook enabled to allow for users to work on the feature. IT IS 100% UNSUPPORTED at this time because it requires you to flash modems which is a deviation from the recommended setup.
I flashed ___ from another___ thread, now ___ this stopped working?
Wipe data and flash CM 10.1 from get.cm, does this issue still happen? If so, post logcat... if not, seek support from the thread you flashed the file from.
I HATE the new layout with the navigation keys in the middle, can I move it?
At this time, the nav keys in the middle is the design. Who knows, CM Team might change this in future builds.
OH NO! Where did my previous CWM backup go?
4.2. changed the file structure on how internal storage is viewed. Data on the internal/fake sdcard will go to 0/ (i.e. /sdcard/0/; /data/media/0/) (both are the same thing).
Since the internal storage is emulated, it is setup now (using file explorer like ES) /mnt/shell/emulated then you will see /0/; /legacy/; /obb/; and /clockworkmod/. Copy clockwordmod folder to your PC and if you need to, flash back to old ROM with old CWM and then move the backup back to /sdcard and then restore.
Using the latest recovery, to find /sdcard while in recovery, you will need to adb to /data/media/. *Note: Make sure to have a copy on your PC, I ran out of space before restoring since it is all in the /data.
Hey! Did you see the easter eggs!!
So not only is there an easter egg when you press the Android version and long press on the jellybean, but if you hit CyanogenMod version, CM planted one too. But did you know that by doing the easter egg and long pressing on the jellybean, you unlock another one! Go to Daydreams under Display in settings and you will see BeanFlinger!
My sound is really low or really high when I am using headphones!
If you are having really low or high volumes while listening with headphones, I recommend Voodoo Sound from Supercurio in the Play Store (Link). This allows you to take control of your volume and change it to your preferences.
I see cm-10.1-xxxxxxxxx-UNOFFICIAL-p4xxxx.zip on Droidbasement, what's the difference between droidbasement builds and nightlies?
The UNOFFICIAL builds on droidbasement are experimental builds compiled by pershoot for testing. It is recommended to flash the nightly builds unless specifically asked to test an unofficial build.32READ ME:
#If using 4.2.2 and want to roll back to 4.2.1 (last build is Feb 13th), you will need to do a full wipe to move backwards or you will bootloop. (update 02/19/13)
#PSA from CyanogenMod team: https://plus.google.com/+CyanogenMod/posts/M2pVM7Y6MTq (update 02/19/13)
ADB Whitelist
As of the Android 4.2.2 update, when you connect your phone to a computer, you are presented with your computer's RSA key fingerprint to open the adb connection. You also have the ability to permanently trust the computer, so you don't have to repeat this step upon every re-connect.
In order for this to work, you must be on the latest SDK which will grant you an updated 'adb' binary.
We will not be introducing any functionality to sidestep this default security, so if you don't update, you will lose the ability to access the device using adb.
# CM 10.1 is based on Android 4.2.1. Any and all proprietary applications that you have installed outside of CM should be updated to their 4.2.1 counterparts. Do not use the 4.1 versions of proprietary applications, else you will experience difficulties.
# Do not use the CyanogenMod Updater to go from 10.0 to 10.1. While you will have a functional rom, due to the 1st bullet point, you will be left without your proprietary applications and their data. We highly suggest performing the initial install manually via recovery (flashing CM and your addons). Once you are on 10.1, you can use the CM Updater as per normal.
# You do not need to wipe when updating to 10.1 if coming from an earlier CM version. However, as we mentioned in the weekend's PSA, users updating (instead of wiping) will experience a conflict in the application data for the Clock app. You are advised to clear this apps data on first boot of 10.1.
# Another item to note is that the support for the 10.0 feature that allowed for an expanded number of targets on the pattern lockscreen is not in 10.1. If you use this lockscreen, disable it before updating from 10.0.
# Finally, we always advise that you create a backup before any update. Do note, however, that due to Android 4.2 changes to support multi-user mode, your backups will automatically be transferred to /sdcard/0/[backup folder]. Remember this when attempting to restore 10.0. Credit to post from CyanogenMOD team (G+ https://plus.google.com/+CyanogenMod/posts/9X561GFMxL5)
Coming from Samsung ICS ROM (custom or not) requires a FULL WIPE (Wipe Data, Cache, and Dalvik Cache) If you do not WIPE you will get a bootloop.
From droidbasement:
GT-P7500 (p4), GT-P7510 (p4wifi), SCH-I905 (p4vzw) and SGH-T859 (p4tmo)
-For P4VZW: You must be on stock ICS (and it’s modem) before flashing to this build, for LTE functionality
-For P4WIFI UK: You must be on the US ICS bootloader (odin .tar.md5 inside the .zip in the folder), otherwise you may incur a rolling screen
-For P4: You must be on the UK ICS bootloader (odin .tar.md5 from AUS inside the folder), otherwise you may incur a rolling screen.
-For P4*: You must be on the ICS modem for best results.
BEFORE REPORTING ANY BUGS, PLEASE DO A FULL WIPE AND FLASH AGAIN TO VERIFY THE BUG! ALSO, NOTHING WILL GET FIXED WITHOUT A LOGCAT (we cannot debug xda posts, need a logcat)
Getting a logcat:
1) Make sure ADB is installed (http://developer.android.com/sdk/index.html)
2) Open Command Prompt
3) adb logcat -d > logcat.txt
4) Locate the logcat and upload to xda20all, im working on bringing in a new wifi driver which should solve numerous issues and add some more functionality.
just need to solve one last issue with it (speed is capped when using it on this device).
once that is sorted (if can be done in a timely manner), then ill put out tests for all devices to ensure it works well in various scenarios.
