[Android] Eclair on Kaiser/Vogue/Polaris -- polymod 2.1g Full Market Update 23 Mar!!

Search This thread

Mr-PaLui

New member
Feb 9, 2011
2
0
I want to upgrade HTC TyTN II to the android.
to which version is stable and let all the features work?
 

idumych

Senior Member
Oct 31, 2009
266
29
Seattle, WA
I would suggest myn's warm doughnut. I don't have a tilt anymore but that was my go to rom. Stable and beautiful.

Sent from my SPH-P100 using XDA App
 

Kiamichi

New member
Jan 31, 2009
3
0
Brunswick Co, NC
Vogue in a continues loop from linux install

How do I get it to stop. Put everything on my SD card and hit hariet. Did fine then later on restarted it and it's running a continuous loop. It won't connect to ActiveSync anymore. If I restart it then the penguin appears and the loop starts. How do I get back to square one.
 

Schuim

New member
Oct 30, 2010
1
0
Stuck

When installing in NAND on my Kaiser, the installer just hang with the following error:

Mounting /data/sysfiles on /smode

And somthing else but the text is out of the screen.

End error: (can't read all)

ANDROID 5.86111
... init: unable to open persistent proper..
... ly directory /data/property errno: 2

After rebooting, its trying to reinstal but same problem.

Now I can't get in the mobile with USB or enything else.
It's just reinstalling over and over.

Please help, srry for bad english.
It's late @ the moment :eek:

Regards
 

daedric

Senior Member
Dec 24, 2006
2,258
468
Porto
When installing in NAND on my Kaiser, the installer just hang with the following error:

Mounting /data/sysfiles on /smode

And somthing else but the text is out of the screen.

End error: (can't read all)

ANDROID 5.86111
... init: unable to open persistent proper..
... ly directory /data/property errno: 2

After rebooting, its trying to reinstal but same problem.

Now I can't get in the mobile with USB or enything else.
It's just reinstalling over and over.

Please help, srry for bad english.
It's late @ the moment :eek:

Regards

Why are you trying an eclair rom ? It's simply outdated...
 

kranthideep

New member
Dec 21, 2010
1
0
polymod 2.1g in 8925 mic not working

hi friends i have installed the polymod 2.1g on "ATT Tilt 8925" its powers up the display and functioning is all proper except for the mic dosent work i have another "ATT Tilt 8925" phone so i swapped the mic in both the phones just to rule out any hardware failure but i still have this issue i tried using myn's warm donut but i still have the same issue mic not functional can any one help me please


and
Why are you trying an eclair rom ? It's simply outdated...

could you please suggest a better version that is stable and faster on an "ATT Tilt 8925" and how much can i overclock the phone without hurting the phone


thank you
kranthi
 

n2rjt

Senior Member
In my opinion, Froyo is best for this phone. Look for that or Gingerbread.
Best way to overclock is to use Rogue Tools from the market.
You can overclock with atools, but we tend to get more stability if we let the phone boot at normal speed and then overclock after boot. Rogue Tools does that.
I used to overclock to 520 MHz. It runs fast but runs hot and eats the battery. Now I use 400 MHz (the normal speed) for very good battery life.
I use Fresh Froyo which can be found under the HTC Vogue but also runs on our phone. See my signature for links.
 
  • Like
Reactions: kljoki and jondendy

notimportantali

New member
Feb 24, 2013
1
0
hey all...

hello! i have tytn2 kaiser. can i use this on my sdcard? if answer yes, can you explain how? i tried all the ways i read, searched it in a lot of posts, topics, but there is not a useful information. ive been try atools but doesnt work for me... i try warm donut and done updates it works good but that is not what i need, i need a froyo 2.2 on my sd-card... please someone help me on this topic... shortly HELP MEE!!

---------- Post added at 04:55 PM ---------- Previous post was at 04:43 PM ----------

In my opinion, Froyo is best for this phone. Look for that or Gingerbread.
Best way to overclock is to use Rogue Tools from the market.
You can overclock with atools, but we tend to get more stability if we let the phone boot at normal speed and then overclock after boot. Rogue Tools does that.
I used to overclock to 520 MHz. It runs fast but runs hot and eats the battery. Now I use 400 MHz (the normal speed) for very good battery life.
I use Fresh Froyo which can be found under the HTC Vogue but also runs on our phone. See my signature for links.

hi. can you explain how to install froyo 2.2... on my sd card? i really need help.i searched a lot of really but still cant understand... warm donut works, froyo doesnt...
 

Dark-Side

Senior Member
Jan 17, 2009
87
10
hello! i have tytn2 kaiser. can i use this on my sdcard? if answer yes, can you explain how? i tried all the ways i read, searched it in a lot of posts, topics, but there is not a useful information. ive been try atools but doesnt work for me... i try warm donut and done updates it works good but that is not what i need, i need a froyo 2.2 on my sd-card... please someone help me on this topic... shortly HELP MEE!!

---------- Post added at 04:55 PM ---------- Previous post was at 04:43 PM ----------



hi. can you explain how to install froyo 2.2... on my sd card? i really need help.i searched a lot of really but still cant understand... warm donut works, froyo doesnt...
Your zImage seems to be wrong. Do it yourself for froyo: http://xdaforums.com/showthread.php?t=692919 or Atools
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    android by polyrhythmic:
    Eclair 2.1 for Kaiser/Vogue/Polaris -- polymod 2.1 gamma [Based on OpenEclair 1.2.2 (XDA thread)]

    Now available in TWO shades:
    Light
    polymod_2.1a-far_left_screen.png
    polymod_2.1a-taskbar.png
    polymod_2.1a-home.png
    polymod_2.1a-right_two_screens.png


    polymod_2.1a-tray.png
    polymod_2.1a-weather.png
    polymod_2.1g-neocore.png
    polymod_2.1a-locked.png


    and Dark
    polymod_2.1g-dark-home.png
    polymod_2.1g-dark-notifications.png
    polymod_2.1g-dark-contacts.png
    polymod_2.1g-dark-QVGAincall.png


    polymod_2.1g-dark-tray.png
    polymod_2.1g-dark-browser.png
    polymod_2.1g-GPSworking.png
    polymod_2.1g-dark-power.png



    BOTH themes have updated Desire settings icons and QVGA dialer:
    polymod_2.1g-settings.png
    polymod_2.1g-dark-dialer.png



    OpenEclair is a community ROM based on the AOSP 2.1 source code (with lots of Cyanogen mixed in).

    The goal of OpenEclair is to bring to the community a fast and stable Eclair 2.1 ROM, with contributions from numerous ROM developers.

    A few things to look forward to in this build:
    • OpenGL Hardware Acceleration! (thanks again to the amazing dzo!)
    • Much improved battery life
    • Working autocomplete (for Spanish and English) touch keyboard
    • Working Google Voice and Maps 4.0 with Full Nav (or int'l Maps 4.0 with Nav)
    • GPS with AGPS (Network "Cell-Tower" Location reported buggy for some users)
    • 5 home screens and Full QVGA Compatibility
    • Stability. The OpenEclair base is the most stable yet :)
    • New install system (which means easier upgrading and multiple themes in the future!)

    Thanks to all devs who have made this possible! zenulator, dzo, vilord, srwalter, mssmison, manup456, enatefox, jnadke, wesgarner, ctso, zapote21, bcrook, JAguirre1231 to name a few ;)
    I'd also like to thank Android Framework Engineer Dianne Hackborn , the many reponses to devs' questions she has left all over the net have taught me tons about Android.


    A huge THANKS to those who have already donated!!!
    Pandemic187, manu33xtro, kevinddavis, Robert H., Chui M., Dermot M., Jake Y., S Suresh K., Michael W., Rafael R., Edward C., Steven H., Stephen P., Dirk L., Adam P., Mile V., Leann M., Dave W., anonymous, Steve R., Avi R., Sebastian C., crymzyn, aikeru, Fiddelm3742, Steven T., Morten M., kendav911, James B., Peter V., and Stefan P. :)
    Also much gratitude to ponack for providing free hosting!



    UPDATE 10 Feb 2010:
    polymod 2.1a released!
    Based on OpenEclair 2.1, this should be the most stable base going forward.
    Install process changed.

    UPDATE 11 Feb 2010:
    polymod 2.1 alpha 2 package with working OpenGL now released!!!

