Features
- Fast
- Stable
- 4.2.2
- Almost everything works
- Phablet UI (like the Nexus 7 or Nexus 10)
- Linaro built
- OTA updates via Goo.im
- Google Edition Style
Download and install
Download the latest ROM to the device's internal memory, the external SD, whatever you're doing. You can get it from here:
Select the latest ROM from this page - Look at the dates!
You also will need the latest gapps for CM10.1 here:
Gapps at Goo.im
Coming from non-CM10.1 builds
You must be rooted and have SDE before this
THIS WILL WIPE YOUR INTERNAL SD, AFTER YOU HAVE FLASHED THE ZIPS
1.) Download this zip:
cwm-g9 to your PC
2.) Extract it
3.) Turn off your G9
4.) Power on whilst holding volume down, it will boot Archos recovery mode
5.) Select (Recovery System) > Developer Options > Flash initramfs and zImage (or similar)
6.) Plug your device into a PC, and a drive will appear
7.) Copy the extracted zImage and initramfs from the above zip
8.) Unmount the drive and press POWER to select OK on the device, it will flash the kernel
FROM THIS POINT YOUR DEVICE WILL NOT BOOT, BUT IT WILL BOOT INTO CWM
9.) Press OK to reboot, it will boot into CWM
10.) Select flash zip from sdcard, and select the ROM you downloaded
11.) Reboot your device
12.) When it has booted, copy the Gapps again to the internal memory
13.) Reboot back into recovery - This will be TWRP now
14.) Flash the gapps as you did before with the ROM, through Install and navigating the menus
NOTE: If your SD is your external SD, go back, select Mounts, then tick /data, then go to Install and navigate up and then into /data/media, this will be your internal SD
15.) Reboot, you are done
Coming from an old CM10.1 build
THE LATEST BUILD WIPES THE INTERNAL SD!
1.) Download the update to your device and the Gapps to your PC
2.) Boot into CWM/TWRP (Depends on version)
3.) Select Install, and flash the update
4.) Reboot your device
5.) When it has booted, copy the Gapps to the internal memory
6.) Reboot back into recovery - This will be TWRP now
NOTE: If your SD is your external SD, go back, select Mounts, then tick /data, then go to Install and navigate up and then into /data/media, this will be your internal SD
7.) Reboot, you have the latest CM10.1