one more thing, so the phases are "192-810, 810-1188, 1188-1566" does that mean in the 810-1188 phase the min freq is all the way up to 810MHz now? or are you just showing me what each step leads to and the min is still always 192MHz? Like this:hi, iba
could you please explain what's 4) wipe cache+dalvik
i installed my kernel for badass→balance→cfg is it right?
im going to try the script
Thanks for answering
phase1 192 - 810
phase2 192 - 1188
phase3 192 - 1566
last ordroid 6.1.0 + my script = extra smooth with low power consuption
UI is smooter than the oldest versions
pure fluidity
Sorry, but I got to step 6 but my file browser does not have that option. I tried other one to no avail. Is it necessary or like it was said earlier in the thread was it just reboot twice. Just want to make sure that would implement your script
Sent from my sensational sensation 4g
all scripts need full root to run
if you have conservative on screen on.. that's the issue..
sure, you find it down here
oh.. this is pure stable with huge overclock (i use 1.72 not 1.566).. but i have stability at 1.566 @ 1.050mV.. but.. the power consuption is the same.. and.. at 1.50mV if cpu goes to over 55°C, it freezes.. so.. prefere to level up
SCREEN ON:
- dualcore with all cores TURNED ON (hope you understand now
- governor badass for all of 2 cores
- min freq at 384mhz for all of 2 cores
- max freq at 1.566ghz for all of 2 cores
- first phase freq at 810mhz for bla bla bla
- second phase freq at 1.188ghz for bla bla bla
- third phase freq at 1.566ghz (is the maxfreq)
SCREEN OFF:
- only core0 is TURNED ON
- governor conservative
- minfreq 192mhz
- maxfreq 540mhz
Badass governor has the same configuration as last show's ondemand governor
So, now, with this MOD we have a pure functional dualcore with the advantages of multicore system, with limitate frequency. The stock situation is 384-810mhz, if the single core (is the same, qualcomm uses asyncronic frequency) needs more than 810mhz, it increases the max freq to 1.188ghz (the sensation original frequency), if 1.188 isn't sufficently, it increeses at 1.566
remember, qualcomm has asyncronic frequency, so, one core can be run at 1.56ghz, the other at minimum mhz..
INSTALLATION:
-) flash a kernel witch has badass governor (i advise bricked 1.1) with NO GPU OC and what governor you want, the same for the frequency, mod autochanges those, chose what scheduler you prefer.
1) Flash MOD zip file by recovery
2) Select what MOD YOU want
3) Reboot.
#) You have to reinstall at every Rom Upgrade
# If you want only the UV, select Remove in mod choseing (it's the same as no installing it); you can use the UV mod with all kernels, and all governors
# If you come from V2.0 to 3.0, go to recovery, wipe, format system partition, after that, reinstall rom, reinstall bricked kernel (if it hasn't), reinstall other mods (like battery %), install my mod, reboot.. You will not loose your data
# ONDEMAND VERSION IS NOT FOR GOOD BATTERY CONSUPTION, IF YOU HAVE HUGE BATTERYDRAIN (IT'S WHAT YOU'LL HAVE) INSTALL THE BADASS - BOOST+BOOST VERSION.
DISINSTALLATION:
1) Boot in recovery, flash the Mod
2) Select Remove
3) Reboot
bricked 1.2 -above
V 11.9
> Fixed Screenoff chose
> Changed DEFAULT first phase for better reactive with less power usage
> Other minor changes
###
Added Version for AOSP kernel (NoSense)
V 11.8
> Changed some settings
V 11.7
> Changed some settings for a better fluidity
V 11.6
> Added Remove chose
> Fixed an installation issue of the Aroma
V 11.5
> Added possibility to know if MOD is working, you have to give a cycle on/off of the screen, after that, if it works, you will find a new file in home of sdcard!
V 11
> Changed configuration for less battery drain
V 10.5
> Tweaked badass experience for better battery life (only with bricked kernel 1.4)
V 10.1
> Tweaked screen off conservative
V 10.0
>> BIG RELEASE
> Added possibility to chose frequency
> Added possibility to chose screen off governor
V 1.01
> Fixed freq values in Aroma installer
V 1.0
> Initial Release
