How to ROOT Galaxy Note 10.1 3G/Wifi! [N8000/N8013/N8010]
- Thread starter zedomax
- Start date
Someone would mind to give me a hand to accomplish the rooting. I just followed the video instructions, but after to restart to recovery there is no CMW for my surprise, I get the Android system recovery. Any hint what to do? As you can see I'm a little newbie.
Odin result:
Code:
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)ERR found the solution, it is very simple, read bellow:
https://xdaforums.com/showthread.php?t=1831152&page=64#634
Last edited:
From the old site I linked:
Q: I don’t see ClockworkMod Recovery when I enter recovery, I see stock Android recovery.
A: With newer software updates, you may be encountering this error because it will overwrite ClockworkMod Recovery upon reboot. *To get around this, simply boot into ClockworkMod Recovery right after flashing in ODIN. *You can set auto-reboot off in ODIN then when done, just hold down Power and Volume Down straight to bootloader menu
Yeah, I managed to get it working, thanks. My problem now is that "adb reboot bootloader" just boots normally and if I try boot to bootloader holding power + vol - buttons it doesn't accept any fastboot/adb command there. I need to install TWRP.
Yeh, I don't think that CWM supports ADB (not sure any version does, it's been a long time).
But for sure get TWRP.
https://dl.twrp.me/n8000
https://dl.twrp.me/n801x
Not sue I ever tried to enter recovery with ADB on this device.
But the command is reboot recovery
bot bootloader.
Interesting, in this case how to flash TWRP? o.0
>adb devices
List of devices attached
4107b2a8005f7f67 device
>adb bot bootloader
adb: usage: unknown command bot
>adb reboot bootloader
(just boots normally to Android)
>adb reboot recovery
(CWM recovery GUI, can't flash TWRP from there, right? it is a .img file)
>fastboot command doesn't work at all, stuck in "waiting for any device"
---------- Post added at 01:15 ---------- Previous post was at 00:51 ----------
Oh, problem solved. I just converted TWRP .img to .tar and used Odin software to flash it.
More info:
https://xdaforums.com/note-4/general/convert-twrp-img-to-tar-odineasy-t3355944
https://www.theandroidsoul.com/how-to-install-twrp-recovery-using-odin/
Thanks ST Dog!
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
9
I've been facing this problem myself this week. I found another post about this issue, and followed it, though I can't find it again. But here are the steps
- Before you flash the recovery, uncheck "Auto Reboot" in Odin (or use the --no-reboot switch for heimdall).
- Once it's done flashing, reboot straight into recovery by holding the volume up (farthest from power) and the power button (all while the "download" screen is still up).
- Release the power button when the splash screen comes up, but continue holding the volume button.
- Release the volume button once the recovery comes up.
This was very frustrating for me before I came across that post. I think I installed CMW or TWRP a total of 10 times before I found the fix.7
Just follow the below steps :
if you are still getting the stock recovery 3e follow these steps :
1. When flashing CWM through odin untick the "Auto Reboot" option within Odin.
2. Flash CWM.
3. When done , press power & volume up ( the one apart from power button ) until the Samsung logo appears, then leave both buttons.
4. CWM will appear.
5. Choose "Reboot System now "
6. You will get a new screen with an option mentioning something like " disable flash recovery , press it & reboot.
7. Now if you get back to pressing power & volume up you will have a permanent CWM.
Then you can install root through CWM.
