i tried the adb way but i get that error too, so i did fastboot way and it worked fine. try fastboot instead, same thing really nothing difficult with either technique.
I would but i don't have an engineering spl.... :/
can't i use terminal on my phone instead?
Yes, copy the recovery.img to your sdcard. Boot up your phone, open up better terminal and type
Code:
$su
#flash_image recovery /sdcard/recovery-RA-magic-v1.2.3G.img
or if you have 32A device
#flash_image recovery /sdcard/recovery-RA-magic-v1.2.3H.img
i get that too when trying to upgrade. just continue with the next step and it still works. on 1.2.3H now already.
on another note :
Do i still need the ext3 partition when i want to use the switchrom script from this recovery?
Last edited:
I am thinking of updating but I had an issue that might affect me updating, I posted it in another thread but did not get a reply back.
I changed my SPL to a engineering one that someone suggested I used since they too had a MyTouch. I changed the spl and this is what it says.
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
So although it is a google branded one MyTouch3G I am not sure what to use anymore since there is a H at the end of S-OFF H, before I changed the SPL it did say G.
Phone is running fine so far but now I am not sure what I should be installing and what I should not. Should I try the G or the H version of the new Recovery?
I changed my SPL to a engineering one that someone suggested I used since they too had a MyTouch. I changed the spl and this is what it says.
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2005 (SAPP30000)
CPLD-10
RADIO-2.22.19.26I
So although it is a google branded one MyTouch3G I am not sure what to use anymore since there is a H at the end of S-OFF H, before I changed the SPL it did say G.
Phone is running fine so far but now I am not sure what I should be installing and what I should not. Should I try the G or the H version of the new Recovery?
i think you still go for the G version of the recovery as your board is still a 32B.
Hey Amon, quick question. I have a 16 GB class 6 transcend sd card. When I use parted using your recovery, I always get 202 MB of swap. Any ideas as to why it's so big?
hypmatize: I read somewhere (in this thread I think) before that the error is normal, just proceed on, as str4vag has stated. I personally did the fastboot way for this release though.
Thanks for the info wysie ill try that method next update. as for fastboot i can't really use it unless i change my spl... the terminal method worked perfectly tho.
just a question to confirm an issue
anyone else not getting any responce from their accelerometer after updating the recovery?
i know recovery has nothing to do with the accelerometer. but just curious. mine stopped working. i noticed it a few hours after updating recovery.
So i thought i might give it a shot and ask here since i have not done any other updates since the recovery.
anyone else not getting any responce from their accelerometer after updating the recovery?
i know recovery has nothing to do with the accelerometer. but just curious. mine stopped working. i noticed it a few hours after updating recovery.
So i thought i might give it a shot and ask here since i have not done any other updates since the recovery.
I am basically in the same situation as you are (see signature).
I am planning to upgrade my recovery tonight, I am going to take the G version, worked for me for 1.2.1.
str4vag: No issues here. The recovery happens to have a auto-rotate fix though. Haha, the irony
hmm..that might work..i totally missed that..lol..
thanks for pointing it out
will update if it actually fixes my problem.
nope, still does not rotate.
things that are borken because of the issues are :
1. abduction: World Attack (my poor jumping cow)
2. compass app
3. Gps Status
edit 2:
wipe, reflash and still not working.
Last edited:
USING fastboot TO FLASH THE NEW RECOVERY.
but i get this error
"failed remote:signature verify fail"
any idea????
but i get this error
"failed remote:signature verify fail"
any idea????
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
13This is a custom recovery based on Cyanogen's recovery source with a lot of things added by me. The purpose of this recovery is to avoid using adb by accessing all features directly from the menu.
All source code is available at github.
This recovery if for the HTC Magic/MT3G only, if you have an :
- HTC Dream/G1 you should go here.
- HTC Hero you should go here.
- HTC Sprint Hero you should go here.
- HTC Eris you should go here.
- HTC Tattoo you should go here.
- HTC Nexus One you should go here.
Important notes
- 32A users with SPL 1.76.x should flash the Hero version! (Will be updated to v1.7.0 soon!!)
- Always check recovery.log before posting your issues!
You can do this by doing :- "cat /tmp/recovery.log" OR "cat /cache/recovery/log" right after you had the issue.
- Use the "move log to sd" option in the "others" menu right after you had the issue. This will move the log to /sdcard/recovery.log so you can easily open it with a text editor.
Features
Use the trackball (up+down) to navigate through the menu, press the trackball to select items.
You can also use the volume keys (vol-up + vol-down) to navigate, and the CALL-ANSWER key to select items (in case your trackball is broken).
- full ADB access in recovery mode
- Busybox v1.15.3
- HW-Key navigation (volume keys + CALL-ANSWER) option
- Extended menu (with keyboard-shortcuts):
- Reboot system now :: reboot your phone
- USB-MS Toggle :: enable/disable USB mass storage (use when the phone is connected to your PC)
- Backup/Restore (recovery partition not included!)
- Nand backup :: Make a Nand backup
- Nand + ext backup :: Make a Nand + ext backup
- Nand restore :: Restore a Nand backup
- BART backup :: Make a BART backup (Nand + ext)
- BART restore :: Restore latest BART backup
- Bck Google files :: Makes a backup of the Google proprietary system files in /cache/google
- Rst Google files :: Restores the Google proprietary system files from /cache/google
- Flash zip from sdcard :: Flash a zip update file from your sdcard
- Wipe
- Wipe data/factory reset :: Wipe /data and /cache
- Wipe cache :: Wipe /cache only
- Wipe Dalvik-cache :: Wipe /cache/dalvik-cache
- Wipe SD:ext partition : Wipe the ext partition on your sdcard
- Wipe battery stats : Wipe the battery stats in /data
- Wipe rotate settings : Wipe the sensor settings in /data
- Partition sdcard
- Partition SD :: Interactive SD partitioning
- Repair SD:ext :: Repair the ext partition
- SD:ext2 to ext3 :: Convert ext2 to ext3
- SD:ext3 to ext4 :: Convert ext3 to ext4
- Other
- Fix apk uid mismatches :: Does extacly that
- Move recovery.log to SD :: Moves the recovery log file to your sdcard. (Use when you want more detailed recovery log information)
- Power off :: Powers off your phone
- Scripts available via adb :
- Nandroid v2.2.1 : enter "nandroid-mobile.sh" to start.
- BART v1.3.1 (Backup and Restore Tool) : enter "utility" or "u" to start.
- switchrom.sh V1.1 : enter "switchrom" to start.
- sdparted v0.6 : enter "sdparted" to start.
Install
- There are several ways to install a custom recovery, choose the one that suits you most (I probably forgot a few).
- You don't need to enter "mount -a" if your partitions are already mounted.
- Use the H/G version if your Magic is HTC branded (PVT 32A board)/Google branded (PVT 32B board).
via fastboot :
- Requires engineerings SPL!
Code:Copy recovery-RA-sapphire-v1.7.0G.img to a location where fastboot can find it. Boot your G1 into fastboot mode (boot while holding BACK) Connect your G1 via usb to your pc/mac/... fastboot devices (to make sure that fastboot "sees" your device) fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
via adb :
- Requires a custom recovery (with test-keys) like Cyanogen's v1.4 or my previous recovery
- Do NOT follow these steps from a terminal application on the phone, make sure that you've booted into a custom recovery first!!!
Code:Copy recovery-RA-sapphire-v1.7.0G.img to the root of your sdcard Boot into your current custom recovery (boot while holding HOME) Connect your G1 via usb to your pc/mac/... adb shell #mount -a (this can give back an error if you don't have an ext partition, don't worry about it and just proceed) #flash_image recovery /sdcard/recovery-RA-sapphire-v1.7.0G.img
via terminal application installed on the phone :
- Requires root
[*]DO NOT use this method with CM5.0.7, there are currently some memory issues while flashing, use the above methods (preferably the fastboot method) instead until the issue is fixed in CM5.0.7!
Code:Copy recovery-RA-sapphire-v1.7.0G.img to the root of your sdcard start the terminal app #flash_image recovery /sdcard/recovery-RA-sapphire-v1.7.0G.img
Download
- ALWAYS check the md5sum to make sure the zip isn't corrupted.
- Click on the Mirror-link if you don't like rapidshare
- Use the H/G version if your Magic is HTC branded (PVT 32A board)/Google branded (PVT 32B board).
- recovery-RA-sapphire-v1.7.0G.img - MD5Sum: 8b3b5ff90575eba0c5bfc13c0fa6b8ea
- recovery-RA-sapphire-v1.7.0G-cyan.img - MD5Sum: 8846b53e3184d688e3e8a628ad81074f
- recovery-RA-sapphire-v1.7.0H.img - MD5Sum: f78bc0ff51f233666a9a5f72b56aabec
- recovery-RA-sapphire-v1.7.0H-cyan.img - MD5Sum: 1ed8363e05b3515d7f976a8764cfad51
Change-log :
v1.7.0
Code:- Fixed some minor bugs - Recovery and scripts use /sd-ext instead of /system/sd as mountpoint to support the new apps2sd method (implemented mostly by Chris Soyars) - Added an option to backup/restore Google proprietary Android system files (backuptool.sh written by Cyanogen) - Removed "move apps2sd"-option as it's not needed anymore with the new apps2sd method - Updated BART to v1.3.1 (updated by Dumfuq to support /sd-ext) - Added a wipe cache only option - Nandroid now backups/restores /cache again by default - Dalvik-cache wipes /cache/dalvik-cache now - Removed SDCARD: prefix in output when chosing zip to flash - Added Cyan version (There's no difference with the normal version, only the wallpaper and textcolor changed)
v1.6.2
Code:- Added power off menu item - New unyaffs binary patched by Koushik Dutta and Packetlss to fix the "losing root"-issue and incorrect file-time after a Nandroid restore - New dump_image binary (by Brainaid) patched by Packetlss to fix the "bad blocks"- Nandroid restore issue. [COLOR="Red"][B](This will not fix old corrupted Nandroid backups! Please make new backups!!)[/B][/COLOR] - New mkyaffs2image binary - New flash_image binary - Updated busybox to v1.5.3 - Nandroid menu options will NOT backup or restore recovery, cache, misc, splash1+2 (to avoid issues) - Fixed wipe option not wiping when ext was not present - Created carebear versions after the idea of packetlss - Switched the Nexus logo to a Green Carebear with Nexus One logo (Thanks Montalbert!)
Special thanks to :
- packetlss for all the hours of support and awesome coding skills, THANKS man ^^, donate to Haiti
- Koushik Dutta for the unyaffs binary code fix and help ^^
- pensive for adding awesome features to Nandroid
- Bkmo for his utility script!
- Devsk for his switchrom script!
- 51dusty for his sdparted script!
- k4str0 for his fix_permissions v2.03 update.
- Devsk, Dumfuq, Overground for creating BART
- Androidappcritics for the reboot idea in BART
- rikupw for the ideas and toggle_ums script.
- MLIGN for the idea to port my recovery to the Dream.
- http://theunlockr.com for all the awesome video’s ^^
- JesusFreke for his awesome JFv1.43's recovery , donate
1I think its because the stock spl has signiture checking on. Change the spl though and...1But there says "Only flash recovery-RA-hero-v1.6.2.img if you have a 32A Sapphire with 6.35.x.x radio and 1.76.x SPL, recovery-RA-hero-v1.7.0.1.img will NOT boot! I'll create a new Sapphire version soon."
Thanks.
New posts
-
-
-
-
[ROM][14] PixelExperience 14 BETA for Galaxy S20 Series [AOSP]
- Latest: franklin-albuquerque