    UPDATE 12 Feb 2010:
    polymod 2.1 alpha 3 package with working init and compache now released! Major speed improvements!!
    2.1a3 changelog:
    • Some improvements from OpenEclair 1.1.5 added
    • Fixed init scripts
    • No more hot wifi! Better wifi power settings!
    • Fixed missing hw3d driver (sorry y'all!)
    • Compcache added (ram swap only, no backing or disk swap, at least for now)
    • Custom userinit.conf supported for power users :) (just copy /system/etc/userinit.conf to andboot folder on your sdcard and tweak to your liking)
    • Additional polymod alpha 3 Release Notes

    UPDATE 15 Feb 2010:
    polymod 2.1 alpha 4 now released! Much easier install process for NAND/ext2/fat32 install. More bugfixes.
    2.1a4 changelog
    • no more switching default.txt/kernel! Installer and 3d now both in one kernel.
    • NAND now supported too!
    • Installer will prompt you! Press and hold d-pad center to launch installer.
    • Improved tiwlan.ini settings
    • Facebook full sync working
    • AndroidApps app install now working
    • /andboot/userinit.d folder now supported for multiple init scripts
    • app structure changed for NAND-compatibility
    • Run less services - Corporate Calendar (MotoCal) & bluetooth now uninstallable
    Also, custom splash screen for Kaiser! (I don't have the files to build this for Vogue or Polaris)
    androidsplash.png

    [ Download Here ]

    UPDATE 19 Feb 2010:
    Displayfix update released

    UPDATE 20 Feb 2010:
    There have been some minor kernel updates. Please get the latest .nbh from KaiserEclair folder or kernel zImage-Eclair from http://sourceforge.net/projects/androidhtc/files/.

    UPDATE 23 Feb 2010:
    polymod 2.1 beta now released!
    2.1b changelog
    • All possible apps png-optimized for less memory use and speed
    • Compcache settings optimized for faster app loading and switching
    • Phone app (and others) reprioritized to improve responsiveness
    • Java (JBed) fully working! (Tested with the latest Opera Mini 4.2)
    • Apps separated for NAND-compatibility and uninstallability
    • Smooth Animation and working 3D
    • Media folder includes a couple Drum n' Bass ringtones and original Sonic the Hedgehog notification sounds ;)
    • Other minor updates/bugfixes
    • New sourceforge kernel has vastly-improved installer (credit goes to dzo, vilord, mssmison, and more)

    UPDATE 4 Mar 2010:
    polymod 2.1 gamma now released! This is a major update!
    THIS IS A FULL-WIPE BUILD. SYSTEM and DATA MUST BE WIPED FOR INSTALLATION.
    2.1g changelog
    • Upgraded base to OpenEclair 1.2.2 -- faster apps, less bugs
    • Better memory management -- compcache & swap turned off by default
    • More apps are uninstallable
    • Regular Maps is included (but is uninstallable)
    • Updated Facebook app (uninstallable)
    • GPS is more stable; GPSTest is working and included (and uninstallable)
    • Dialer customized and recompiled from source for QVGA
    • Phone & incoming calls are more responsive
    • Colored Settings icons from the Desire
    • Lockscreen: No more menu-to-unlock, slide to unlock only
    • Light theme includes 'Bounce' animations
    • Dark theme available, more themed than before, includes custom "Super D" animations
    • Many Live Wallpapers are working, including Grass, Bezier, Bobs, Polar Clock
    • CLI Editor nano now included (use OK button for CTRL, Fn + Left Softkey for pipe)
    • Miscellaneous bugfixes

    UPDATE 15 Mar 2010:
    polymod 2.1 g BT Update now released + .NBHs for Polaris!!
    • BT Audio routing and PAN Networking does not work properly yet on Eclair! You can pair with devices, and send files, but if you attempt to make a call with BT audio, you'll probably end up with no sound and will have to reboot to fix it. However, we will likely fix that soon, and you'll only have to update your kernel.
    • You can again thank dzo (Donation Link) for coding the fix, and also thank fellow xda member Mr. PaveL for tirelessly building and testing .NBHs with me while dzo updated.
    • The only other noticeable updates this kernel provides is soft-reset support for Kaiser and working speakerphone -- so if you don't need these features and polymod is already working well for you, there is no need to update!
    Grab the polymod_2.1g-BT_Update.zip and the zImage or .NBH for your Kaiser or Polaris from the polymod @ ponack repository. Place androidupdate.tar from the zip in your /andboot/ folder, replace your zImage or flash your .NBH, and use the installer to update the system.


    UPDATE 18 Mar 2010:
    polymod 2.1 g WiFi Power Level Updates released!
    Head over to http://ponack.net/poly/WiFi , and get .zips for Low, Medium, High, and Over 9000 WiFi Power Levels. Each .zip contains an androidupdate.tar, place it in your andboot folder and use the installer to update!


    UPDATE 19 Mar 2010:
    Latest .NBHs and Kernel for Kaiser & Polaris posted to http://ponack.net/poly/BT_Update/ , thanks again to Mr PaveL for building them.
    If you're using HaRET, the same zImage now works for Donut AND Eclair. For Eclair you will need to add hw3d.version=1 to the command line in your default.txt . If the previous BT zImage wasn't working for you, this one should. (New Vogue .nbh and the same kernel can be found @ dzo's site.)

    UPDATE 23 Mar 2010:
    Full Market update released!
    Use the installer to apply the update, and then 'fix permissions'.
    http://ponack.net/poly/2.1g/polymod_2.1g-Full_Market_Update.zip

    SD install:
    Download the latest basefiles (haretinstall.zip) from SourceForge
    Make sure to use the correct default.txt for your device. The default.txt must also point to zimage-eclair instead of zimage.
    If you want to partition, you will need your partitions to be:
    1: FAT32 (at least 512MB, to be safe) / 2: EXT2 (256MB) / 3: ext2 (256MB)
    Warning: Partitioning your SD card successfully can be difficult, I recommend using Linux.

    NAND install:
    This is an beta build! I am not responsible if you brick your phone or a tornado lands in your yard due to flashing to NAND!
    How to flash a ROM for Kaiser
    Download the latest .nbh from SourceForge -- Make sure to use the kaisereclair / polariseclair / vogueeclair variant

    The polymod package:
    [ DOWNLOAD Eclair polymod 2.1g Light-Themed for SD install or NAND ]
    [ DOWNLOAD Eclair polymod 2.1g Dark-Themed for SD install or NAND ]
    [ DOWNLOAD OptionalApps.zip ]

    [ Link to the background wallpaper ]

    Installation Instructions:
    • Place the androidinstall.tgz from polymod_2.1g.zip in your /andboot folder on your SDcard. Hold dpad-center when prompted during boot to install.
    • Let the system boot, and don't do anything but go through the setup wizard pressing skip. Don't sync accounts, or setup data, or set your wallpaper. After skipping through the setup wizard, wait at least 5 minutes, then turn off the device.
    • Now power-on your device (this is a good time to backup, just in case) and after boot you can start setting up your accounts like normal.
    If you do ANYTHING more on the first boot, your data may get corrupted and you may get FC's. I don't know why that problem happens, but I know if you use the above instructions you will end up with a very stable and fast Eclair build.

    Need better instructions? Try reading j101399j's awesome polymod Eclair install guide with images!

    Questions? Don't forget to use the search!! Your question has probably been asked and answered before. Also, here's an Android on Kaiser FAQ


    Please use this build with the latest radio, for Kaiser that is 1.71.09.01. Old radios are not supported.

    What works:
    Normal Sleep/Suspend (not hacked!)
    Calls/Txt
    3G Data/MMS
    Wifi
    Full GPS with AGPS
    Network (Cell-Tower-based) Location (buggy)
    Hardware OpenGLES
    Google Apps
    Google Sync
    Exchange Calendar
    Facebook
    YouTube

    Apps included in this build:
    Live Wallpapers: Grass, Beziers, Bobs, Polar Clock, Visualizations
    Astro File Manager [Free]
    Taskiller Free 1.8.1 (no ads + CUSTOM THEMED TASKBAR WIDGET) [Free]
    Facebook (full sync working)
    Myspace
    Car Home
    Desk Clock [new!]
    YouTube
    Powerbar Widget
    Genie Widget (a.k.a News and Weather app)
    Nav Launcher [Free]
    Tetherbot [Free]
    GPS Test [Free]
    extra terminal tools in bin/xbin: rwsystem, rosystem, nano & more

    Optional Apps (in zipfile):
    Maps (US and Int'l Nav)
    HTC_IME (for 320x480 white soft-keyboard)
    PinyinIME (Chinese soft-keyboard with auto-complete)
    HTC Notes (nice, but always runs in background)
    Amazon mp3
    ConnectBot (latest from Google Code repo)
    Jbed (for Java apps)
    Frozen Bubble
    Jewels
    Solitare
    Gestures Builder

    Not working:
    Bluetooth
    Camera
    Voice Dial/Search/Keyboard
    Speakerphone
    YouTube HQ
    'Reboot'

    TODO:
    • Create full /andboot/ packages for n00bs
    • Create androidupdate.tgz for different WiFi power levels
    • Create androidupdate.tgz to switch animations
    • Test light-to-dark and dark-to-light
    • The 'Cell-Tower' Location bug has been found (fix in progress)
    • Full-Build PNG-Optimization (in progress)
    • Clean up the in-call dialer buttons
    • Improve the music app for QVGA
    • Make menu-to-unlock a Spare Parts option (fix in progress)
    • Camera, Bluetooth, Audio-In, Video Playback (fixes being worked on, volunteers always appreciated)
    • Add Kaiser vendor to OE github
    • Rebuild themed .apks from source

    Skin information & credits:
    * Light Tray Launcher from gChrome by Moonspoon (link)
    * Dark Tray Launcher from Gloss by Moonspoon
    * Dark Theme Colored Notification Icons from Zapote21's Zapmix 0.95
    * Black Notification Bar and Notification Tray Handle from OpenEclair MetaMorph put together by JAguirre1231 (link)
    * custom wallpaper, robot from (link)
    * custom dark-themed taskiller bar
    2
    In my opinion, Froyo is best for this phone. Look for that or Gingerbread.
    Best way to overclock is to use Rogue Tools from the market.
    You can overclock with atools, but we tend to get more stability if we let the phone boot at normal speed and then overclock after boot. Rogue Tools does that.
    I used to overclock to 520 MHz. It runs fast but runs hot and eats the battery. Now I use 400 MHz (the normal speed) for very good battery life.
    I use Fresh Froyo which can be found under the HTC Vogue but also runs on our phone. See my signature for links.
    2
    if someone is wondering it still works in 2021!
    Tried 2.1 on my Vodafone-Branded TyTn II and SD-Card Boot
    1
    How to install this and faq's

    Please do not quote this post, just link to it or only quote parts to save space on this thread

    How to run Polymod’s AWESOME 2.1 Eclare Build and Updates

    ==================================================
    Contents
















    Section 1 - Install
    • Prep/Setup
    • (Option 1) Running HaRET from SD (still have windows and Android)
    • (Option 2) Running from NAND (comming soon)
    • Install via NAND/Flash
    • HaRET Install
    • Install Menu & Install Menu Options
    Section 2- FAQ's and Errors
    1. Failed to reach system.img on SD Card
    2. WHY SO SLOW?!?!?
    3. persistent property ... error 2
    4. Wierd Code [ 15.159744] hc_set_state...
    5. No "Install System" option and crash for EXT2 install
    6. How to change the lcd.Denisty
    7. How to partition your sdcard in Android
    ==================================================
    If you don't find the answer here;
    There is now a wiki: http://www.sandladan.nu/wiki


    Section 1 - Install
    1. Download the latest Eclare build from the 1st post and
    For Nand, also download the nbh for your device
    For HaRET, also download the HaRET base files


    The files are in this area on the 1st post (links disabled)
    SD install:
    Download the latest basefiles (haretinstall.zip) from SourceForge
    If you want to partition, you will need your partitions to be:
    1: FAT32 (at least 512MB, to be safe) / 2: EXT2 (256MB) / 3: ext2 (256MB)
    Warning: Partitioning your SD card successfully can be difficult, I recommend using Linux.

    NAND install:
    This is an beta build! I am not responsible if you brick your phone or a tornado lands in your yard due to flashing to NAND!
    How to flash a ROM for Kaiser
    Download the latest .nbh from SourceForge

    The polymod package:
    [ DOWNLOAD Eclair polymod 2.1b for SD install or NAND ]
    [ DOWNLOAD OptionalApps.zip ]

    2. Unzip the files to your PC

    3. Prep Storage Card if you are going to use EXT2 partitions. Make them 260MB each. If they are not that big the installer will crash for some (me included) becasue the system.img and data.img are 256MB in size - See FAQ 7 for partitioning the sdcard in Android

    OPTION 1 - Run from Storage card and still have windows; aka HaRET, continue to step 8 below

    OPTION 2 - Run from NAND (phone memory); this will flash your phone, competly removing windows mobile and only running Android; continue

    NAND Flash/Install
    4(NAND). Select the NBH for your resolution and panel type
    5(NAND). Flash NBH by SD
    6(NAND). Once flash is done pull your battery out for 1-2 minutes
    7(NAND). Put battery back in and start phone
    Continue to step 14
    HaRET/Run from SD
    8(HaRET). Copy the andboot folder from the zip file to your phone’s sdcard (Storage Card)
    9(HaRET). On your phone open file explorer; and select your Storage Card
    image002.jpg

    10(HaRET). Now select the andboot folder

    11(HaRET). Select the default.txt for your phone and rename it to default.txt
    Note if you name it to startup.txt it will make HaRET automatically load

    12(HaRET). Run HaRET

    13(HaRET). Press Run

    image009.png

    14. Press & hold the center button of the D-pad button once the text starts scrolling
    InstallMenu8.jpg


    Here are screen shots of the different versions of the install menu:
    InstallMenu7a-1.jpg





    15. If this is a Fresh Install select you options for Fat32, EXT2 or NAND installation and continue to step 17. If no options come up then the only option is FAT32
    • For install to NAND (you must have flashed nbh for this to work), select install system and data to NAND​
    • For install to EXT2 partitions (HaRET); select system and data on SDCard partition​
    • For install to FAT32 (HaRET); select system and data on EXT2 system.img and EXT2 on data.img (This will not install anything on the EXT2 partitions)​
    16. If this is an update highlight and select the “Install Update”; After you apply the update and get back to the menu select “Fix Permissions(continue to step 15)




    17. Select “yes” to wipe install the system (only on first boot)


    InstallMenu2.jpg

    18. Select “Yes” to wipe your data
    InstallMenu3.jpg

    19. After the system files are installed, you will be back at the menu screen. Select “Quit” to exit


    HaRET will now create the data.img and finish the install and boot

    Section 2 - Errors and FAQ's


    ===============================



    #1 Failed to reach system.img on SD Card



    If you see the error message below:



    Failed to reach system.img on SD Card” then you did not hold the button down correctly. You are seeing this because you missed, disabled or bypassed the install menu.

    ==================================================================

    #2 WHY SO SLOW?!?!?


    Becasue of the Media Scanner. You can stop the Media scanner by opening terminal on your phone and typing the following 2 commands


    su

    killall mediaserver




    ==================================================================
    #3 persistant property ... error 2


    If you receive the following error:

    V O G U E A N D R O I D [some number] init: Unable to open persistant property directory /data/property error: 2​




    Then your data file cannot be mounted


    Use the data.img from the bottom of this post; Reboot, unzip and place the data.img in the /sdcard/andboot folder and start over (yes you will need to reinstall the system)

    This time DO NOT WIPE DATA



    ==================================================================​



    #4 Wierd Code colors or lines on the screen



    If you get color lines, messed up pixels or other wierd display issues, try changing your panel type in nbh or the default.txt​


    ==================================================================​

    #5 No "Install System" option



    If you reach the install menu and the Install System option is not there and you are using EXT2 partitions, or if the EXT2 install fails it is becasue you need to make your partitions bigger, try 260MB+ and try again.

    ==================================================================​





    # 6 How to change the lcd.density


    Method 2:
    From; Niscandia;[...]The way you can do this is [by] changing the /system/build.prop file. There is a setting in there called "ro.sf.lcd_density" I changed that to be the proper density, and it worked just fine. [...] Just remember that you need to remount the /system into read/write mode before updating the build.prop file.
    =====================​


    This will allow you to use 320X480 with an lcd.density of 160; you get all of your apps in market and a screen size that is simular to 240X320​



    1. Open terminal and type the following commands:​

    su

    mount -o remount,rw /system
    cp /system/build.prop /sdcard/build.prop
    mount -o remount,ro /system
    exit
    2. Exit terminal
    3. With Astro or Estrong navigate to the file (copied to your sdcard) and edit the ro.sf.lcd_density value
    4. Save the file.
    5. Go back into terminal and type the following:
    su
    mount -o remount,rw /system
    cp /sdcard/build.prop /system/build.prop
    mount -o remount,ro /system





    exit
    6. Reboot phone and you lcd.density will be changed​


    # 7 WiFi is not working

    If WiFi is not working try applying the update in this post:
    http://xdaforums.com/showthread.php?p=5670646#post5670646