CM10 "Jelly Bean" 0.08.3

Search This thread
By:
Advanced…
K

Keithn

Senior Member
Feb 24, 2011
859
242
Google Pixel 6 Pro
Seems smoother than I last remember when using CM10, brightness control does work. Youtube doesn't seem to want to load HD and Netflix doesn't play video. Not sure about battery yet. Just black screened on me so that's still an issue, I'll try to get adb setup on this pc again.
 
M

meghd00t

Senior Member
Jul 13, 2011
111
141
Bangalore
chrmhoffmann said:
Hi,

brightness should work. battery drain needs your testing :)

Chris
Click to expand...
Click to collapse

Excellent work!

2 screen shots attached showing ducati doing hw decode in MX player and Youtube.
brightness adjustment works fine

Some observations.

I just ran a build of this with SGT7 and noted the following "issues"

please remove prebuilt su. Superuser is v 3.2 and your su is v 3.1.1 and the build actually generates the correct binary which will work

these are the changes I made to make recovery work - http://pastebin.com/srZtrXiV all cribbed from Hashcode!

I changed kernel config CONFIG_CPU_FREQ_GOV_INTERACTIVE=y to CONFIG_CPU_FREQ_GOV_INTERACTIVE=n other wise in recovery dmesg is filled with errors about hung task kinteractived

I added CONFIG_IP_NF_RAW=y CONFIG_IP6_NF_RAW=y since logcat shows this error without
E/BandwidthController( 107): runIptablesCmd(): failed /system/bin/iptables -t raw -A bw_raw_PREROUTING ! -i lo+ -m owner --socket-exists res=768

another minor irritation - in timezone setup usually after PST +5:00 we have IST +5:30 and Nepal +5:45 then the +6:00 zone but now the +530 and +5:45 zones come after the +6:00 zone - but probably this is a cm bug not a acclaim bug

I have installed cpuspy and put it on the charger and am off to sleep will tinker some more later!
 

Attachments

  • Screenshot_2012-09-01-21-30-27.jpg
    Screenshot_2012-09-01-21-30-27.jpg
    22.1 KB · Views: 403
  • Screenshot_2012-09-01-21-40-00.jpg
    Screenshot_2012-09-01-21-40-00.jpg
    27.9 KB · Views: 409
  • Like
Reactions: billy8362, daedricgeek, verbalshadow and 7 others
T

tonyp23

Senior Member
Jun 2, 2010
104
92
Keithn said:
Seems smoother than I last remember when using CM10, brightness control does work. Youtube doesn't seem to want to load HD and Netflix doesn't play video. Not sure about battery yet. Just black screened on me so that's still an issue, I'll try to get adb setup on this pc again.
Click to expand...
Click to collapse
You Tube is working for me in HD and Netflix working as well. MLB At Bat live video working too. Are you on 512MB or 1GB?
 
Last edited:
S

ShinnAsuka

Senior Member
Dec 9, 2011
735
146
Wow awesome job with this rom. Confirming that ducati works with HW decoding on both mx player and youtube.

One main problem, superuser doesn't seem to remember allowing apps to access superuser rights. Not sure if that is a known issue. Otherwise this rom is great!
 
C

chrmhoffmann

Inactive Recognized Developer
Nov 11, 2006
1,007
3,203
You can go to Superuser and update su binary. That seems to make this problem go away?

Chris
 
T

tonyp23

Senior Member
Jun 2, 2010
104
92
More testing:
Hulu + from here is working:
http://xdaforums.com/showthread.php?t=1449110

Also, the MLB At Bat live that I tested does not display in HD, it does in CM7 and so does my phone. I've attached logcat from mlb. I think it is in this section:
Code: 
E/OMXNodeInstance(  113): OMX_GetExtensionIndex failed
I/SoftAAC2(  113): Reconfiguring decoder: 48000 Hz, 1 channels
I/BufferQueue(  110): setBufferCount: count=5
D/AudioResampler(  113): forcing AudioResampler quality to 3
I/BufferQueue(  110): setBufferCount: count=9
W/        (  113): Warning message AMessage(what = 'omx ', target = 22) = {
W/        (  113):   int32_t type = 0
W/        (  113):   void *node = 0xc
W/        (  113):   int32_t event = 3
W/        (  113):   int32_t data1 = 1
W/        (  113):   int32_t data2 = 117440527
W/        (  113): } unhandled in root state.
 

Attachments

  • mlb_epic.txt
    178.2 KB · Views: 7
  • mlb_nook.txt
    312.5 KB · Views: 7
C

C64assembly

Senior Member
Feb 6, 2012
190
82
chrmhoffmann said:
Removed. Thanks!

Chris
Click to expand...
Click to collapse

Glad to see HW composition working properly with backlight. Still have a couple of bugs to iron out like Mic, location awareness and the random black screen. I have also had a SOD issue so I don't know if deep sleep needs tweaked. GREAT, GREAT progress at the kernel level and on this ROM! Thank you Team A!
 
K

Keithn

Senior Member
Feb 24, 2011
859
242
Google Pixel 6 Pro
chrmhoffmann said:
So you are on 512M nook and youtube doesnt work. Can you please collect a dmesg and logcat output and post it here?

Rgds,
Chris
Click to expand...
Click to collapse

dmesg

logcat

Had to get adb working on this pc, should be good to get logs now.

D/DOMX ( 113): hardware/ti/domx/domx/omx_rpc/src/omx_rpc.c:140 RPC_InstanceInit()
D/DOMX ( 113): ERROR: Can't open device, errorno from open = 2
D/DOMX ( 113): hardware/ti/domx/domx/omx_rpc/src/omx_rpc_stub.c:204 RPC_GetHandle()
D/DOMX ( 113): ERROR: Write failed returning status = 0xffffffff
D/DOMX ( 113): hardware/ti/domx/domx/omx_rpc/src/omx_rpc_stub.c:204 RPC_GetHandle()
D/DOMX ( 113): ERROR: failed check:0 - returning error: 0x81001 - Write failed
D/DOMX ( 113): hardware/ti/domx/domx/omx_proxy_common/src/omx_proxy_common.c:2262 OMX_ProxyCommonInit()
D/DOMX ( 113): ERROR: RPC function returned error 0x81001
D/DOMX ( 113): hardware/ti/domx/domx/omx_proxy_common/src/omx_proxy_common.c:2262 OMX_ProxyCommonInit()
D/DOMX ( 113): ERROR: failed check:(eError == OMX_ErrorNone) - returning error: 0x80001001 - Error returned from OMX
API in ducati
D/DOMX ( 113): hardware/ti/domx/domx/omx_rpc/src/omx_rpc.c:261 RPC_InstanceDeInit()
D/DOMX ( 113): ERROR: Close failed on omx fd
D/DOMX ( 113): hardware/ti/domx/omx_proxy_component/omx_video_dec/src/omx_proxy_videodec.c:227 OMX_ProxyViddecInit(
)
D/DOMX ( 113): ERROR: failed check:eError == OMX_ErrorNone - returning error: 0x80001001 - Proxy common init returne
d error
E/OMXCodec( 113): failed to allocate node OMX.TI.DUCATI1.VIDEO.DECODER
I/OMXCodec( 113): [OMX.google.h264.decoder] AVC profile = 100 (High), level = 31
I/OMXCodec( 113): [OMX.google.h264.decoder] video dimensions are 320 x 240
I/OMXCodec( 113): [OMX.google.h264.decoder] Crop rect is 320 x 240 @ (0, 0)
D/wpa_supplicant( 403): wpa_s 0x41f35630 cmd SIGNAL_POLL
D/wpa_supplicant( 403): RX ctrl_iface - hexdump(len=11): 53 49 47 4e 41 4c 5f 50 4f 4c 4c
D/wpa_supplicant( 403): ctrl_iface: SIGNAL_POLL
D/wpa_supplicant( 403): nl80211: survey data missing!
E/SoftAVC ( 113): Decoder failed: -2
E/OMXCodec( 113): [OMX.google.h264.decoder] ERROR(0x80001001, -1007)
I/SoftAAC2( 113): Reconfiguring decoder: 44100 Hz, 2 channels
E/MediaPlayer( 1451): error (1, -2147483648)
E/MediaPlayer( 1451): Error (1,-2147483648)
Click to expand...
Click to collapse

After a quick glance I saw this
 
Last edited:
  • Like
Reactions: tmjohnsonfse, Nark.GA60 and Rebellos
R

Rebellos

Senior Recognized Developer
May 13, 2009
1,353
3,428
Gdańsk
Keithn said:
dmesg

logcat

Had to get adb working on this pc, should be good to get logs now.



After a quick glance I saw this
Click to expand...
Click to collapse

Thanks
2 more requests:
1) Could you catch dmesg straight after bootup?
2) Could you catch
cat /sys/kernel/debug/remoteproc/omap-rproc.1/trace0
cat /sys/kernel/debug/remoteproc/omap-rproc.1/trace1
Click to expand...
Click to collapse
a) right after bootup
b) after trying to play HD movie

Thanks in advance.
 
  • Like
Reactions: billy8362 and slgooding
R

Rebellos

Senior Recognized Developer
May 13, 2009
1,353
3,428
Gdańsk
meghd00t said:
Excellent work!

2 screen shots attached showing ducati doing hw decode in MX player and Youtube.
brightness adjustment works fine

Some observations.

I just ran a build of this with SGT7 and noted the following "issues"

please remove prebuilt su. Superuser is v 3.2 and your su is v 3.1.1 and the build actually generates the correct binary which will work

these are the changes I made to make recovery work - http://pastebin.com/srZtrXiV all cribbed from Hashcode!

I changed kernel config CONFIG_CPU_FREQ_GOV_INTERACTIVE=y to CONFIG_CPU_FREQ_GOV_INTERACTIVE=n other wise in recovery dmesg is filled with errors about hung task kinteractived

I added CONFIG_IP_NF_RAW=y CONFIG_IP6_NF_RAW=y since logcat shows this error without
E/BandwidthController( 107): runIptablesCmd(): failed /system/bin/iptables -t raw -A bw_raw_PREROUTING ! -i lo+ -m owner --socket-exists res=768

another minor irritation - in timezone setup usually after PST +5:00 we have IST +5:30 and Nepal +5:45 then the +6:00 zone but now the +530 and +5:45 zones come after the +6:00 zone - but probably this is a cm bug not a acclaim bug

I have installed cpuspy and put it on the charger and am off to sleep will tinker some more later!
Click to expand...
Click to collapse

Thanks.
Merged most of your changes in, or fixed it other way.
 
  • Like
Reactions: billy8362, mogrith, nook_lover and 4 others
billy8362

billy8362

Senior Member
Dec 26, 2011
449
50
OS seems to be still eating up the battery.

Sent from my Barnes & Noble Nook Tablet using xda app-developers app
 
You must log in or register to reply here.

Similar threads

C
[DEV] [ROM] CM9 for Nook Tablet Alpha 0.06
Replies
846
Views
456K
Drebin 894
Drebin 894
CelticWebSolutions
[ROM] CM7 8GB &16GB Compatible Beta for the Nook Tablet.., Updated 7th July to Beta
Replies
1K
Views
643K
nmyshkin
nmyshkin
Demetris
[ROM] SGT7+CM10+Cherry Picks,By meghd00t. New 09/12 Multitouched!
Replies
778
Views
243K
ProCision
ProCision
I
[Blocks OTA's!] Full root for Nook Tablet. [11/20/11] [Permanent root!]
Replies
975
Views
836K
Modded Darts
Modded Darts
K
[KERNEL][3.0.21+][HD video working now on 16Gb NT] Nook Tablet ICS kernel development
Replies
843
Views
343K
C
chrmhoffmann

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 132
    C
    chrmhoffmann
    CM10 "Jelly Bean" for
    Nook Tablet
    Alpha 0.08.3 Release
    “Seriously, Don’t Try To Sell This... You’ll Really, REALLY Regret It” Edition​

    Hey all,

    So once again it’s time. Introducing the first alpha development preview of CyanogenMod 10 (based on Jelly bean) for the BN Nook Tablet, aka codename: “acclaim”. This preview for the internal “emmc” storage is intended only for developers as it is in a very early development stage and not all features of the device are fully working.

