Must wipe with ota 20110524 firmware
Did you follow steps from 1st page?
What device you have?
Are you have malata ?
Beacause 512 devices flash succesfully this rom
yes, I wipe with ota 20110524 firmware, then flash cwm (latest) in swapping .bat & .sh files as said in my previous posts.
Wipe cache+data+Dalvik+ battery+ format emmc+format sdcard
Yes, I have malata 3G, 16gb nand, 512mb ram, mcc smba_9701 (not evolia), bought from Hotmid.
Pimpup is working good, but I tried 3 times flashing ROM[AOKP]jb_4.1.2_G-PACK_Malata_smba9701mcc and it stucks on boot (seems looping) for 20 minutes and so. I see the boot logo with colors moving as intended, but it cannot boot properly.
I swapped .bat & .sh files in nvflash because I have seen differences in memory allocation in nvflash config files between ROM[AOKP]jb_4.1.2_G-PACK_Malata_smba9701mcc (cannot even flash CWM) and AOSP 4.0.4 ics rom for malata t8 (can flash CWM and Rom).
Thank you very much for your help!!! If you need other informations, let me know. Tomorrow, I will try another time, starting from the beginning.
You said that "2-CWM format Factory reset and wipe data(twice for sure)" in your first post: can you give detailed informations about this process? Is it the wipe in factory mode found in ICS menu? or is it something different?
Thanks again!
---------- Post added at 11:23 PM ---------- Previous post was at 11:18 PM ----------
I put these files from nvflash supplied with AOSP 4.0.4 ics rom for malata t8 in nvflash_cwm6.0.1.5 from ROM[AOKP]jb_4.1.2_G-PACK_Malata_smba9701mcc
device.1GB.bct
device.512MB.bct
device.emmc.16GB.512M.cfg
device.emmc.16GB.cfg
download.1GB.bat
download.1GB.sh
download.512MB.bat
download.512MB.sh
I flashed with nvflash using 512MB files.
all others files remains the one you gave for CWM 6.0.1.5