[UTIL] | X10Flash GUI & 2.1 Firmware (added docomo multitouch)

Search This thread
By:
Advanced…
R

rbk1016

Member
Jan 18, 2011
22
0
Please help!

Hello all! VERY new to Sony Ericsson, as well as Android. I downloaded the Flash Tool and the correct x10a ROM (2.1 x10a WORLD generic). After running the initially downloaded Flash Tool application, it becomes a folder, perfect. However, when I explore the Flash Tool folder, there are multiple files inside also in the.rar format. Do I have to extract these files as well before proceeding? I know that I must extract my ROM into the firmware folder and have done so, there are 10 .sin files within a folder inside there.

So without extracting anything other than the ROM into the firmware folder within the Flash Tool folder, I attempted to run "x10FlashTool" application within the Flash Tool Folder and it gives this error:

"No JVM could be found on your system.
Please define EXE4J_JAVA_HOME
to point to an installed 32-bit JDK or JRE or download a JRE from (the java website(sic))."

Anyone have any idea what I'm doing wrong here? Is it because I'm attempting to perform the flash on my Mac Air using Parallels 4.0 (Windows XP Pro, 32-bit)? I really hope not otherwise I will never be able to own anything Android (fully Mac household)!!!

Thanks in advance for any and ALL advice in regards to this issue! I really wanted to give Android a shot and hope not to be disappointed!

Rob

**EDIT**

Just did a bit of research and the error has something to do with the "java virtual machine" ... faaak! I think I'm screwed!!
 
Last edited:
david_kurtovic

david_kurtovic

Senior Member
Jul 2, 2010
70
8
Trofaiach
SUCCESSFULLY INSTALLED THE DUALTOUTCH UPDATE ON MY x10i

Hello guys :D

I just installed the update on my x10i

I discovered that the "userdata.sin" is missing from the FW what caused the Boot Loop

I attached the file....

Download it and extract it to the FW Folder where the rest of the Update files is (kernel.sin system.sin etc...) then flash it again... and it should work for all of you!! :D

David
 

Attachments

  • userdata.rar
    13.8 KB · Views: 15,470
  • Like
Reactions: Dusza Spc and rabetionline
Y

ybc143

New member
Oct 2, 2010
2
0
Kuala Lumpur
i flash to docomo, but my phone now stuck at docomo screen and then it auto restart again... what's the problem???

big thanks to david
 
Last edited:
X

xlen1

New member
Jan 21, 2011
1
0
Will this work with X10a from AT&T? Thanks!!

Bin4ry, will this work with X10a on AT&T network? Thank you!!
 
T

tryantar

Senior Member
Jan 1, 2011
213
77
just inquiring...
im using an x10i
is it possible to flash the docomo multitouch rom into my x10i? would there be any complications?
 
M

Misleadingg

Member
Nov 27, 2010
19
2
Ummm you should really mention that there is no need for installing JIT. I tried it and broken the whole rom.
Really impressive rom though
 
starman1695

starman1695

Member
Jan 1, 2011
19
0
Fort Lauderdale
Bin4ry said:
Okay guys.
Here is new X10flash for Firmware 2.1 Version

Windows 7/Vista Users should diasable UAC!!

Download Flasher:
Please download in this thread:
http://xdaforums.com/showpost.php?p=8976947&postcount=1


Download Firmware:
X10i:
http://www.multiupload.com/G9TENJASZI Nordic Thanks to imugur and Reb0rn
http://www.multiupload.com/RTIIRCEN79 GERMAN
http://www.multiupload.com/YM6SANFJXK CH (thanks to pippolino)

X10a:
http://www.multiupload.com/M048IDMI4L ROGERS (thanks to henh)
http://www.multiupload.com/ZGI6JWKIPG GENERIC (thanks to BluechipJ & batman112)
Put the extracted files into the new "firmware" Folder and run the X10flash.bat

SO-01:
http://www.multiupload.com/V01KSAFVYK DOCOMO MULTITOUCH [2.0.1.B.0.19] (thanks to indigomode)
all Languages incl. + JapaneseIME ,HangulIME ,ChineseIME.

http://www.multiupload.com/M6VKFS99ZY DOCOMO (thanks to indigomode)

You have to wipe your USERDATA !! This is important, otherwise you will enter Bootloops etc.
Also be sure SEUS is NOT running! (But at least it should have detected your phone once)

THIS FIRMWARE IS ONLY FOR X10 NOT FOR MINI (PRO) or X8 !
But the flashtool should be capable of flashing all Xperia Series now!
If someone decrypts the Rom you can try it :)

Regards
Bin4ry

If you have more ROMS, just drop me a PN and i will add them to this post!


IF YOU HAVE PROBLEMS LIKE "Unable to Open Channel" please try this guide:
 thanks aussiesausage
http://xdaforums.com/showpost.php?p=8945542&postcount=72
Click to expand...
Click to collapse
I've seen the word SEUS several times. Does it mean SONY-Ericsson Update Service?
 
You must log in or register to reply here.

Similar threads

jerpelea
[ROM] X10 Custom ROM AOSP | 2.1 & 2.2 | Discussion thread
Replies
6K
Views
2M
robertberma
robertberma
jerpelea
{X10}[DEVELOPMENT] -FXP130- CM7.2.0 - RELEASED - FreeXperia Project
Replies
15K
Views
5M
Erofich
Erofich
Tof37
[ROM]"X10S" |v9 Final released FTF File| 21/07/2012 |xperia s firmware ported to x10
Replies
4K
Views
1M
mugy
mugy
Bin4ry
[GUIDE] Root your X10 R2BA026 ! { Update 03.08.2010 R2BA026 Root with 2/3-Steps }
Replies
3K
Views
969K
mrjaydee82
mrjaydee82
arkedk
[Download] All X10 Firmwares
Replies
492
Views
590K
THeLogiC
THeLogiC

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 33
    Bin4ry
    Bin4ry
    Okay guys.
    Here is new X10flash for Firmware 2.1 Version

    Windows 7/Vista Users should diasable UAC!!

    Download Flasher:
    Please download in this thread:
    http://xdaforums.com/showpost.php?p=8976947&postcount=1


    Download Firmware:
    X10i:
    http://www.multiupload.com/G9TENJASZI Nordic Thanks to imugur and Reb0rn
    http://www.multiupload.com/RTIIRCEN79 GERMAN
    http://www.multiupload.com/YM6SANFJXK CH (thanks to pippolino)

    X10a:
    http://www.multiupload.com/M048IDMI4L ROGERS (thanks to henh)
    http://www.multiupload.com/ZGI6JWKIPG GENERIC (thanks to BluechipJ & batman112)
    Put the extracted files into the new "firmware" Folder and run the X10flash.bat

    SO-01:
    http://www.multiupload.com/V01KSAFVYK DOCOMO MULTITOUCH [2.0.1.B.0.19] (thanks to indigomode)
    all Languages incl. + JapaneseIME ,HangulIME ,ChineseIME.

    http://www.multiupload.com/M6VKFS99ZY DOCOMO (thanks to indigomode)

    You have to wipe your USERDATA !! This is important, otherwise you will enter Bootloops etc.
    Also be sure SEUS is NOT running! (But at least it should have detected your phone once)

    THIS FIRMWARE IS ONLY FOR X10 NOT FOR MINI (PRO) or X8 !
    But the flashtool should be capable of flashing all Xperia Series now!
    If someone decrypts the Rom you can try it :)

    Regards
    Bin4ry

    If you have more ROMS, just drop me a PN and i will add them to this post!


    IF YOU HAVE PROBLEMS LIKE "Unable to Open Channel" please try this guide:
     thanks aussiesausage
    http://xdaforums.com/showpost.php?p=8945542&postcount=72
    View
    3
    G
    gfgodoy
    EDIT:

    It works like a charm on X10a

    HSPDA network works. (i.e.: 3G in my region)
    Headphones WORK
    AngryBirds WORK
    WIFI WORKS


    Here's what happens:

    You download the two files listed by Binary
    Put the extracted firmware in the firmware directory (along with loader.sin)(10 sin files together)
    Open the .bat file (type in 1, 2 , 3 or 4 depending on your windows version).
    It will ask you: Please plug Xperia in flash mode so,

    Turn off your phone, press back and plug the usb cable! and Hit enter ( you should be quick, if you take to long it may not work, you have about 5 seconds. You know you are in flash mode because de GREEN LED on your X10 will stay ON)


    Your device will stay with the screen off while flashing. The .bat will be running and running like mad for about 2-3 minutes. After that WAIT for windows to tell you that it has finished. Hit ENTER. The .bat WILL CLOSE.


    On your device: Unplug your USB cable, wait for it to boot. I waited for like 2 minutes and nothing so I had to press POWER again.

    A device and a camera with a BLUE arrow will appear on your device screen. WAIT, WAIT, WAIT. It will reboot, and take like 2 minutes on sony ericson screen.

    It will boot up eventualy.



    That's it.
    Now lets go root! : http://xdaforums.com/showthread.php?t=824788


    Just download the SuperOneClickv1.5.1-ShortFuse version. I didn't use any other of those files attached in the link above.
    Turn USB debugging on. Settings -> Aplication -> Development

    Conect on USB (it should show on notification that you are debugging.)
    Press root. (on windows)

    It doesn't work, it stays in "Running rageagainstthecage..."

    You should now tick/untick the USB debugging mode on your phone to make it work. (just look at the oneclick terminal. If it is halted untick/tick, wait till it stops again.

    Took me like 5 minutes, and ROOTED appeared on my laptop screen.




    BARNACLE WIFI TETHER WORKS ;)


    Thanks:
    Binary, somebloke, CVCHETAN, XperiaX10iUser, developers on supleroneclickroot, imugur and Reb0rn for making it all possible!




    (we now have Rooted Android 2.1 :( something that was possible since the beggining of the year on mhy G1 LOL.)
    View
    2
    david_kurtovic
    david_kurtovic
    SUCCESSFULLY INSTALLED THE DUALTOUTCH UPDATE ON MY x10i

    Hello guys :D

    I just installed the update on my x10i

    I discovered that the "userdata.sin" is missing from the FW what caused the Boot Loop

    I attached the file....

    Download it and extract it to the FW Folder where the rest of the Update files is (kernel.sin system.sin etc...) then flash it again... and it should work for all of you!! :D

    David
    View
    1
    MarylandCookie
    MarylandCookie
    Was waiting for this :)
    Thumbs up!
    View
    1
    Bin4ry
    Bin4ry
    Stormwindfighter said:
    What is wrong?
    Tested it with Win7 x64, Win7 x86 and Win XP X86.
    I have a Xperia X10 mini pro(unbranded).
    Code: 
    01.11.2010 11:32:54 X10flash main
INFO: start
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=1,flags=1,length=46
01.11.2010 11:32:54 X10flash testPluged
INFO: <<<VER="R8A029";DATE="20100601";TIME="12:17:00"; 
01.11.2010 11:32:54 X10flash writeCmd
INFO: write(cmd=1) (finish)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=1,flags=1,length=574
01.11.2010 11:32:54 X10flash testCmd01
INFO: <<<PROT_VER="01";DATE="20100601";TIME="12:17:00";VER="R8A029";UNIQUE_DEV_ID="8C3677E1F7B87E7AD2C000A7D7BE01E3CBEE408B";CXC="1229-3593";TYPE="S1_EROM";SEC_LOCK_STATUS="LOCKED";MAN_ID="0020";DEV_ID="00BC";EROM_AID="0001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";IMEI="01234200285470";MSN="CB511LAEGE";SIN_VER="0001";SIMLOCK_TAMP="TAMPERED";AID_TAMP="NOT_TAMPERED";LOADER_ROOT="S1_Loader_Root_8e35";EROM_ROOT="S1_EROM_Root_f54f";SW_ROOT="S1_SW_Root_3edc";CUST_ROOT="S1_Cust_Root_732f";SIM_LOCK_ROOT="S1_SL_Root_a640";HW_CONF_ROOT="S1_HWConf_Root_4b8c"; 
01.11.2010 11:32:54 X10flash writeCmd
INFO: write(cmd=9) (finish)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=9,flags=1,length=0
01.11.2010 11:32:54 X10flash writeCmd
INFO: write(cmd=10) (finish)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=10,flags=1,length=0
01.11.2010 11:32:54 X10flash writeCmd
INFO: write(cmd=5) (finish)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=5,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd
INFO: write(cmd=7) (finish)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=7,flags=1,length=93
01.11.2010 11:32:54 X10flash testCmd07
INFO: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed" 
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd2
INFO: write(cmd=6) (continue)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
01.11.2010 11:32:54 X10flash writeCmd
INFO: write(cmd=6) (finish)
01.11.2010 11:32:54 X10flash readReply
INFO: <<< cmd=6,flags=0,length=0
Exception in thread "main" java.lang.NullPointerException
        at java.lang.String.<init>(Unknown Source)
        at X10flash.testPluged(X10flash.java:106)
        at X10flash.run(X10flash.java:379)
        at X10flash.main(X10flash.java:421)
Drücken Sie eine beliebige Taste . . .
    Click to expand...
    Click to collapse

    OMG!
    This is for X10 NOT MINI PRO! You are trying to flash a X10 firmware on a mini pro! DONT DO THIS!

    Regards
    Bin4ry
    View

New posts