[APP] Semaphore Manager 2.7.6

Search This thread

alb3rtt

Senior Member
Mar 28, 2011
1,379
756
Melbourne
- I9000: Add max_br_threshold tunable to Auto brightness
- I9000: max_lux tunable up to 4000
- N4: Add LED triggers options
- N4: Add gamma control options
- N4: Add RGB color temperature options
- N4: Add logger option
- touchwake: delay up to 5min
- minor fixes
@stratosk, could you add a setting to set min/max CPU frequency? The one in cm10.1 doesn't stick after reboots for me. It goes to 100 min and 1000 max. I'm not sure if this is a ROM bug or due to the semaphore manager however this option could be use full for users on ROMs like super nexus that don't have an option to set min/max cpu frequency.

Edit: it is a semaphore manager issue. Without semaphore manager or nstools installed, it sticks. with nstools installed it sticks but with semaphore manager installed it doesn't stick...

Sent from my GT-I9000 using xda app-developers app
 
Last edited:

superkoal

Senior Member
Sep 24, 2011
1,026
717
Vienna
@stratosk, could you add a setting to set min/max CPU frequency? The one in cm10.1 doesn't stick after reboots for me. It goes to 100 min and 1000 max. I'm not sure if this is a ROM bug or due to the semaphore manager however this option could be use full for users on ROMs like super nexus that don't have an option to set min/max cpu frequency.

Edit: it is a semaphore manager issue. Without semaphore manager or nstools installed, it sticks. with nstools installed it sticks but with semaphore manager installed it doesn't stick...

Sent from my GT-I9000 using xda app-developers app

Obviously it doesn't stick because semaphore manager sets the values you selected in it's settings and get's started later than the system settings process.

So you can either uninstall semaphore manager or re-apply the settings after every boot atm.
i don't know why you would want to set the min frequency to anything else than 100/200 MHz?
May Frequency can be set via the OC slider in semaphore manager.
 

alb3rtt

Senior Member
Mar 28, 2011
1,379
756
Melbourne
Obviously it doesn't stick because semaphore manager sets the values you selected in it's settings and get's started later than the system settings process.

So you can either uninstall semaphore manager or re-apply the settings after every boot atm.
i don't know why you would want to set the min frequency to anything else than 100/200 MHz?
May Frequency can be set via the OC slider in semaphore manager.

Min frequency at 400 works a lot better for me compared to 100 or 200 and I don't lose much battery life. Also, this feature could be useful for AOSP users who can't set min/max frequency any where else.

Sent from my GT-I9000 using xda app-developers app
 
Last edited:

AusMatt

Senior Member
Nov 7, 2011
176
73
Adelaide
Google Play has version 2.7.6 but this thread is still entitled 2.7.0.

Are you aware of this Stratosk (or has someone hacked you and trojaned Semaphore Manager) ?

Sent from my Nexus 7 using xda premium
 

MasterTB

Senior Member
Jan 10, 2011
787
217
Paraná
No modules?!

disregard, stratosk already responded me in the kernel thread.
Thanks.

(I have downloaded and installed the latest kernel and the semaphore app but I only see the log module, is there any way to see all of them? Or did I have a bad flash?
I see the kernel in the phone info as installed so... help?
This is a question not a complain. Not familiar with the N4 kernel, if it has not the same modules as the other versions a simple no is enough.
Thanks.)
 
Last edited:

deeppans

Senior Member
Oct 11, 2011
175
20
When Semaphore Manager started on PA or ASOPA KitKat, I am getting an error that busybox is not installed.
This doesnot happened when I was using CM 10.2

Stratosk, Where & how to install it?

Thanks in advance
 

Top Liked Posts

  • There are no posts matching your filters.
  • 130
    Semaphore Manager helps you to easily full control all Semaphore kernel features. It's only compatible with Semaphore JB kernel and works on Samsung Galaxy S-I9000, SGH-I897, SGH-T959 on Jelly Bean ROMs. It requires a rooted device, with Semaphore kernel installed.

    sm_preview_1.png
    sm_preview_2.png
    sm_preview_3.png


    Semaphore JB kernel thread in XDA:
    http://xdaforums.com/showthread.php?t=1786220

    Many thanks to arifhn for his many ideas through his application (NSTools)
    Also, thanks to monkeywithbanana for his icon.


    Please consider a small donation if you find this application useful, to help development.


    Changelog
    2.7.6 (12/05/2013)
    - N4: Add tunables for updated interactive governor
    - N4: Add SD read ahead option
    - N4: Add "Wireless online" to available triggers
    - I9000: max_lux up to 6000

    2.7.0 (09/05/2013)
    - I9000: Add max_br_threshold tunable to Auto brightness
    - I9000: max_lux tunable up to 4000
    - N4: Add LED triggers options
    - N4: Add gamma control options
    - N4: Add RGB color temperature options
    - N4: Add logger option
    - touchwake: delay up to 5min
    - minor fixes

    2.6.0 (26/04/2013)
    - N4: add touchscreen accuracy and jitter filter control
    - N4: add option to disable touchwake during calls
    - SGS: add UHID module
    - minor fixes

    2.5.0 (23/04/2013)
    - add support for LG Nexus 4
    - minor fixes

    2.3.0 (24/02/2013)
    - add ondemand tunables early_demand, grad_up_threshold
    - add interactive tunable target_loads
    - add module USB_HID
    - couple of bug fixes

    2.2.7 (08/01/2013)
    - option to select BLN or CM LED (Semaphore 2.9.4)
    - bug fixes

    2.2.6 (06/01/2013)
    - possibly fix applying settings after boot issue
    - added available memory in info tab

    2.2.5 (30/12/2012)
    - support for Semaphore JB 2.9.0 kernel
    - interactive governor new tunables
    - ROW IO scheduler

    2.2.1 (08/12/2012)
    - SAI service: a tiny improvement in "Pick up" phone functionality.
    - fix application of smooth ui in smartass governor

    2.2.0 (16/11/2012)
    - SAI service: "Pick up" phone functionality. Just pick up the phone, to answer incoming call without touch the screen (you have to place the phone near to your ear).
    - SAI service: blink LEDs on incoming call

    2.0.0 (09/11/2012)
    - Support for Custom Voltage
    - Introduced SAI service (a service that will be used for automated functions)
    - SAI: selectable vibration on phone ringing according to proximity sensor (thanks to m4kl4 for his idea)
    - Fix issue with crash when no root
    - Fix issue with crash on deep idle stat dialog
    - Improve speed
    - Reduced su access (only when required)

    1.2.1 (31/10/2012)
    - Changed Fast charge option to match Semaphore_JB_2.5.0. Toggle of this option enables/disables fast charge.

    1.2.0 (24/10/2012)
    - Added option to test vibration level
    - faster reading of settings after installation.

    1.1.8 (14/10/2012)
    - Changed vibration intensity sysfs path (Semaphore 2.4.0)
    - Changed icon

    1.1.7 (02/10/2012)
    - Fixed issue that governor selection was not persist across reboots (I hope it works now).

    1.1.6 (01/10/2012)
    - Fixed issue that governor selection was not persist across reboots.
    - Added option to display kmsg (and save it to a file)

    1.1.5 (28/09/2012)
    - Fixed bluetooth issues
    - Added support for interactive governor (Semaphore kernel versions 2.2.0 or later)

    1.1.0
    - Implemented Swipe Views
    - Made project open source (GPLv2)

    1.0.1 (20/09/2012)
    - fixed issue with zero values to governor tunables
    - fixed issue with SD card read ahead value when reading system settings
    - force scaling max frequency when LiveOC is changed (possible issue)
    - added option to power down bluetooth for deep idle

    Source
    https://github.com/stratosk/semaphore_manager


    Download Semaphore Manager from Google Play
    50
    New version 2.3.0
    - add ondemand tunables early_demand, grad_up_threshold
    - add interactive tunable target_loads
    - add module USB_HID
    - couple of bug fixes

    Available in Google Play In few hours
    34
    New version 2.0.0 (soon on Google Play)
    - Support for Custom Voltage
    - Introduced SAI service (a service that will be used for automated functions)
    - SAI: selectable vibration on phone ringing according to proximity sensor (thanks to m4kl4 for his idea)
    - Fix issue with crash when no root
    - Fix issue with crash on deep idle stat dialog
    - Improve speed
    - Reduced su access (only when required)
    31
    OK, I finalized 2.2.0
    Available on Google Play
    31
    New version 1.2.0
    - Added option to test vibration level
    - faster reading of settings after installation.

    soon on Google play