[Aug 08,2013][JB4.2.2][ SLIM ROM 8.0][Unofficial][Data2Ext/NativeSD][Source Compiled]

hitman1376 · Apr 19, 2014

NativeSD

TheArt said:
So maximum is 210 + 170 = 380MB its not slim . If I install it to nativesd I dont must flash or format or dalvik, right? Only install from zip? Thanks

Well ... If you want to install NativeSD ... First if you haven't partitioned your SDcard , you should partition your SD Card , Remember that it'll erase all your SDcard so make a copy of them ( I Recommend to install DataOnEXT for EU and NAND for T-Mobile ) at least make partitions of 1GB for best performance and finally install as NativeSD and give the "NativeSD" folder to MAGLDR to boot it for you ... Thats it ... If had any Questions I would be Glad to answer ... Good luck

With Best Wishes
Hitman1376

TheArt · Apr 19, 2014

Thanks for Your replies but i have one more question

Can I have first system DataOnExt and second on NativeSD? I have now Pixeldroid installed in DataOnExt and I try install SlimRom in native but not working. Maybe both of them use the same Ext4 partition and it generated errors? I created two Ext 4 partition, first 1,9GB for Pixeldroid and second 1GB but Aromainstaller not ask me about it.

PS. Do you understand my english?

hitman1376 · Apr 19, 2014

Don't Think So ...

TheArt said:
Thanks for Your replies but i have one more question

Can I have first system DataOnExt and second on NativeSD? I have now Pixeldroid installed in DataOnExt and I try install SlimRom in native but not working. Maybe both of them use the same Ext4 partition and it generated errors? I created two Ext 4 partition, first 1,9GB for Pixeldroid and second 1GB but Aromainstaller not ask me about it.

PS. Do you understand my english?

Your Welcome

... Dear friend ... As this ROM isn't based On Pixelfreak's ROM , It shouldn't make any problem for you ... but I recommend you to Backup your current ROM and then try installing this ROM on the EXT ( This way it's Safer ) ... But anyway I don't think it makes any error... I currently have : BOXMAX S3.5 + Mokee 4.2.2 + FireFoxOS + Chautien's 4.4.2 On NativeSD and they don't make any Errors ... Good Luck With Dual- Booting AND ROMs :good: ...

With Best Wishes
Hitman1376

TheArt · Apr 19, 2014

Can I have first rom on NAND+DataOnExt and others on NativeSD? Or first must be on NAND (without Ext).

hitman1376 · Apr 19, 2014

Yep ...

TheArt said:
Can I have first rom on NAND+DataOnExt and others on NativeSD? Or first must be on NAND (without Ext).

Sure ... You can ... That's Possible but remember that the ROMs Shouldn't be from the same Base For example you can't have The same ROM On Both Data2EXT and NativeSD Because the ROM files may interfere with each other ... That's it ... and I'm Sure that you can have PixelDroid ROM on DataOnEXT and SLIMROM on NativeSD ( but for more safety I recommend to make a backup of the Data On EXT ROM and then flash the NativeSD ROM ) ... Good luck

With Best Wishes
Hitman1376

macs18max · Jul 23, 2014

Hmm... I am thinking of releasing a rom with ION kernel 3.0.xx

Now I may go for slimkat or liquid smooth.....

Although I there is more chances of going for liquid smooth as I already have sources and just need to update it...
and I dont have slimkat sources anymore. (also i never got it booting with ION kernel which pissed me off and deleted the whole thing)

But still would like to see someone convincing me to go for slimkat over liquidsmooth.

Robbie P · Jul 23, 2014

macs18max said:
But still would like to see someone convincing me to go for slimkat over liquidsmooth.

you aint gonna get "x is better than y" from me.

but if y has less chance of being trashed than x, .....

macs18max · Jul 23, 2014

Robbie P said:
you aint gonna get "x is better than y" from me.
but if y has less chance of being trashed than x, .....

Haha. Thanks for the reply robbie....

