FORUMS
Remove All Ads from XDA
Post Reply Email Thread
this is a cheap watch, do NOT expect support from the manufacturer

there is also a cloned version, sold as a real u8, no way to tell the difference until you receive it

DO NOT FLASH YOU WATCH!

it might be a clone and render it USELESS

CONS:
-there will never be apps developed for it
-you have to have phone or media audio sent to the watch, otherwise it can't connect
-crappy rubber band, attracts dust likecrazy
-the watch screen is off when in standby, so you have to press the button to see anything
-call quality through it's sucks, both microphone and speaker
-display is unreadable outdoors
-NO support from manufacturer
-NO central location for firmware updates
-NO decent companion app, only generic notifications, no filter possible, only based per app

PROS:
-cheap
-doesn't look too bad

stay away is my advice
The Following User Says Thank You to JarlSX For This Useful Post: [ View ] Gift JarlSX Ad-Free
24th February 2014, 06:52 PM |#2  
zocster's Avatar
Senior Member
Flag Christchurch
Thanks Meter: 35
 
More
interesting, the UI very close to i'm watch, home screen anyway.
2nd April 2014, 12:37 PM |#3  
OP Senior Member
Flag Eindhoven
Thanks Meter: 103
 
More
removed
The Following 3 Users Say Thank You to JarlSX For This Useful Post: [ View ] Gift JarlSX Ad-Free
2nd April 2014, 03:46 PM |#4  
OP Senior Member
Flag Eindhoven
Thanks Meter: 103
 
More
the manufacturer sent me the BTNotifier app, so i've been able to try out some stuff

sadly, all isn't well

the notifier app is very generic, you can make a selection from all your apps, but all that does is show a generic message on the watch, not the content of that message (like "new tweet" but not the tweet itself)

that's the whole reason i have my smartwatch, to see messages at a glance, dismiss whatever is not important and grab my phone when it is

will send feedback to the manufacturer, but am not expecting much...
10th April 2014, 03:50 PM |#5  
fbhtc's Avatar
Member
Flag Lisbon
Thanks Meter: 3
 
More
Hi,

I just bought this model. It seemed beautiful and with many features.

The screen is not in color? In the photos seems to b/w.

The battery can stand how long? The bluethoot not fail?

You are not satisfied with him?

How much was yours? In the link you placed it very very expensive...

Reg,
FB
10th April 2014, 10:44 PM |#6  
OP Senior Member
Flag Eindhoven
Thanks Meter: 103
 
More
the link i shared was for 2 watches, not for 1, what did you pay for it?

yes the screen is color, look at the analog clock face, the seconds hand is red

and no i'm not impressed with this watch

haven't tried it for long, so no idea how long the battery lasts or how stable the bluetooth connection is

it does not have (native) support for facebook/twitter/whatsapp/gmail, something my Sony Smartwatch 2 does have

it does support sms and has a general "catch all" option for any app you choose, but for twitter it will just say "you have a new tweet" and not the message content

the screen is hardly readable outside, i have to admit Sony did a pretty good job with their transflective display

it also times out too quick, dims the screen in about 4,5 seconds and goes totally black after another 5,5 seconds

all notifications, not matter the application, are grouped together and you can't swipe to see them, you have to use the touch buttons at the bottom

if you disable both phone and media audio, the watch disconnects completely, at least one needs to be enabled
15th April 2014, 12:25 PM |#7  
Junior Member
Flag Taipei
Thanks Meter: 7
 
More
Quote:
Originally Posted by JarlSX

Got my watch today...

Language selection is limited to chinese/english, no other options.

Build version of the firmware: M28_KHR.CN1.V007

Will add more info when i know more!
(any questions are welcome)...

I've got the same watch few days ago too,
The initial version of firmware is M28_KHR.CN1.V008
And then, I ask the 2 different versions of firmware from the vendor to see if any new feature or improvement,
The only difference I've found so far is the backlight timeout value can be changed,
Are you interested to take a look?
Attached Files
File Type: zip M28_KHR.FN2.V002.zip - [Click for QR Code] (6.85 MB, 13808 views)
File Type: zip M28_KHR_CN1_V011.zip - [Click for QR Code] (6.96 MB, 12655 views)
File Type: zip MTKUSBdriver_v1.0948.0.zip - [Click for QR Code] (223.0 KB, 15846 views)
File Type: zip FlashTool_v5.1308.00.zip - [Click for QR Code] (6.92 MB, 14258 views)
The Following 3 Users Say Thank You to alexcc59 For This Useful Post: [ View ] Gift alexcc59 Ad-Free
15th April 2014, 05:34 PM |#8  
OP Senior Member
Flag Eindhoven
Thanks Meter: 103
 
More
thanks @alexcc59 for those files!

will have a look, being able to set the screen timeout it the first of many changes this watch needs

did you also get a newer version of BTNotifier?
i have v1.3.21 right now

edit: there's two versions of the firmware? one chinese and one english? or what is the difference?

and how do i get this thing to go into flash mode?
16th April 2014, 06:20 AM |#9  
Junior Member
Flag Taipei
Thanks Meter: 7
 
More
Quote:
Originally Posted by JarlSX

thanks @alexcc59 for those files!

will have a look, being able to set the screen timeout it the first of many changes this watch needs

did you also get a newer version of BTNotifier?
i have v1.3.21 right now

edit: there's two versions of the firmware? one chinese and one english? or what is the difference?

and how do i get this thing to go into flash mode?

Yes, I already got that APK too.
As I tried,
The M28_KHR.FN2.V002 firmware support English, French...ETC, total 13 languages, build date: 2014/4/2,
And the M28_KHR_CN1_V011 firmware only support English & Simplify Chinese, build date: 2014/4/9,
But I don't exactly know what's the difference except language support.
I figured out the flashing procedure by myself,
If you want to try, you can follow the steps below~

1. Install driver.
2. Switch on and connect the watch with standard micro-USB cable.
3. Run the "Flash_tool.exe" as administrator.
4. Loacate the 2 files then press the "Download" button as the attached picture.
5. Swith off the watch then it will start to flash automatically.
6. Do not interrupt the process until it finished.
Attached Thumbnails
Click image for larger version

Name:	ex.jpg
Views:	15026
Size:	161.2 KB
ID:	2689193  
The Following 3 Users Say Thank You to alexcc59 For This Useful Post: [ View ] Gift alexcc59 Ad-Free
7th May 2014, 03:02 PM |#10  
Junior Member
Thanks Meter: 0
 
More
thanks @alexcc59 for those files!
only simplified Chinese and English , can everybody help me where can I find Traditional Chinese firmware !thanks for your help
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes