Hey guys, I have noticed many people trying to return to 4.1 roms after flashing the new firmware from the 4.3 update and then their touchscreens not work. As a result, many people have had to resort to running the 1.29.651.10 RUU in order to get a working touchscreen again.
In order to help alleviate this problem, I went ahead and pulled the touch panel img from the 1.29.651.10 decrypted RUU. This way, people can just downgrade their touch panel firmware instead of having to downgrade everything with the RUU.
It should be noted that that I am posting the touch panel img from the 1.29.651.10 RUU because the touch panel img was not included in the 1.31.651.2 OTA.
EDIT:
I decided to use this thread to keep the different touch panel firmwares in one location just in case anyone needs them for whatever reason it may be, so here are the zips:
1.29.651.10
3.04.651.2
3.05.651.5
So to flash this you need to be S-OFF and just rename the zip to "firmware" then boot into fastboot and run the following commands:
In order to help alleviate this problem, I went ahead and pulled the touch panel img from the 1.29.651.10 decrypted RUU. This way, people can just downgrade their touch panel firmware instead of having to downgrade everything with the RUU.
It should be noted that that I am posting the touch panel img from the 1.29.651.10 RUU because the touch panel img was not included in the 1.31.651.2 OTA.
EDIT:
I decided to use this thread to keep the different touch panel firmwares in one location just in case anyone needs them for whatever reason it may be, so here are the zips:
1.29.651.10
3.04.651.2
3.05.651.5
So to flash this you need to be S-OFF and just rename the zip to "firmware" then boot into fastboot and run the following commands:
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
Last edited: