Thomas.Raines presents
The Lightning Zap! kernel for the Skyrocket
ATTN:
I thomas.raines, nor my affiliates claim responsibility for anything you do to damage, destroy, brick, explode, or otherwise screw up your device.
I revamped the Lightning Zap! kernel across the board. Since I have so many of them I was loosing where I was on each one. So I have now broken it down into 3 phases:
Phase 1: Introduction of LZ kernel to device
Phase 2: Fine tuning of tweaks, values, etc
Phase 3: Implementation of OC/UV
Phase 4: Continue updating and adjusting as necessary
From now on I will name the .zip accordingly as well:
Sky_p2.1
On a good note, I think this latest update will finalize phase 2 and now I can work on OC/UV...
Features:
Improved performance
Improved battery life
Improved network speeds
Improved boot times
Smoother scrolling
Better responsiveness
Cleaner file systems
Governor tweaks for amazing speed and performance without sacrificing battery life
Improved Memory and Ram tweaks
Improved Internet speed
Amazing kernel tweaks, build.prop mods, init.d scripts and more!
Instructions:
Make a backup
Download LightningZapv1Sky.zip to PC
Transfer LightningZapv1Sky.zip to your sdcard
Or just download it straight to your phone
Reboot to recovery
Flash
Phone will automatically reboot after install**
Wait 10 minutes
Enjoy the Lightning Zap!
ATTN!
If you are currently on any version of Lightning Zap! kernel, you must either replace your build.prop from your ROM or re-flash your current ROM. Or you can open your build.prop with a text editor and delete all lines below the Lightning Zap Tweaks entry.
This kernel was tested on ParanoidAndroid. This kernel and tweaks will work with any version of CM10 post 14OCT.
**First boot, especially after a fresh install of your ROM (wipe system cache etc, flash ROM gapps Lightning Zap) will take a while. It will seem to hang between a blank screen (which use to be the 2nd boot splash) and the boot animation. There is no need to panic. Everything is fine. It is the vacuum script trying to clean databases that have yet to be created. After first boot, your phone will boot as normal (a little faster actually)...
After first boot, ensure your I/O scheduler is set to cfq and your governor is set to ondemand to gain the maximum benefits of Lightning Zap!
See 3rd post for further instructions on improving and customizing your Lighting Zap! experience.
Source Code:
msm8660-common_lz_kernel
vendor_lz-kernel (LZ vendor files for ROM compiling)
LZ Flashing Packages (For those of you just compiling the kernel)
Includes flashing script, binaries, etc for the Blaze, Nitro and Skyrocket
Special thanks to:
gs2usr for the link to source code...
xan for Voltage Control app
The Lightning Zap! kernel for the Skyrocket
ATTN:
I thomas.raines, nor my affiliates claim responsibility for anything you do to damage, destroy, brick, explode, or otherwise screw up your device.
I revamped the Lightning Zap! kernel across the board. Since I have so many of them I was loosing where I was on each one. So I have now broken it down into 3 phases:
Phase 1: Introduction of LZ kernel to device
Phase 2: Fine tuning of tweaks, values, etc
Phase 3: Implementation of OC/UV
Phase 4: Continue updating and adjusting as necessary
From now on I will name the .zip accordingly as well:
Sky_p2.1
On a good note, I think this latest update will finalize phase 2 and now I can work on OC/UV...
Features:
Improved performance
Improved battery life
Improved network speeds
Improved boot times
Smoother scrolling
Better responsiveness
Cleaner file systems
Governor tweaks for amazing speed and performance without sacrificing battery life
Improved Memory and Ram tweaks
Improved Internet speed
Amazing kernel tweaks, build.prop mods, init.d scripts and more!
Instructions:
Make a backup
Download LightningZapv1Sky.zip to PC
Transfer LightningZapv1Sky.zip to your sdcard
Or just download it straight to your phone
Reboot to recovery
Flash
Phone will automatically reboot after install**
Wait 10 minutes
Enjoy the Lightning Zap!
ATTN!
If you are currently on any version of Lightning Zap! kernel, you must either replace your build.prop from your ROM or re-flash your current ROM. Or you can open your build.prop with a text editor and delete all lines below the Lightning Zap Tweaks entry.
This kernel was tested on ParanoidAndroid. This kernel and tweaks will work with any version of CM10 post 14OCT.
**First boot, especially after a fresh install of your ROM (wipe system cache etc, flash ROM gapps Lightning Zap) will take a while. It will seem to hang between a blank screen (which use to be the 2nd boot splash) and the boot animation. There is no need to panic. Everything is fine. It is the vacuum script trying to clean databases that have yet to be created. After first boot, your phone will boot as normal (a little faster actually)...
After first boot, ensure your I/O scheduler is set to cfq and your governor is set to ondemand to gain the maximum benefits of Lightning Zap!
See 3rd post for further instructions on improving and customizing your Lighting Zap! experience.
Source Code:
msm8660-common_lz_kernel
vendor_lz-kernel (LZ vendor files for ROM compiling)
LZ Flashing Packages (For those of you just compiling the kernel)
Includes flashing script, binaries, etc for the Blaze, Nitro and Skyrocket
Special thanks to:
gs2usr for the link to source code...
xan for Voltage Control app
Last edited: