[ROM][XXUFNL1][15Jan]Omega v31 ●►Android 4.4.2 & 4.3 & 4.1.2◄●Omega Files◄●►Themes◄●►

ankur47463 · Jan 2, 2013

Shamms said:
This rom is for international version of NII N7100.

I think N7105 is also an International Version.
If I am wrong, please correct me.

nagas88 · Jan 2, 2013

dream_catcher79 said:
Hi guys,i have N7105 and i flashed this rom but now i cant receive calls or anything..it says that i dont have a sim card in it but i do.
Do i need to flash a modem?

Sent from my GT-N7100 using xda premium

This rom is not compitable with ur phone its for n7100 not for n1705:thumbup:

Sent from my GT-N7100 using Tapatalk 2

---------- Post added at 06:17 AM ---------- Previous post was at 06:15 AM ----------

SMNE said:
Screen-off only or the phone resarts?

---------- Post added at 01:19 AM ---------- Previous post was at 01:16 AM ----------

Hi,

Restarting your phone usually kills those delays.

Restarting dint kill delay...

Any other solution:thumbup:

Sent from my GT-N7100 using Tapatalk 2

ankur47463 · Jan 2, 2013

nagas88 said:
This rom is not compitable with ur phone its for n7100 not for n1705:thumbup:

Sent from my GT-N7100 using Tapatalk 2

---------- Post added at 06:17 AM ---------- Previous post was at 06:15 AM ----------

Restarting dint kill delay...
Any other solution:thumbup:

Sent from my GT-N7100 using Tapatalk 2

Best solution for almost all the problems

TRY FLASHING AGAIN.

May be it might solve your problem.

satnam1 · Jan 2, 2013

Happy New Year to all. I tried to install on PhilZ-cwm6, but cant. Tried to install the CWM as mentioned in installation. But couldn't update new CWM. It stops at about 80% in ODIN. Please suggest. Thanx in advance.

ankur47463 · Jan 2, 2013

satnam1 said:
Happy New Year to all. I tried to install on PhilZ-cwm6, but cant. Tried to install the CWM as mentioned in installation. But couldn't update new CWM. It stops at about 80% in ODIN. Please suggest. Thanx in advance.

Better Go With Chenglu's CWM...
It's the best.

satnam1 · Jan 2, 2013

ankur47463 said:
Better Go With Chenglu's CWM...
It's the best.

Thanx for reply. I tried Chenglu's CWM. But I couldn't install it,neither through CWM nor through ODIN. It stops at about 80% in ODIN.

ankur47463 · Jan 2, 2013

satnam1 said:
Thanx for reply. I tried Chenglu's CWM. But I couldn't install it,neither through CWM nor through ODIN. It stops at about 80% in ODIN.

Restart the phone
Again go into Download mode

Step 1. Put your Galaxy Note 2 into Download mode by turning off your phone first then holding down Volume Down, Center Home, and Power buttons together.

Step 2. Once you see the warning screen, hit Volume Up button to enter ODIN Download Mode then connect a micro-USB cable from your Note 2 to your computer.

Step 3. If you don’t have Samsung USB drivers installed, go ahead and download it below and run it to install.

Download Samsung USB Drivers

Step 4. Next, download GalaxyNote2Root.zip

Download GalaxyNote2Root.zip

Step 5. Unzip the files. Next, open up the ODIN program by double-clicking on the .exe file.

Step 6. You should see a yellow-highlighted COM box with a random number. If you don’t see it, double-check your Windows drivers (the Samsung USB drivers you installed in Step 3) and unplug, plug your Note 2 back into your computer.

Step 7. DO NOT TOUCH ANYTHING ELSE and click on “PDA” button then find the file cwm6-root-note2.tar.

Step 8. Hit Start and let ODIN flash the custom CWM Recovery. When it’s done, your Galaxy Note 2 will reboot and you should have a fully rooted Galaxy Note 2.

Your phone will boot into newly installed CWM Recovery automatically once and install Superuser app and su binaries then reboot.

You should find a new Superuser app called “SuperSU”.

You can easily verify you have root by downloading Titanium Backup app (free on Play Store) and running it. You should get a nice Superuser permission pop-up window.

satnam1 · Jan 2, 2013

ankur47463 said:
Restart the phone
Again go into Download mode

Step 1. Put your Galaxy Note 2 into Download mode by turning off your phone first then holding down Volume Down, Center Home, and Power buttons together.