I think I will compile both.... but downloading slim sources with take my 12 hour

Right now compiling Liquidsmooth... lets see if it boots..
Have already compiled "dirtyunicorns" have tons of features...Dont know why i'm not happy with it... (Interface is similar to carbon which I dont like)

I think the winner would be slim (if it boots) Coz of languages it suppost. Liquid smooth changes their interface everyday probably language translation may be hard to keep up with(just an assumption)

Wish me luck

Almost 2 hours and still compiling... Jelly bean 4.2.2 was at the most an hour.. Why kitkat why?

gilbert32 · Jul 26, 2014

macs18max said:
Haha. Thanks for the reply robbie....

I think I will compile both.... but downloading slim sources with take my 12 hour

Right now compiling Liquidsmooth... lets see if it boots..
Have already compiled "dirtyunicorns" have tons of features...Dont know why i'm not happy with it... (Interface is similar to carbon which I dont like)

I think the winner would be slim (if it boots) Coz of languages it suppost. Liquid smooth changes their interface everyday probably language translation may be hard to keep up with(just an assumption)

Wish me luck

Almost 2 hours and still compiling... Jelly bean 4.2.2 was at the most an hour.. Why kitkat why?

Chromium_org. the source of all problems for web on hd2 (pmem), black screens, some lags (only a little) and no HWA.
if we could use old webkit like in <= 4.3, maybe we can have it fully working (no black screen anywhere), but until now, no luck

macs18max · Jul 26, 2014

gilbert32 said:
Chromium_org. the source of all problems for web on hd2 (pmem), black screens, some lags (only a little) and no HWA.
if we could use old webkit like in <= 4.3, maybe we can have it fully working (no black screen anywhere), but until now, no luck

Well for me its been disaster..

Slimkat systemUI force closes......

In C-rom works well but I have this error "Dropping event because there is no touchable window at (-5, -5)"

Now I'm compiling cm11/stable.... But I have external/iproute2 error...

Still trying to figure out how to get around cm11

chautruongthinh · Jul 27, 2014

macs18max said:
Well for me its been disaster..

Slimkat systemUI force closes......

In C-rom works well but I have this error "Dropping event because there is no touchable window at (-5, -5)"

Now I'm compiling cm11/stable.... But I have external/iproute2 error...

Still trying to figure out how to get around cm11

You can replace external/iproute2/tc/q_prio.c from Slimkat to fix your error!

gilbert32 · Jul 27, 2014

chautruongthinh said:
You can replace external/iproute2/tc/q_prio.c from Slimkat to fix your error!

or use include/linux/pkt_sched.h from 3.0.x kernel (or maybe 3.4, just make sure it has the "enable_flow" inside)
if you have other problems (which you might have eventually) just ask and we will help

cm11 so far needs the biggest number of fixes yet

macs18max · Jul 27, 2014

gilbert32 said:
or use include/linux/pkt_sched.h from 3.0.x kernel (or maybe 3.4, just make sure it has the "enable_flow" inside)
if you have other problems (which you might have eventually) just ask and we will help

cm11 so far needs the biggest number of fixes yet

Yes I did that to fix the issue.
Earlier I used evervolvs .38 whiles compiling ROM, then I use 3.0 kernel and solved the issue...
ROM boots...
Will create a thread for testing, just have to make some mods to installer first..
Thanks guys for the support

Topics

Topics

[Aug 08,2013][JB4.2.2][ SLIM ROM 8.0][Unofficial][Data2Ext/NativeSD][Source Compiled]

hitman1376

Senior Member

TheArt

Senior Member

hitman1376

Senior Member

TheArt

Senior Member

hitman1376

Senior Member

macs18max

Senior Member

Robbie P

Senior Member

macs18max

Senior Member

gilbert32

Senior Member

macs18max

Senior Member

chautruongthinh

Senior Member

gilbert32

Senior Member

macs18max

Senior Member

Similar threads

Top Liked Posts

New posts