    Let’s emphasize that-- THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT’S TO COME. AND SOME THINGS DON’T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.

    Also...

    If you have troubles and post to this form, please indicate if you use 16GB (1GB RAM) or 8GB (512 MB RAM) model.

    WHAT WORKS
    3.0 kernel (mostly works, thx to Kuzma)
    display
    touchscreen
    new “CyanoBoot” menu bootloader (thanks to rebellos for most recent enhancements)
    accelerometer
    data statistics
    additional kernel tweaks/improvements/history
    bootcount/battery updates & other acclaim peculiarities addressed
    sound
    video acceleration
    hwcomposition
    microphone (does it still crash kernel?)

    WHAT DOESN’T WORK
    - crashes (random reboots - less frequent though)
    - battery drain (got also somewhat better)

    SUPPORT

    You get none. Zero. Zip. We obligate ourselves to providing nothing further. You are on your own and will have to help each other via this thread. This is provided “as-is”, and if you don’t like it... there is always stock and CM7.

    We basically lack time to give full dedication to this rom, and we’re looking for skilled devs who know the OMAP4 platform, Android, and/or other things that might be relevant.

    Please join us on IRC: some people are on #nook-tablet (freenode).


    BUG REPORTS

    This is the format for a bug report: “XXXXX isn’t working. Here is how to fix it: [INCLUDE SOLUTION]” Don’t have source? Too bad. You’ll have to wait then.

    If you report bugs, please don’t be disappointed if we can’t fix them immediately (or even never). It’s not because we don’t care, but because we don’t have time or don’t know how to fix it.

    NOTE: DEVELOPERS WANTED. Please contact us if you are a developer with something to contribute.


    INSTALLATION:
    Prepare a “bootable” clockworkmod (CWM) recovery SD. There are instructions for doing this in other threads on XDA.
    Download a recovery.img (e.g. from CM9) and the update.zip files at the end of this post to your computer from the link below.
    Boot into a recovery SD for acclaim and use it to install the update.zip file. Warning: It should overwrite the contents of your emmc, including the stock installation or other operating systems.
    From ClockworkMod. perform CWM wipe data and cache (or “restore factory settings”) to clear previous content from those partitions. Again, you will be erasing anything you had on those partitions.
    Remove the SD card and select the reboot option. You should now boot into CM10.

    At this point, Fattire’s CyanoBoot bootloader can be used to flash recovery.img to the internal mmc.

    To install CWM to emmc, download the recovery.img file from CM9 thread and do the following:
    Download and install fastboot for your computer’s operating system.
    Boot the device and hold the “n” key to get into the cyanoboot menu
    From the menu, choose “Enable Fastboot”
    On your computer, run: fastboot flash recovery recovery.img.

    EMMC? IS THERE AN SD VERSION?

    Of course it won’t be hard to do, but don’t look for an SD bootable version from us any time soon. EMMC is our thing, dig?


    RETURNING TO STOCK (THEORETICAL-- THIS MAY NOT WORK)

    If you have installed above rom and the CWM recovery and you really hate it and want to go back to stock, you may wish to try to flash the original acclaim_update.zip from BN. You have to unzip that file and edit META-INF/com/google/android/updater-script. Drop the first two lines here:

    assert(getprop("ro.product.device") == "blaze" ||
    getprop("ro.build.product") == "blaze");

    Zip the package again. Then go to CWM, flash the zip, wipe, and reboot.

    THANKS TO...

    chrmhoffmann, hashcode, kuzma, fattire, rebellos, mik_os, nemith, Texas Instruments, BN, and so many others, especially those who helped test cyanoboot.

    A special shout out to Bauwks is also in order, who defeated the malevelant locked bootloader with some serious geniusness.

    0.08.3:

    Changelog:- latest kernel (should roll back the reboot issues). Thanks to kuzma30- CM upstream sync
    The files:

    cm10-acclaim-0.08.3-full-of-bugs.zip
    recovery-0.08.3.img

    md5sums:c5fe2a891f3636838da5c1c3a0790cde cm10-acclaim-0.08.3-full-of-bugs.zip554647479d592411779f342d6977e709 recovery-0.08.3.img

    -----------------
    Older releases:

    0.08.2:
    - attempt to fix reboot issues differently (cpuidle44xx sync with omap TI kernel and workaround by mik_os/kuzma30. Should maybe also result in a better battery life. Please observe. Thx to both!)
    - other kernel fixes: emif from nook hd, IPU deep idle, io tweaks, new governors, etc (thx to mik_os, kuzma30, hashcode). For full kernel change list, please look at kernel source here: https://github.com/Kuzma30/kernel3NookTablet/commits/jellybean.
    - cm10 upstream sync

    The Files:
    cm10-acclaim-0.08.2-full-of-bugs.zip
    recovery-0.08.2.img

    MD5:
    aad0ea1525702f6ed4a8071114daf1ec cm10-acclaim-0.08.2-full-of-bugs.zip
    e3cea44fe918560d4780e9e739349227 recovery-0.08.2.img

    0.08.1:
    - touchscreen driver kernel fix (thanks to mik_os, see here)
    - fix reboot into recovery (you also need to flash recovery.img to make this work: fastboot flash recovery /path/to/recovery-0.08.1.img)
    - CM10 upstream sync

    The Files:
    cm10-acclaim-0.08.1-full-of-bugs.zip
    recovery-0.08.1.img
    MD5:
    d00c14c2fc18c3afcd176defef8c2002 recovery-0.08.1.img
    4d724adaf878490b8a068d8c4339e2cc cm10-acclaim-0.08.1-full-of-bugs.zip

    0.08:
    - touchscreen firmware updater app (many, many thanks to mik_os). Handle with care! If you flash back to stock or other roms, remember to flash touch firmware to stock first!)
    - kernel updates (mainly drivers taken from Nook HD: many thanks to mik_os, kuzma.)
    - cm10 upstream sync

    The Files:
    cm10-acclaim-0.08-full-of-bugs.zip
    recovery-0.08.img
    MD5:
    5ec4e09e5050d6f75d625674e953b406 cm10-acclaim-0.08-full-of-bugs.zip
    868f73098207dab46a5c39f93341e92b recovery-0.08.img

    0.07.1
    Changelog:
    - pvr graphics driver update (IMG DDK 1.9@2166536)
    - minor kernel changes (check history and contributors at https://github.com/Kuzma30/kernel3NookTablet/commits/jellybean)
    - cm10 upstream sync

    The Files:
    cm10-acclaim-0.07.1-full-of-bugs.zip
    recovery-0.07.1.img
    MD5:
    dcb0e1b4e980f31ca2fceb105727a9ef cm10-acclaim-0.07.1-full-of-bugs.zip
    495f89ac4719af8066ddd21369037c47 recovery-0.07.1.img

    0.07
    Changelog:
    - new touchpad driver: a huge thanks to mik_os! This rom and kernel works with newer fw found in other threads here - I personally haven't tried it though. Please beware that upgrading touch firmware might make it impossible to return to stock BN roms. The new driver also fixes issues previously seen in some games (temple run, etc)
    - microphone xml config files: does it still crash the kernel?
    - cm 10 upstream fixes

    The Files:
    cm10-acclaim-0.07-full-of-bugs.zip
    MD5:
    ee2e43591272818a2d9bd65507f580d4 cm10-acclaim-0.07-full-of-bugs.zip

    0.06.1

    Changelog:
    - slightly better screen init (less white flashes on suspend/resume and full bootanim). Not perfect yet, though.
    - CM10 upstream sync

    The Files:
    cm10-acclaim-0.06.1-full-of-bugs.zip
    MD5:
    5f2411fcf4e72105cc9badef89cb922b cm10-acclaim-0.06.1-full-of-bugs.zip

    0.06 (starts to incorporate Android 4.1.2 changes)
    Changelog:
    - wifi (potential compatibility fixes as described here: https://github.com/loosethisskin/an...mmit/59edc9b57f63d92c228142a026b6ff1ceb6eca8b. Thx to meghd00t.)
    - upstream sync with cyanogenmod (4.1.2 as of 10-10-2012)

    The Files:
    cm10-acclaim-0.06-full-of-bugs.zip
    MD5:
    2025d35034c50ea8f93413347365aca3 cm10-acclaim-0.06-full-of-bugs.zip

    0.05.3
    Changelog:
    - enable smartreflex (voltage calibration - does this save some power?)
    - update SGX
    - JellyBean power HAL (thx to Hashcode)
    - sync with CM10
    - new attempt to fix reboot (cpuidle code from SGSII - device should go into deep sleep again, but reboots ... are they fixed? Guess not.)

    The Files:
    cm10-acclaim-0.05.3-full-of-bugs.zip
    MD5:
    4ca4fb6f224237db8af19d78b19fc05f cm10-acclaim-0.05.3-full-of-bugs.zip

    0.05.2
    Changelog:
    - attempt to work around random reboots
    (this seems to break proper "deep sleep" as it seems CPU_IDLE related)
    - disable a (hopefully) unused regulator (VUSIM)
    - dont make the display flash white on startup
    - cyanogenmod upstream sync

    The Files:
    cm10-acclaim-0.05.2-full-of-bugs.zip

    MD5:
    c5835e6da0aff502ded12187d050c621 cm10-acclaim-0.05.2-full-of-bugs.zip


    0.05.1:
    Changelog:
    - new attempt for 512MB devices for hw video decoding (aka ducati) - thanks to diimka, rebellos.
    - less noisy dmesg
    - newer su and persistent settings - thanks to meghd00t.
    - recovery - thanks to meghd00t, ajayramaswamy.
    - IP_NF_RAW - thanks to meghd00t.
    - cm10 upstream sync - thanks to the CM folks :)

    The Files:
    cm10-acclaim-0.05.1-full-of-bugs.zip
    recovery-0.05.1.img

    MD5:
    ff8254c2fc19f23d02d31cb9eaff0bdf cm10-acclaim-0.05.1-full-of-bugs.zip
    0694405ebc452fde673d7e05d1467a5d recovery-0.05.1.img

    Thanks as usual: hashcode, rebellos and kuzma30 (they do an __incredible__ job)

    0.05:
    - updated sgx, wifi
    - video hw decoding (aka ducati). Incredible work from: rebellos, ntemis, hashcode, TI (esp. from diimka) and many others. Please report back if it works also on 512MB devices.
    - hwcomposition. Incredible work from hashcode.
    - cm10 upstream sync

    The Files:
    cm10-acclaim-0.05-full-of-bugs.zip

    (recovery is still broken, so please use older ones or use one from the CM9 thread).

    MD5:
    2850631a56c6c617c5c917e9515fbfb7 cm10-acclaim-0.05-full-of-bugs.zip

    0.04.2:
    Changelog:
    - updated wifi driver
    - cm10 synced with upstream

    The Files:
    cm10-acclaim-0.04.2-full-of-bugs.zip

    (recovery is still broken, so please use older ones or use one from the CM9 thread).

    MD5:
    5d87970c76c4971a14087b6374c9d4c6 cm10-acclaim-0.04.2-full-of-bugs.zip

    0.04.1:
    Changelog (aka "fixed"):
    - updated SGX driver
    - update kernel trying to avoid crashes (thx to rebellos, hashcode), but not successful (random reboots remain)
    - sdcard issues after suspend fixed
    - USB mount both internal and sdcard (thx to pawitp)
    - should also consume less power and sleep deeper
    - re-enabled brightness driver
    - CM10 upstream changes

    The Files:
    cm10-acclaim-0.04.1-full-of-bugs.zip
    Recovery 0.04.1 removed as it doesn't work (use recovery-0.03.img instead)

    MD5:
    9335459d3bd3fe56e934b67a90f88039 recovery-0.04.1.img

    0.03:
    Changelog (aka "fixed"):
    - updated wifi and SGX driver
    - update kernel trying to avoid crashes (thx to rebellos changes), but not really successful (random reboots seem to remain).
    - CM10 upstream changes
    - recovery img added
    - cyanoboot updates for fastboot improvements

    The Files:
    cm10-acclaim-0.03-full-of-bugs.zip
    recovery-0.03.img

    MD5:
    5f43b92b836b90df2bc5d9bd1e4bc969 recovery.img
    f89e19f31ac6f6f11b3fc6fe53475ca1 cm10-acclaim-0.03-full-of-bugs.zip


    0.02:
    Changelog (aka "fixed"):
    - sound / mic (but mic seems to crash kernel)
    - su binary missing (thx hashcode)
    - rotation animation (see http://review.cyanogenmod.com/#/c/19182/)
    - some typos in cyanoboot (thx fattire/rebellos)
    - usb mass storage is default (mtp works also), but only sdcard (not emmc shows up)
    - chrome did not show up in market

    The Files:
    cm10-acclaim-0.02-full-of-bugs.zip
    MD5:
    5514a0eb67985975748444b0c17934b1 cm10-acclaim-0.02-full-of-bugs.zip

    Older releases:

    0.01:
    The Files:
    cm10-acclaim-0.01-full-of-bugs.zip
    MD5:
    95c3eac13d133feb1ebcf62817d6d866 cm10-acclaim-0.01-full-of-bugs.zip
    View
    79
    C
    chrmhoffmann
    new version...

    Hi all,

    new version released. Please grab it... And click Thanks! I still haven't reached 1k thx :)

    Rgds,
    Chris
    View
    29
    C
    chrmhoffmann
    old_fart said:
    Chris,
    First and foremost, 'thank you ! ! ! ' for all your hard work. I read today there is a new base, 4.1.2 out and already being used. It supposed to have new features and bug fixes. Just a fyi . . .
    Click to expand...
    Click to collapse

    Hi,

    0.06 is synced with todays CM10 that should AFAIK have 4.1.2 changes. At least version number has bumped up. Enjoy.

    Rgds,
    Chris
    View
    25
    C
    chrmhoffmann
    The problem is that we don't have an original 3.0 kernel nor do we have schematics of the board. Kuzma30 made very good initial progress on kernel, Rebellos, mikos, Hashcode and myself found and corrected some issues, but...

    If I might add that we don't seem to be omap hw experts, so please help if you're knowledgeable .....

    The kernel has some issues, but we don't know how to resolve them. Other than that the device works kind of OK (reasonably fast, etc) I think.

    Outstanding issues:
    - random reboots (main issue: we don't know reason, CPU_IDLE switch off made it better for me, but some users still seem to have problems. Please provide more feedback :) )
    - power management (main issue: no board schematics, lack of omap knowledge :) )
    - microphone ( I know about XML file, but using it makes kernel crash also)
    - some games don't respond to touchscreen fast enough ? (not sure if this is kernel or hal or other user space problem)

    Chris

    Forgot to mention, that we're all part-timers. This eats lots of weekends already :)

    Sent from my Barnes & Noble Nook Tablet using xda app-developers app
    View
    22
    C
    chrmhoffmann
    0.08.3

    Hi,

    i made above release to the usual place but I have not tested it yet as I am currently on 10.1. Please try it out.

    Changelog:
    - latest kernel (should roll back the reboot issues). Thanks to kuzma30
    - CM upstream sync

    Downloads:
    http://goo.im/devs/chrmhoffmann/cm10/

    md5sums:
    c5fe2a891f3636838da5c1c3a0790cde cm10-acclaim-0.08.3-full-of-bugs.zip
    554647479d592411779f342d6977e709 recovery-0.08.3.img

    I don't think that I will do another 10.0 release as the 10.1 from kuzma30 is very good and usable.

    Have a good christmas and new year or whatever you celebrate.

    Rgds,
    Chris
    View

New posts