Emergency mode LG P500

Search This thread

goran9888

Senior Member
Jul 5, 2010
75
5
After flashing baseband, second time today, my phone go to emergency mode during flashing and after half hour and more nothing happend. Now, phone is always in emergency mode, and nothing i can to do. Backup i have, but LGMDP-v1.5 dont recognize phone and i dont can go to recovery mode. And KDZ Updater dont see phone.



Does for this phone has hope?



p.s. Sorry for my bad english.
 

ayazm.140895

Senior Member
Sep 15, 2011
533
57
Bangalore
Just don't mess with it now!! Just take it to service center they'll fix it!! If u try repairing it on ur now brick it totally!!! Just don't mess with it just take to service center!!!!! :)

Sent from my LG-P500 using xda app-developers app
 
  • Like
Reactions: MOHSEN GSM
T

TheAndroidGeek

Guest
You can remove the battery IF YOU WERE FLASHING BASEBAND ONLY
then put battery back and press vol up + back + power and phone will go in emergency mode
disable all lg modems in device manager, then flash baseband again and it will work
 

goran9888

Senior Member
Jul 5, 2010
75
5
I remove battery ~10 times, and phone always automatticly go in emergency mode when i back up battery, but device is not recognize by tool like a LGMDP-v1.5, lg studio kdz updater on computer.
 
T

TheAndroidGeek

Guest
1. remove battery
2. put battery back
3. press power button+ volume up button + back button together
4. keep buttons pressed and phone will go in emergency mode
5. now lgmdp will recognize device
 

goran9888

Senior Member
Jul 5, 2010
75
5
@TheAndroidGeek


I do what you write to me, and lgmdp recongnize the phone but when i click connect button lgmdp is notifier with message 'Error! can't open serial port (rebot and reconnect).'

What next?
 

goran9888

Senior Member
Jul 5, 2010
75
5
In Device Manager is disabled only LGE Virtual Modem because he is only there. But error is still there in lgmdp.
 

goran9888

Senior Member
Jul 5, 2010
75
5
Hooo ...


I back phone in life with this tutorial: http://xdaforums.com/showthread.php?t=1197111


Thanks to xzet2 for that tutorial.




Now, i installed this ROM: http://xdaforums.com/showthread.php?t=1818219
But i dont have service again (no signal - baseband is unknown). With android 2.2.2. is all ok (have service, baseband v10e is show and all work ok) but i want ics.

I trie to flash baseband to P500-v20G but lgmdp dont see phone when this ics rom installed. When installed android 2.2.2 lgmdp see phone.

In Device manager LGE Virtual Modem is disabled.

What to do?

Does ok to install ROM with android 2.2.2 and then flash baseband on v20g version and then install ics, or what?
 

goran9888

Senior Member
Jul 5, 2010
75
5
And again hoooo ...



I start phone in emergency mode, run lgmdp and flash baseband. That all work 10 seconds, and wala ... now i have new baseband and ics rom.


Thanks!
 

ra$h

Member
Jan 13, 2013
33
4
Emergency mode and only lg logo

Hi,
MY lg p500 suddenly stopped working. upon switching on it only shows LG logo... tried hard set button. but nothing worked. searched on google, find kdz, lgmdp, android adb ( fastboot mode) , LG Utils....i tried all the option but nothing seems to work....

i realised that my micro-sd got corrupted causing this problem then i changed my card and again tried but finding same situation.

1.=when i detach my usb and remove battery and again putting battery and pressing combination of " RETURN + VOL UP + POWER" my phone goes into EMERGENCY MODE.

2. when i put usb cable, its just shows lg logo, nothing else. on pressing HOME BUTTON , it shows
" FASTBOOT MODE STARTED
UDC_STARTED()
-- SUSPEND--
--RESET--
--PORTCHANGE--
--RESET--
--PORTCHANGE--




is there any hope to bring it into life ?????

Please help me

p.s :
1. KDZ UPDATE : I TRIED V20D.00.KDZ FILE . it show " upgrade error error code =6" .
( tried all three mode " DIAG, EMERGENCY, CS_EMERGENCY) but got same error for all the mode option.
2. lgmdp : upon connecting doesnt shows any thing in NV backup .
3. Android adb : on doing "fastboot erase recovery" it just keep on showing " waiting for device"....
4. LG utils : on selecting "I" option ( for extracting kdz ) the LG utils carshes.


is there any hope for my phone ????
 

Stantech

New member
Mar 2, 2019
1
0
I went to update my lg p-500h and it went into emergency mode anyway I can get my phone back up again
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Just don't mess with it now!! Just take it to service center they'll fix it!! If u try repairing it on ur now brick it totally!!! Just don't mess with it just take to service center!!!!! :)

    Sent from my LG-P500 using xda app-developers app