Step 2. Once you see the warning screen, hit Volume Up button to enter ODIN Download Mode then connect a micro-USB cable from your Note 2 to your computer.

Step 3. If you don’t have Samsung USB drivers installed, go ahead and download it below and run it to install.

Download Samsung USB Drivers

Step 4. Next, download GalaxyNote2Root.zip

Download GalaxyNote2Root.zip

Step 5. Unzip the files. Next, open up the ODIN program by double-clicking on the .exe file.

Step 6. You should see a yellow-highlighted COM box with a random number. If you don’t see it, double-check your Windows drivers (the Samsung USB drivers you installed in Step 3) and unplug, plug your Note 2 back into your computer.

Step 7. DO NOT TOUCH ANYTHING ELSE and click on “PDA” button then find the file cwm6-root-note2.tar.

Step 8. Hit Start and let ODIN flash the custom CWM Recovery. When it’s done, your Galaxy Note 2 will reboot and you should have a fully rooted Galaxy Note 2.

Your phone will boot into newly installed CWM Recovery automatically once and install Superuser app and su binaries then reboot.

You should find a new Superuser app called “SuperSU”.

You can easily verify you have root by downloading Titanium Backup app (free on Play Store) and running it. You should get a nice Superuser permission pop-up window.

I already downloaded cwm6-root-n7100.tar from Chenglu's thread. But couldn't istall. Ok thanx, I should try again.

yann06 · Jan 2, 2013

Since I'm using a 64gb sdcard I'm running perseus kernel.. So far so good..
Rom 9.1 feels good to me.. No problem at all..
I like the light on function on lock screen

Envoyé depuis mon GT-N7100 avec Tapatalk

nagas88 · Jan 2, 2013

dream_catcher79 said:
Hi guys,i have N7105 and i flashed this rom but now i cant receive calls or anything..it says that i dont have a sim card in it but i do.
Do i need to flash a modem?

Sent from my GT-N7100 using xda premium

This rom is not compitable with ur phone its for n7100 not for n1705:thumbup:

Sent from my GT-N7100 using Tapatalk 2

---------- Post added at 06:17 AM ---------- Previous post was at 06:15 AM ----------

SMNE said:
Screen-off only or the phone resarts?

---------- Post added at 01:19 AM ---------- Previous post was at 01:16 AM ----------

Hi,

Restarting your phone usually kills those delays.

Restarting dint kill delay...

Any other solution:thumbup:
Formated n reflashed now wrking fine:thumbup::thumbup:

:beer:
Sent from my GT-N7100 using Tapatalk 2

goctopus · Jan 2, 2013

Thank you thank you ..... it worked great ...
Happy new year

satnam1 · Jan 2, 2013

satnam1 said:
I already downloaded cwm6-root-n7100.tar from Chenglu's thread. But couldn't istall. Ok thanx, I should try again.

Ankur, generally how long it takes to install cwm with odin? Blue bar on Note is about 40% from last 15 mins, but no restart.

gimmick56 · Jan 2, 2013

Original posted by dream_catcher79

Hi guys,i have N7105 and i flashed this rom but now i cant receive calls or anything..it says that i dont have a sim card in it but i do.
Do i need to flash a modem?

Sent from my GT-N7100 using xda premium

Hi mates,

Please "read" bevore flashing.
This rom is ONLY for international
NOTE 2 (GT-N7100) and NOT for GT-N7105.
Try to flash original firmware for N7105
from the special N7105-thread with Odin and Root your phone again.
Than look in the N7105-thread for a Rom do you want to flash and try it.

Many regards

Sorry for my bad english

Gesendet von meinem GT-N7100

ankur47463 · Jan 2, 2013

satnam1 said:
Ankur, generally how long it takes to install cwm with odin? Blue bar on Note is about 40% from last 15 mins, but no restart.

Maximum 2 minutes.

Try flashing using some different computer or use mobile ODIN.

phazeman · Jan 2, 2013

natispain said:
My card too.

Enviado desde mi GT-N7100 usando Tapatalk 2

I have a SanDisk Class10 32GB SDHC card for about 3 weeks and suddenly, after 9.1 installation with Perseus kernel it started giving me the SD Card Detached Unexpectedly error, when it attaches it immediately. I've tried to put my finger on the cause and didn't success.. I've formatted the card in the phone and on the PC (for all the scenarious) and installed the 9.1 fresh clean with all wipes (problem not gone), installed perseus kernel (problem not gone), installed stock kernel back (problem not gone), flashed another rom (problem not gone), flashed stock rom (problem not gone). BTW in all stages of tests the card IS readable in the PC. the only thing that could make this error stop appearing was turning on the "Protect SD Card" in the development options, but then you can't see things that are located on the SD Card from the gallery for example, and some videos disappears in the file manager, etc... once i removed that option the error started appearing again. I will replace that card with a new one with the warranty, but I am really interested to find the reason of it. I've tried to see the dmsg log (cat /proc/kmsg > /sdcard/dmsg.txt via adb) and the only things relative to card that i've found were those messages:

<7>[108063.505540] c3 usb 1-2: usb auto-suspend
<6>[108063.542123] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
<7>[108063.542222] c0 usb 1-2: usb auto-resume
<6>[108063.543716] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

no I/O errors spotted in that log.

Furthermore, today, it gave me the "Damaged SD Card' error, but recognized it back after less then a minute.

can someone please give me an idea about what else can i check ?

---------- Post added at 11:30 AM ---------- Previous post was at 10:57 AM ----------

BTW, as i can see from this thread, i'm not the only one experiencing the problem described above, but i really do want to find out the reason or the relative log messages since i have a friend working in SanDisk and can help debugging and fixing the error with those SD cards...

WM_Rizzo · Jan 2, 2013

Can I use TWRP recovery to install or must it be CWM?

And are the S-Pen apps working like on the stock?

aiglegris91 · Jan 2, 2013

WM_Rizzo said:
Can I use TWRP recovery to install or must it be CWM?

And are the S-Pen apps working like on the stock?

i allways flash with CWM
and yes s-pen works fine

WM_Rizzo · Jan 2, 2013

aiglegris91 said:
i allways flash with CWM
and yes s-pen works fine

Thanx for the speedy reply :good: Guess I'll have to flash CWM then.

FlatOutRU · Jan 2, 2013

Guys, when i was at stock 4.1.1 everytimes i opened any url`s Chrome opened, but now in Omega rom stock browser opens instead of chrome and every pop windws also uses stock browser. How can i change that?

ikkifcporto · Jan 2, 2013

its me exactly the same thing with the same SD card that you! please help. thank you

phazeman said:
I have a SanDisk Class10 32GB SDHC card for about 3 weeks and suddenly, after 9.1 installation with Perseus kernel it started giving me the SD Card Detached Unexpectedly error, when it attaches it immediately. I've tried to put my finger on the cause and didn't success.. I've formatted the card in the phone and on the PC (for all the scenarious) and installed the 9.1 fresh clean with all wipes (problem not gone), installed perseus kernel (problem not gone), installed stock kernel back (problem not gone), flashed another rom (problem not gone), flashed stock rom (problem not gone). BTW in all stages of tests the card IS readable in the PC. the only thing that could make this error stop appearing was turning on the "Protect SD Card" in the development options, but then you can't see things that are located on the SD Card from the gallery for example, and some videos disappears in the file manager, etc... once i removed that option the error started appearing again. I will replace that card with a new one with the warranty, but I am really interested to find the reason of it. I've tried to see the dmsg log (cat /proc/kmsg > /sdcard/dmsg.txt via adb) and the only things relative to card that i've found were those messages:

<7>[108063.505540] c3 usb 1-2: usb auto-suspend
<6>[108063.542123] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]
<7>[108063.542222] c0 usb 1-2: usb auto-resume
<6>[108063.543716] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

no I/O errors spotted in that log.

Furthermore, today, it gave me the "Damaged SD Card' error, but recognized it back after less then a minute.

can someone please give me an idea about what else can i check ?

---------- Post added at 11:30 AM ---------- Previous post was at 10:57 AM ----------

BTW, as i can see from this thread, i'm not the only one experiencing the problem described above, but i really do want to find out the reason or the relative log messages since i have a friend working in SanDisk and can help debugging and fixing the error with those SD cards...

[ROM][XXUFNL1][15Jan]Omega v31 ●►Android 4.4.2 & 4.3 & 4.1.2◄●Omega Files◄●►Themes◄●►

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts