FORUMS
Remove All Ads from XDA
Post Reply Email Thread
Ok Guys,

after playing a little bit with my Razr running the T-Mobile ICS Leak i got it finaly bricked

< CRACKFLASHER

Don't ask how i did this, that doesn't matter

I tryed to restore my Backup that i did before in CWM, but get an Error restoring the System.
So my only way back to an working Phone was RSD an here I'm.

I'll post you my .XML-File for the T-Mobile 2.3.6, so maybe you can do it the same way > Just Copy & Paste.

<?xml version="1.0" encoding="UTF-8"?>
<flashing>
<header>
<phone_model model="UMTS_SPYDER"/>
<software_version version="umts_spyder-user 2.3.6 6.5.1-167_SPU-15-M2-1-DE 1328517836 release-keysSPYDERBP_U_03.1C.91P"/>
<interfaces>
<interface name="AP"/>
</interfaces>
</header>
<steps interface="AP">
<step operation="flash" partition="mbm" filename="allow-mbmloader-flashing-mbm.bin" MD5="3BD5A466807C6BD4170BA22518C03DA7"/>
<step operation="reboot-bootloader"/>
<step operation="flash" partition="mbmloader" filename="mbmloader.bin" MD5="9D88A534DC24ABB24757BD8C357E82A0"/>
<step operation="flash" partition="mbm" filename="mbm.bin" MD5="E718C75A0163E255C96E0B2A3E32F70C"/>
<step operation="reboot-bootloader"/>
<step operation="erase" partition="cache"/>
<step operation="erase" partition="userdata"/>
<step operation="erase" partition="emstorage"/>

<step operation="flash" partition="logo.bin" filename="logo.bin" MD5="06c07c2970460a4e656a3206859a3617"/>
<step operation="flash" partition="ebr" filename="ebr_signed" MD5="3d655a67765d001a89d73a3dab34d413"/>
<step operation="flash" partition="mbr" filename="mbr_signed" MD5="d45a2d3d3d440fed6840aa1f0188e67e"/>
<step operation="flash" partition="system" filename="system_signed" MD5="8d087c352a7d7c97039d37714de03489"/>
<step operation="flash" partition="emstorage" filename="emstorage.img" MD5="F248FF87BFAB03E3278891AD151ADDE7"/>
<step operation="flash" partition="webtop" filename="webtop_signed" MD5="7ad932b66a7ec9935a93cc3a4b1645b6"/>
<step operation="flash" partition="radio" filename="radio.img" MD5="9a833b62d4f3574dc8b41141f4c5b731"/>
</steps>
</flashing>


Delete these 3 Lines, if you don't want to loose your data!
I prefere an clean install, that's your choice

After flashing with RSD turn off your Device and boot into Recovery via AP Fastboot!

Flash the leaked Update.zip from there and reboot your Device.

Ofcourse there's no Root anymore!

Edit: I've used an Factory Cable for flashing...
The Following 4 Users Say Thank You to HSD-Pilot For This Useful Post: [ View ] Gift HSD-Pilot Ad-Free
13th May 2012, 04:49 PM |#2  
Senior Member
Flag Frankfurt
Thanks Meter: 7,959
 
More
This is perfectly right

But in case of wiping userdata, if you don't want to loose your data, you may delete the lines "erase userdata" and "emstorage". If the phone won't come up, then perform a full wipe.

In most cases it's enough to flash only "system" with RSD.
The Following User Says Thank You to dtrail1 For This Useful Post: [ View ] Gift dtrail1 Ad-Free
13th May 2012, 11:54 PM |#3  
whirleyes's Avatar
Retired Recognized Developer
Thanks Meter: 1,856
 
More
RSD isn't the only solution!! yes, RSD is easy to solve your problem but sometimes there is another way.

If you have install the bootstrap, there is a big chance to revive your phone without RSD & you will not lose root. But now, it's too late.
13th May 2012, 11:59 PM |#4  
Senior Member
Flag Yangon, Myanmar
Thanks Meter: 183
 
More
i got error on RDS lite Status 6/18.

Failed flashing process. Failed flashing process. 6/18 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL.;phone connected

I wiped full data/factory reset before I follow your method
14th May 2012, 12:05 AM |#5  
HSD-Pilot's Avatar
OP Senior Member
Flag NRW
Thanks Meter: 2,483
 
More
LOOK @ the XML I've posted. You have to delete the Lines, that give you failures.

BTW: I've tried to restore my Nandroid of this Leak via CWM. But only get the Error restoring System. I got 2 Nandroid-Backups on my SD. One clean, right after flashed the Leak and one complete Setup'd. But both of them wouldn't work.

Gesendet von meinem XT910 mit Tapatalk 2
14th May 2012, 12:07 AM |#6  
Senior Member
Flag Yangon, Myanmar
Thanks Meter: 183
 
More
Yes, i DELETED two line as you posted.

It doesn't work for me.
14th May 2012, 12:08 AM |#7  
Senior Member
Flag Frankfurt
Thanks Meter: 7,959
 
More
Quote:
Originally Posted by HSD-Pilot

Ok Guys,

after playing a little bit with my Razr running the T-Mobile ICS Leak i got it finaly bricked

< CRACKFLASHER

Don't ask how i did this, that doesn't matter

I tryed to restore my Backup that i did before in CWM, but get an Error restoring the System.
So my only way back to an working Phone was RSD an here I'm.

I'll post you my .XML-File for the T-Mobile 2.3.6, so maybe you can do it the same way.


<flashing>
<header>
<phone_model model="UMTS_SPYDER"/>
<software_version version="umts_spyder-user 2.3.6 6.5.1-167_SPU-15-M2-1-DE 1328517836 release-keysSPYDERBP_U_03.1C.91P"/>
<interfaces>
<interface name="AP"/>
</interfaces>
</header>
<steps interface="AP">
<step operation="flash" partition="mbm" filename="allow-mbmloader-flashing-mbm.bin" MD5="3BD5A466807C6BD4170BA22518C03DA7"/>
<step operation="reboot-bootloader"/>
<step operation="flash" partition="mbmloader" filename="mbmloader.bin" MD5="9D88A534DC24ABB24757BD8C357E82A0"/>
<step operation="flash" partition="mbm" filename="mbm.bin" MD5="E718C75A0163E255C96E0B2A3E32F70C"/>
<step operation="reboot-bootloader"/>
<step operation="erase" partition="cache"/>
<step operation="erase" partition="userdata"/> Delete these 2 Lines, if you don't want to loose your data!
<step operation="erase" partition="emstorage"/>
I prefere an clean install, that's your choice
<step operation="flash" partition="logo.bin" filename="logo.bin" MD5="06c07c2970460a4e656a3206859a3617"/>
<step operation="flash" partition="ebr" filename="ebr_signed" MD5="3d655a67765d001a89d73a3dab34d413"/>
<step operation="flash" partition="mbr" filename="mbr_signed" MD5="d45a2d3d3d440fed6840aa1f0188e67e"/>
<step operation="flash" partition="system" filename="system_signed" MD5="8d087c352a7d7c97039d37714de03489"/>
<step operation="flash" partition="emstorage" filename="emstorage.img" MD5="F248FF87BFAB03E3278891AD151ADDE7"/>
<step operation="flash" partition="webtop" filename="webtop_signed" MD5="7ad932b66a7ec9935a93cc3a4b1645b6"/>
<step operation="flash" partition="radio" filename="radio.img" MD5="9a833b62d4f3574dc8b41141f4c5b731"/>
</steps>
</flashing>


After flashing with RSD the Phone boots into Recovery, as you know.

Flash the Update.zip from there and reboot your Device.

Ofcourse there's no Root anymore!

Edit: I've used an Factory Cable for flashing...


Also the this line "<step operation="flash" partition="emstorage" filename="emstorage.img" has to be deleted, if you want to retain your data.

---------- Post added at 01:08 AM ---------- Previous post was at 01:07 AM ----------

Quote:
Originally Posted by kenosis

Yes, i DELETED two line as you posted.

It doesn't work for me.

You have to delete the following lines: cdt.bin, devtree, cdrom, boot, recovery. And as I can see in your post you didn't delete the line cdt.bin! Please a bit more attention next time..
The Following User Says Thank You to dtrail1 For This Useful Post: [ View ] Gift dtrail1 Ad-Free
14th May 2012, 12:11 AM |#8  
HSD-Pilot's Avatar
OP Senior Member
Flag NRW
Thanks Meter: 2,483
 
More
Not just the two lines.

LOOK @ your XML and then @ mine. There's no cdt.bin in mine.

Maybe just copy and paste


Gesendet von meinem XT910 mit Tapatalk 2
14th May 2012, 12:12 AM |#9  
Senior Member
Flag Frankfurt
Thanks Meter: 7,959
 
More
Quote:
Originally Posted by HSD-Pilot

Not just the two lines.

LOOK @ your XML and then @ mine. There's no cdt.bin in mine.

Maybe just copy and paste


Gesendet von meinem XT910 mit Tapatalk 2

@HSD-Pilot: Don't forget the third line, read above
17th May 2012, 12:43 PM |#10  
Senior Member
Flag Cinisello Balsamo
Thanks Meter: 21
 
Donate to Me
More
I have followed the guide but screen turns BLACK after MOTO logo and shows nothing. I have tried to boot with hw diag, bp tools but wo success..
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes