Motorola Fire XT / XT-530 / XT-531 ROOTING / SBFs / Custom ROMs / CWM

Search This thread

Arijit.Ray81

Senior Member
Jul 23, 2010
914
191
Bangalore
Disclaimer:
I am not responsible for anything that happens to your phone, your computer or anything else while following these instructions. Proceed at your own risk.


NEW ONE CLICK ROOT

Special Thanks to rootdefyxt320

BAT version
EXE version

SUTLR method

Downloads:
Here are the apps/files needed for Rooting -
1. SuperOneClick 2.3.3.0
2. SUT LR 1.8.2 (Doesn't seem to be working on 64-bit systems)
3. FXX_PR3_NV.xml and NvDefinition.xml [ATTACHED]

Before Rooting:
Prepare your phone by doing the following:
- Go to Settings > Applications > CHECK "Unknown Sources"
- Go to Settings > Applications > Developer > CHECK "USB Debugging" and "Stay Awake"
- Connect your phone via USB, when prompted DO NOT select USB Mass Storage.
- Extract FXX_PR3_NV.xml and NvDefinition.xml from the attached zip file in to a folder

- Now, install SUT LR, run the app
- Select the FXX_PR3_NV.xml [ensure NvDefinition.xml is also in the same folder as FXX_PR3_NV.xml]
- Your phone will restart.

It does NOT erase anything on the phone, since it only patches the ROM.

Rooting:
After the phone restarts, open SuperOneClick and select root. It will take less than a minute to finish.

Credits & Special Thanks to 7amdoun for the New Instructions.


For Folks for whom the above instructions DO NOT work; please follow instructions at THIS LINK

UPDATE your Phone to the latest FIRMWARE HERE

* YOU CAN UPDATE UNROOTED PHONES ONLY!


Could someone take the initiative to MOD this phone? Create some custom ROMs and Themes? I believe Motorola is not providing an ICS update for this phone but some skilled developers can surely help us get the ICS feel on it. I would appreciate if someone could take their time out and get to work on this. I would extend any help I can give.



Increasing Internal Phone Memory

Credits to Pianorcar for this.

You need –



Steps –

  1. Download and Install Link2SD on your phone
  2. Backup the existing data on the SD Card
  3. Install MiniTool Partition and open it
  4. Delete the existing Partition on the SD Card
  5. Right Click on the “Unallocated” SD Card once again and select “Create”
  6. Create a “Primary Partition”, File System as ”Fat32” and specify the “Partition Size
  7. Click OK
  8. Right Click on the remaining “Unallocated” space
  9. Create a “Primary Partition”, File System as “Ext2
  10. Click OK
  11. Start Link2SD and select Ext2
  12. Restart your phone
  13. Start Link2Sd again
  14. The SD Card should now be mounted and you can click “Create Link” on the apps you want to send to the SD Card
  15. The App now will be completely moved to the SD Card

1.jpg 2.jpg


Which apps to safe to move to SD? Look HERE
Thanks to Kammii


Increase SD Card Speed up to 200%​

Required -



  1. Run SD Tools and test the speed of your SD Card
  2. Open SD Speed Increase and move the slider to 1024
  3. Save the Setting
  4. Now Run SD Tools again and test if the speed has increased
  5. Try different settings with SD Speed Increase and save the best setting to start at boot.
* 2048 worked best for me.




SBFs for Motorola Fire XT 530/531
NOT Custom ROMs


You would need RSD Lite 5.6 to flash the SBFs.

*NOTE: Chinese ROM does NOT have Google apps, Market. European ROM has everything

European 2.3.5: DMP-4480-0-4017-A01_RFM


Latin American SBFs:
Claro
Entel

Chinese 2.3.5: DMP-4480-0-7009-A02_RFM

Another ROM - DMP-454A-0-2010-A03_RFM(RETAIL) - Suggested by cmndst. Claims are that the ROM is excellent. I have not tried it personally so I leave it up to you folks to try and comment about it.

Credits & Special Thanks to 7amdoun for the SBFs.




CUSTOM ROM HERE​









Here is how you can flash CWM
 

Attachments

  • FXX_PR3_NV.zip
    65 KB · Views: 9,663
  • RSDLite5.6.rar
    4.4 MB · Views: 7,544
Last edited:

Arijit.Ray81

Senior Member
Jul 23, 2010
914
191
Bangalore
just hold the power button and volume keys together . hold it till the moto logo appears. it will enter to recovery mode. from here you can select "restore to factory settings"

note: use volume keys for up/down and power button to select. touch will not work

---------- Post added at 07:46 PM ---------- Previous post was at 07:24 PM ----------

succesfully rooted this phone.. great thanks to Arjith(jeet.9890427233)

note to rooters. the SUTLR 1.8.2 will work on Windows Vista or XP 32 bit.
If the application says "phone not connected" try installing the driver MotoHelper and try to get it done by Superoneclick.

some root application i'm using now:
LINK2SD- for solving the storage memory issue
BusyBox- dono what it is used for
LCD Resolution- Sets custom Resolution to our display
PowerAmp- Cracked full version- Best MP3 player for Android
SD Speed increase- Increase Transfer rate. (13mb/s for down and 4mb/s for up)
SetCPU- Optimize CPU clocks based on our battery health/ Program requirements

I feel like my Moto FIREXT got a freedom.

What resolution are you using? It is already at 160.
 

saishibu38380

Member
Jan 26, 2012
44
6
Re: about rooting of motorola fire xt(530xt)

im now using 130.
120 looked very small. actually what these mean?? should i go for higher value or least one?
the battery icon is now upright, network bars are green

---------- Post added at 10:54 PM ---------- Previous post was at 10:44 PM ----------

I tried that, motorola sign shows up and in upper left corner it says enter recovery mode, but then only green android little men is shown with big white triangle abowe him with Exclamation mark insade triange. I try pressing volume buttons but nothig happens.

i too have the same problem after updating to 2.3.5. i guess there is some problem with moto update
 

Arijit.Ray81

Senior Member
Jul 23, 2010
914
191
Bangalore
im now using 130.
120 looked very small. actually what these mean?? should i go for higher value or least one?
the battery icon is now upright, network bars are green

Higher value would mean less screen real estate.. so icons will look bigger and you will have less space on your screen.

I'm curious though.. how did you manage to change the dpi? coz I cant seem to be able to restart the phone to apply the effect.
 

pwel

Senior Member
Dec 26, 2006
368
140
I try that but it says that There is no software update currently available for your mobile device. I try to take my phone to service (not an official Motorola service in my country) and they try to fix my phone but failed :( I don't think I delete MotoSwitch, I delete some news and weather app and some app for e-mails. I gues I'll take my phone to the official service and have them charge me 100 euros to fix my phone :(

See my post #28 in modmymobile.com/forums/402-general-motorola-android/561090-how-create-update-zip-2.html

There is this guy daywalker who helped me out. Just pm him.

Sent from my XT532 using XDA
 

Arijit.Ray81

Senior Member
Jul 23, 2010
914
191
Bangalore
Cyanogen 9 has finally been ported to the Galaxy Ace.
Since our Fire XT and the Ace use the same hardware (Chipset, CPU, and Graphics), porting this ROM to our phone will be very easy.

Once Cyanogen 9 is officially released and cyanogen 9 for Ace is updated and stabilized, I might (if I have time) start creating a Custom Recovery for our phone. Hopefully the ROM itself won't need too much work to make it fully functional.


http://xdaforums.com/showthread.php?t=1490867

Have you created a custom recovery for XT530 yet? I bricked my phone and could really use some help. I dont think the damage is much though.. I was changing the LCD Density and then when I restarted the phone, it went in to a boot loop. I believe that replacing the modified file with the original ones could solve the issue. However, I'm not sure which files to replace, where they are located, how to get the original ones and how to push them in. Can you help?
 

Tushar13

New member
Dec 29, 2011
1
0
Delhi
Overclocking

Hi guys..
I have rooted my phone successfully. (thanks to jeet.9890427233) :)
now i want to overclock my phone to maximise the use of chainfire 3d.
I m using set cpu to overclock but its not able to do that although its able to underclock.
I have created that setcpu txt file(in my sd card) with custom values i.e 1ghz bt its now working.
plz help me if u can..:)
 

Dr. Hurt

Senior Member
Jan 31, 2012
819
455
Cairo
Have you created a custom recovery for XT530 yet? I bricked my phone and could really use some help. I dont think the damage is much though.. I was changing the LCD Density and then when I restarted the phone, it went in to a boot loop. I believe that replacing the modified file with the original ones could solve the issue. However, I'm not sure which files to replace, where they are located, how to get the original ones and how to push them in. Can you help?

I did, but ended up bricking my phone. Sent to repairs and got it fixed. I think we need expert help from someone who has more experience working on newer Motorola phones.

I'm not sure whether the problem is related to this particular phone or my lack of skills, or all new Motorola phones.

I gave up work for the foreseeable future as I don't have time, and don't wanna brick it again as I use for school work.

For the mean time, there is a Chilean ROM available here:
http://www.chileandroid.com/t7169-firmware-spice-xt531-claro-chile-gingerbread#65682

This should contain all G apps. I'm not sure if it's carrier specific though.
 
Last edited:

Arijit.Ray81

Senior Member
Jul 23, 2010
914
191
Bangalore
I found this rom for androd2.3.5xt531.sbf on other forum, 147mb is big. I dont have tried him, but if jou want...... 4pda.ru/forum

That's exactly what I tried. It worked.. however, when I booted up the ROM there was no Google Apps or even a way to configure a Google Account on the phone. I looked around and downloaded a gapps flashable zip.. and when I flashed it... my phone bricked..

Now, I can't even get the "M" logo when I start up the phone. When I start it.. the phone vibrates.. but that's about what it does.. nothing on the screen after that and nothing works..

I think I need to take it to the service station soon.. Unfortunately, it is my Mom's phone and I'm feeling kinda guilty to have bricked it and she is without a phone now. Additinally, all the warranty papers are back at my home 3000kms from where I am (I work here and my mom's visiting me). I'm not sure if Moto guys are even gonna look at it without papers..

So here is what I'm thinking - If Moto guys don’t fix it and make a fuss about it.. I'm gonna get a new phone for her.. and wait till she gets back home and sends me the paperwork and then I'll get it fixed...

Till then.. :(
 

Arijit.Ray81

Senior Member
Jul 23, 2010
914
191
Bangalore
I did, but ended up bricking my phone. Sent to repairs and got it fixed. I think we need expert help from someone who has more experience working on newer Motorola phones.

I'm not sure whether the problem is related to this particular phone or my lack of skills, or all new Motorola phones.

I gave up work for the foreseeable future as I don't have time, and don't wanna brick it again as I use for school work.

For the mean time, there is a Chilean ROM available here:
http://www.chileandroid.com/t7169-firmware-spice-xt531-claro-chile-gingerbread#65682

This should contain all G apps. I'm not sure if it's carrier specific though.

I appreciate your help bro.. Unfortunately.. I think I have bricked it pretty bad.. I am not even getting the "M" logo when I start the phone. The phone just vibrates and then nothing.. any ideas how we can go about fixed it with any "home-made" recipe? Or do I have to take it to the Motorola Service Station? Unfortunately, we don’t have one that is close to me in my city and thus it is a major issue for me. I really do not have the time to run about for it.. but let me see what I can do. Any help and ideas you can give would help.
 

Arijit.Ray81

Senior Member
Jul 23, 2010
914
191
Bangalore
Spoke with a couple of Devs to help the users in this forum with mods, themes etc. However, no one seems to be interested. I got a common response - "Motorola is too tightly locked up and we don't want to spend 90% of our time trying to unlock it in the 1st place". :(

I also, spoke with Motorola customer care to send me a copy of their ROM but they simply said - CAN'T DO! :(

Could the users of this phone, spread the word that we need developers in this forum and folks to help us mod this phone, etc. Let's also connect on FaceBook and discuss.

I appreciate all your help.
 

Dr. Hurt

Senior Member
Jan 31, 2012
819
455
Cairo
I appreciate your help bro.. Unfortunately.. I think I have bricked it pretty bad.. I am not even getting the "M" logo when I start the phone. The phone just vibrates and then nothing.. any ideas how we can go about fixed it with any "home-made" recipe? Or do I have to take it to the Motorola Service Station? Unfortunately, we don’t have one that is close to me in my city and thus it is a major issue for me. I really do not have the time to run about for it.. but let me see what I can do. Any help and ideas you can give would help.

Sorry, but I don't think there is a way to fix it at home.

Try this anyway:

Press camera, volume down, and power button together. This should boot into flash mode.

Install Motorola developer drivers: (http://developer.motorola.com/tools/usb_drivers/)

Connect phone.

Launch RSD and try flashing an SBF.
 
Last edited:

TheOldMonk

Senior Member
Mar 19, 2012
131
27
127.0.0.1 [TH/IN]
Cyanogen 9 has finally been ported to the Galaxy Ace.
Since our Fire XT and the Ace use the same hardware (Chipset, CPU, and Graphics), porting this ROM to our phone will be very easy.

Once Cyanogen 9 is officially released and cyanogen 9 for Ace is updated and stabilized, I might (if I have time) start creating a Custom Recovery for our phone. Hopefully the ROM itself won't need too much work to make it fully functional.


http://xdaforums.com/showthread.php?t=1490867

Please do so :) I am waiting to get a smartphone; on hold for now..waiting for "any good" custom ROMs to release. Thanks for supporting & god luck for your development.:D
 

Dr. Hurt

Senior Member
Jan 31, 2012
819
455
Cairo
Please do so :) I am waiting to get a smartphone; on hold for now..waiting for "any good" custom ROMs to release. Thanks for supporting & god luck for your development.:D

I quit working on the phone for the mean time. Read my post above.

Motorola is very stubborn when it comes to co-operating with 3rd party developers.

I tried everything, even bypassing signatures using skrilax_cz's work for the Cliq XT but ended up bricking the phone :(
 
Last edited:

saishibu38380

Member
Jan 26, 2012
44
6
Re: about rooting of motorola fire xt(530xt)

so how many bricked there motorola fire xt are here?

i too bricked when i took a back up of the ROM using the ROM Manager.
no Moto Service in my place. will be sending my phone to the nearby service centre(700+ km) on monday
 

Top Liked Posts

  • There are no posts matching your filters.
  • 64
    Disclaimer:
    I am not responsible for anything that happens to your phone, your computer or anything else while following these instructions. Proceed at your own risk.


    NEW ONE CLICK ROOT

    Special Thanks to rootdefyxt320

    BAT version
    EXE version

    SUTLR method

    Downloads:
    Here are the apps/files needed for Rooting -
    1. SuperOneClick 2.3.3.0
    2. SUT LR 1.8.2 (Doesn't seem to be working on 64-bit systems)
    3. FXX_PR3_NV.xml and NvDefinition.xml [ATTACHED]

    Before Rooting:
    Prepare your phone by doing the following:
    - Go to Settings > Applications > CHECK "Unknown Sources"
    - Go to Settings > Applications > Developer > CHECK "USB Debugging" and "Stay Awake"
    - Connect your phone via USB, when prompted DO NOT select USB Mass Storage.
    - Extract FXX_PR3_NV.xml and NvDefinition.xml from the attached zip file in to a folder

    - Now, install SUT LR, run the app
    - Select the FXX_PR3_NV.xml [ensure NvDefinition.xml is also in the same folder as FXX_PR3_NV.xml]
    - Your phone will restart.

    It does NOT erase anything on the phone, since it only patches the ROM.

    Rooting:
    After the phone restarts, open SuperOneClick and select root. It will take less than a minute to finish.

    Credits & Special Thanks to 7amdoun for the New Instructions.


    For Folks for whom the above instructions DO NOT work; please follow instructions at THIS LINK

    UPDATE your Phone to the latest FIRMWARE HERE

    * YOU CAN UPDATE UNROOTED PHONES ONLY!


    Could someone take the initiative to MOD this phone? Create some custom ROMs and Themes? I believe Motorola is not providing an ICS update for this phone but some skilled developers can surely help us get the ICS feel on it. I would appreciate if someone could take their time out and get to work on this. I would extend any help I can give.



    Increasing Internal Phone Memory

    Credits to Pianorcar for this.

    You need –



    Steps –

    1. Download and Install Link2SD on your phone
    2. Backup the existing data on the SD Card
    3. Install MiniTool Partition and open it
    4. Delete the existing Partition on the SD Card
    5. Right Click on the “Unallocated” SD Card once again and select “Create”
    6. Create a “Primary Partition”, File System as ”Fat32” and specify the “Partition Size
    7. Click OK
    8. Right Click on the remaining “Unallocated” space
    9. Create a “Primary Partition”, File System as “Ext2
    10. Click OK
    11. Start Link2SD and select Ext2
    12. Restart your phone
    13. Start Link2Sd again
    14. The SD Card should now be mounted and you can click “Create Link” on the apps you want to send to the SD Card
    15. The App now will be completely moved to the SD Card

    1.jpg 2.jpg


    Which apps to safe to move to SD? Look HERE
    Thanks to Kammii


    Increase SD Card Speed up to 200%​

    Required -



    1. Run SD Tools and test the speed of your SD Card
    2. Open SD Speed Increase and move the slider to 1024
    3. Save the Setting
    4. Now Run SD Tools again and test if the speed has increased
    5. Try different settings with SD Speed Increase and save the best setting to start at boot.
    * 2048 worked best for me.




    SBFs for Motorola Fire XT 530/531
    NOT Custom ROMs


    You would need RSD Lite 5.6 to flash the SBFs.

    *NOTE: Chinese ROM does NOT have Google apps, Market. European ROM has everything

    European 2.3.5: DMP-4480-0-4017-A01_RFM


    Latin American SBFs:
    Claro
    Entel

    Chinese 2.3.5: DMP-4480-0-7009-A02_RFM

    Another ROM - DMP-454A-0-2010-A03_RFM(RETAIL) - Suggested by cmndst. Claims are that the ROM is excellent. I have not tried it personally so I leave it up to you folks to try and comment about it.

    Credits & Special Thanks to 7amdoun for the SBFs.




    CUSTOM ROM HERE​









    Here is how you can flash CWM
    10
    What system apps you convert to sd card? (what is etc.....?) Any problems with your phone?

    Thanks a lot!

    Edit: Just realised that you may not know what the abbreviation "etc" means. If that's the case, it is an abbreviation for the term et cetera, which means "and other things" or "and so forth".

    No problems with my phone so far. I just avoid tampering with system apps that may cause irreversible problems (such as Android System, Settings, and MotoSwitch). Some system apps are no longer functional, but they can easily be made functional again by using Link2SD to "remove link" and convert them back to system apps.

    I now have 105MB of free internal storage (with 52MB used).

    Also, note that you want to use the "Create link" function in Link2SD not "Move to SD card". "Move to SD card" uses the system's native apps2sd method which is not as effective as that of Link2SD's.

    To give you an idea of things, here's a list of what system apps I've converted to user apps and have linked to the SD card and how they've been affected:
    • Browser – No longer functional. Opens but does not load webpages. That's easily reversed via Link2SD and then becomes fully functional again.
    • Email – No longer works. At start-up, I get a message that it has crashed. Easily reversed.
    • FM Radio – Works as normal.
    • FQC program – I believe this is an app used for quality checking at the factory, so I've never used it.
    • Gmail – Works as normal.
    • Google Play Store – Appears to work as normal.
    • Maps – Works as normal.
    • Moto [Chinese characters] (com.motorola.inputmethod.gpinyin) – Never used it, so don't know.
    • Moto Smart Handwriting – Never used it, so don't know.
    • News & Weather – No longer functional. Opens but does not work.
    • People Centric – No longer functional. When trying to add the widget, it places a message as the widget stating "Problem loading widget".
    • Qik Video – Never used it, but it fails to open. So it's no longer functional.
    • RSS Reader – No longer functional.
    • Street View – Never used it.
    • Swype – Can still be used. Just need to go into Language & Keyboard settings and tick it.
    • Talk – Appears to work as normal.
    • Voice Search – Works as normal.
    • Weather – Fully functional. Widget can still be added to home screen and used without problem.
    • YouTube – No longer functional.
    8
    I just can't believe this!!!

    I just found out that the GPU on our phone is disabled by default :( :( :(

    Force enabling it gave me "unbelievably" smooth graphics. Text no longer fades and blurs while scrolling. Also, the occasional lag I get while playing some games seems to have gone.

    However, the graphics drivers are very old and buggy which causes major graphics artefacts. Thats probably the reason Motorola has disabled the GPU.

    Motorola, in their ultimate wisdom, decided to disable the GPU altogether instead of updating the kernel, and adreno200 libs

    To try this, change the following in build.prop:

    debug.composition.type=mdp
    to
    debug.composition.type=gpu

    NB: screen will keep turning white while navigating thru system menus. Taping the screen will bring it back to life.

    And before someone asks, no we can't update the libs either as they require the Gingerbread kernel (.35) while we have the Froyo kernel (.32)
    6
    Some SBFs

    NB:
    To flash those, use RSD Lite 5.6
    Chinese ROM does NOT have Google apps, Market. European ROM has everything

    European 2.3.5:
    DMP-4480-0-4017-A01_RFM
    http://www.mediafire.com/?h73a80xuhs0ii8j

    Chinese 2.3.5:
    DMP-4480-0-7009-A02_RFM
    http://www.mediafire.com/?20qf909peofbodn

    Latin American SBFs:
    [Claro] http://www.grupoandroid.com/topic/41195-firmware-spice-xt531-claro-chile-gingerbread/

    [Entel] http://www.grupoandroid.com/topic/40427-firmware-spice-xt531-entel-chile-gingerbread/
    6
    Cyanogen 9 has finally been ported to the Galaxy Ace.
    Since our Fire XT and the Ace use the same hardware (Chipset, CPU, and Graphics), porting this ROM to our phone will be very easy.

    Once Cyanogen 9 is officially released and cyanogen 9 for Ace is updated and stabilized, I might (if I have time) start creating a Custom Recovery for our phone. Hopefully the ROM itself won't need too much work to make it fully functional.


    http://xdaforums.com/showthread.php?t=1490867