[EASIEST GUIDE] How to unlocking bootloader

Search This thread

nelikp

Senior Member
Oct 25, 2011
1,125
2,853
lost world
Sory because I don't know where I got this tutorial exactly
but I have to give credit whoever make this tutorial..

THANKS to pollob666 for your great and easy guide..


Here we go,

Step 0: (Must Follow)
A)I am not Responsible if it BRICK YOUR PHONE!!!!:eek:
B)Still intressted??:p
C)U MUST ON STOCK ROM (ORIGINAL ROM FROM SE)
D) Check Manufactoring date/code (behind batery)
11W29 above U better stay away and stop dreamming (i got 4 times hard bricked on 11W38)
11W28 below U can proceed and again I am not Responsible if it BRICK YOUR PHONE!!!!:eek:



Step 1: (Downloads)

A) READ THIS OR U will cry if you skip to read this
B) Download S1tool [UPDATED 13 FEB 2012]
C) Download Unlocker [UPDATED 13 FEB 2012]

Step 2: (Prepare)

A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"

Step 3: (Unlock)

A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.

Step 4: (Verify)

A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help
========================================================================================================
And here to relocking bootloader with easiest step
Shared and prepaired by Black Xperia X8

This is tutorial how to relock bootloader!

1.Step: i-Download S1Tool and ii-Download Flashtool
2.Step:Install FlashTool and Gordon Gate Driver
3.Step: Extract rar with 7zip,Winrar...
4.Step: Disable antivirus and firewall because it can interrupt process
5.Step: Open folder where you extract it

6.Step: Run S1Tool.exe
7.Step: Enable USB Debug and plug USB in PC and Phone
8.Step: Klick restore button
9.Step: Unplug your phone and turn it off
10.Step: Hold back key and plug USB in phone
11.Step: Unplug device and klick identify
12.Step: Hold back key and plug usb last number need to be 28
not 29 if is 28 then you relocked your bootloader or a litle r
 
Last edited:

mpoendi

Senior Member
Dec 26, 2011
161
22
Bandung
Here we go,

Step 0: (Must Follow)
A)I am not Responsible if it BRICK YOUR PHONE!!!!:eek:
B)Still intressted??:p


Step 1: (Downloads)

A) Download Flash Tool : From http://xdaforums.com/showthread.php?t=920746 or http://www.multiupload.com/GYL7A7XQBT
B) Download S1tool : From http://xdaforums.com/show...0&postcount=26
C) Download Unlocker : From http://xdaforums.com/show...77&postcount=3

Step 2: (Prepare)

A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"

Step 3: (Unlock)

A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.

Step 4: (Verify)

A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help

You Are LATE!!! Someone has posted it before you... And the words, sentences is totally familliar.


_____________________________________
XDA app (free) | Xgin v6.1 alfs kernel v6 B-) | Anti-Brick phone :-D | Timescape by mr Froggy Furnetal | 火影四大目
___________________________________
 
  • Like
Reactions: nelikp

daddy_rhon

Senior Member
Nov 2, 2011
425
87
Here we go,

Step 0: (Must Follow)
A)I am not Responsible if it BRICK YOUR PHONE!!!!:eek:
B)Still intressted??:p


Step 1: (Downloads)

A) Download Flash Tool : From http://xdaforums.com/showthread.php?t=920746 or http://www.multiupload.com/GYL7A7XQBT
B) Download S1tool : From http://xdaforums.com/attachment.php?attachmentid=713763 [UPDATED]
C) Download Unlocker : From http://xdaforums.com/attachment.php?attachmentid=715058&d=1315609618 [UPDATED]

Step 2: (Prepare)

A) Unzip all downloaded files
B) Shut Down Phone
C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
D) Look For Line "XXXX SIMLOCK CERTIFICATE"

Step 3: (Unlock)

A) Turn the phone on, Connect it with PC in Debugging mode.
B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
E) Wait...
F) if "Press any key to continue . . ." is found, press any key.

Step 4: (Verify)

A) Shut Down Phone
B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
C) Look For Line RUNNING S1_EROM VER "x8A029"
D) if x is "r" then it is done, Congrats...
E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help[/QUOTE
maybe you forgot to post the purpose of flashtools...
 

supermiki

Member
Sep 10, 2009
17
0
Unlock bootloader

trying to unlock bootloader with ginger dx v21 kernel 2.6.29 but "exec' system/bin/sh' failed:not such file or directory found" same with flashtool 0.6.6. what can I do????
Do I must install stock Kernel???
Thanks
 

nelikp

Senior Member
Oct 25, 2011
1,125
2,853
lost world
trying to unlock bootloader with ginger dx v21 kernel 2.6.29 but "exec' system/bin/sh' failed:not such file or directory found" same with flashtool 0.6.6. what can I do????
Do I must install stock Kernel???
Thanks

not sure what u r talking about...
if u on custom kernel that mean your bootloader unlocked..
I tot u r talking about custom rom, am I rite?
so flash stock rom 1st...
(use SEUS, PCC, or FLASH TOOL)
 
  • Like
Reactions: x8papa

supermiki

Member
Sep 10, 2009
17
0
any program I use Flashtool or msm777 I get the same error message :" system/bin/sh' failed:not such file or directory found" I have a cooked rom GINGER DX V21 an Kernel 2.6.29; if I check with s1toll I always have the High "R" value
Thanks
 

nelikp

Senior Member
Oct 25, 2011
1,125
2,853
lost world
@supermikki
look carefull man...


D) Look For Line "XXXX SIMLOCK CERTIFICATE"

Step 3: (Unlock)

A) Turn the phone on, Connect it with PC in Debugging mode.

B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
C) if XXXX is SEMC then run "msm7227_semc.cmd"
D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"

good luck!
 
  • Like
Reactions: x8papa

supermiki

Member
Sep 10, 2009
17
0
unlock bootloader

Tanks for reply.
I got SEMC but when I run "msm7227_semc.cmd stil I get the message:
system/bin/sh' failed:not such file or directory found
 

nelikp

Senior Member
Oct 25, 2011
1,125
2,853
lost world
ok...I got ya...
flash stock rom....use SEUS, PCC< or flash tool..
go back to stock rom 2.1 update 1 first..
it should be okeh
 
  • Like
Reactions: x8papa

Is-tee

Member
Nov 6, 2011
24
0
I read in another forum, who knew open bootloader with 11w35 without problem. So can i open bootloader with 11w34? Is it safe?
 

supermiki

Member
Sep 10, 2009
17
0
Tanks for reply Nelikp.
Just one more question when you say rom 2.1 you mean original rom or any rom 2.1
tanks
 

nelikp

Senior Member
Oct 25, 2011
1,125
2,853
lost world
I read in another forum, who knew open bootloader with 11w35 without problem. So can i open bootloader with 11w34? Is it safe?

u can try..because mine is 11w38 and I did it then after a few days, I got no network problem..

but u can try and see at the line if XXXis this sorry u can't unlock
but if u still wanna try it...
do it on your risk...
I still want to try it..but after my warranty left for 1 month..
because already sent 5times
I got 3times soft brick 1time no network problem
2 times hardbricked

so what u think?:cool:
 
  • Like
Reactions: x8papa

Is-tee

Member
Nov 6, 2011
24
0
u can try..because mine is 11w38 and I did it then after a few days, I got no network problem..

but u can try and see at the line if XXXis this sorry u can't unlock
but if u still wanna try it...
do it on your risk...
I still want to try it..but after my warranty left for 1 month..
because already sent 5times
I got 3times soft brick 1time no network problem
2 times hardbricked

so what u think?:cool:

Thank you! I can unlock, s1tool wrote SEMC SIMLOCK CERTIFICATE, but i don't wanna brick my phone, if it's not safety!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 28
    Sory because I don't know where I got this tutorial exactly
    but I have to give credit whoever make this tutorial..

    THANKS to pollob666 for your great and easy guide..


    Here we go,

    Step 0: (Must Follow)
    A)I am not Responsible if it BRICK YOUR PHONE!!!!:eek:
    B)Still intressted??:p
    C)U MUST ON STOCK ROM (ORIGINAL ROM FROM SE)
    D) Check Manufactoring date/code (behind batery)
    11W29 above U better stay away and stop dreamming (i got 4 times hard bricked on 11W38)
    11W28 below U can proceed and again I am not Responsible if it BRICK YOUR PHONE!!!!:eek:



    Step 1: (Downloads)

    A) READ THIS OR U will cry if you skip to read this
    B) Download S1tool [UPDATED 13 FEB 2012]
    C) Download Unlocker [UPDATED 13 FEB 2012]

    Step 2: (Prepare)

    A) Unzip all downloaded files
    B) Shut Down Phone
    C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
    D) Look For Line "XXXX SIMLOCK CERTIFICATE"

    Step 3: (Unlock)

    A) Turn the phone on, Connect it with PC in Debugging mode.
    B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
    C) if XXXX is SEMC then run "msm7227_semc.cmd"
    D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
    E) Wait...
    F) if "Press any key to continue . . ." is found, press any key.

    Step 4: (Verify)

    A) Shut Down Phone
    B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
    C) Look For Line RUNNING S1_EROM VER "x8A029"
    D) if x is "r" then it is done, Congrats...
    E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help
    ========================================================================================================
    And here to relocking bootloader with easiest step
    Shared and prepaired by Black Xperia X8

    This is tutorial how to relock bootloader!

    1.Step: i-Download S1Tool and ii-Download Flashtool
    2.Step:Install FlashTool and Gordon Gate Driver
    3.Step: Extract rar with 7zip,Winrar...
    4.Step: Disable antivirus and firewall because it can interrupt process
    5.Step: Open folder where you extract it

    6.Step: Run S1Tool.exe
    7.Step: Enable USB Debug and plug USB in PC and Phone
    8.Step: Klick restore button
    9.Step: Unplug your phone and turn it off
    10.Step: Hold back key and plug USB in phone
    11.Step: Unplug device and klick identify
    12.Step: Hold back key and plug usb last number need to be 28
    not 29 if is 28 then you relocked your bootloader or a litle r
    3
    You Are LATE!!! Someone has posted it before you... And the words, sentences is totally familliar.

    look like some jealous:D
    is ok...just wanna helping each other in case newbies can't find the previous post...
    please open minded...

    we here to helping each other...
    if you feel unconfortable with me dont read this post again...:cool:
    2
    thank you mate it work..
    2
    Here we go,

    Step 0: (Must Follow)
    A)I am not Responsible if it BRICK YOUR PHONE!!!!:eek:
    B)Still intressted??:p


    Step 1: (Downloads)

    A) Download Flash Tool : From http://xdaforums.com/showthread.php?t=920746 or http://www.multiupload.com/GYL7A7XQBT
    B) Download S1tool : From http://xdaforums.com/attachment.php?attachmentid=713763 [UPDATED]
    C) Download Unlocker : From http://xdaforums.com/attachment.php?attachmentid=715058&d=1315609618 [UPDATED]

    Step 2: (Prepare)

    A) Unzip all downloaded files
    B) Shut Down Phone
    C) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
    D) Look For Line "XXXX SIMLOCK CERTIFICATE"

    Step 3: (Unlock)

    A) Turn the phone on, Connect it with PC in Debugging mode.
    B) if XXXX is "NOT RECOGNIZED" then sorry, it can't be unlocked.
    C) if XXXX is SEMC then run "msm7227_semc.cmd"
    D) if "XXXX SIMLOCK CERTIFICATE" was not found then run "msm7227_Setool2.cmd"
    E) Wait...
    F) if "Press any key to continue . . ." is found, press any key.

    Step 4: (Verify)

    A) Shut Down Phone
    B) Open S1tool, Click on DO JOB, Press Back on phone, Connect it to PC.
    C) Look For Line RUNNING S1_EROM VER "x8A029"
    D) if x is "r" then it is done, Congrats...
    E) if x is "R" then Sorry, Do everything again. or Search in the Frorum for Help[/QUOTE
    maybe you forgot to post the purpose of flashtools...
    2
    Yes it can be used on w8 too.:)
    x8 and w8 are same phones just different outer covers.