please halp me to fix my touchscreen...!!
after upgrade to ICS .587 touch so error.!!
Thank for solution
after upgrade to ICS .587 touch so error.!!
Thank for solution
Has your phone been repaired? Some cheap replacement parts such as touch digitizers don't work with anything but gingerbread.
hi,
this is due to a thermal sensor built in the phone... had the same problem... install gscript lite or $cripter from play store and run this script i found in a xda thread....
#!/system/bin/sh
dev=/sys/devices/platform/spi_qsd.0/spi0.0
app_id=`cat $dev/appid`
case "$app_id" in
"0x0603")
fw=touch_mango_seiko.hex
;;
"0x0103")
fw=touch_mango_sony_type1.hex
;;
"0x0113")
fw=touch_mango_sony_type2.hex
;;
"0x0203")
fw=touch_mango_hitachi.hex
;;
*)
fw=touch_mango_sony_type1.hex
;;
esac
cyttsp_fwloader -dev $dev -fw /system/etc/firmware/$fw -verify_only
sleep 5
reboot -p
should do the trick... hope this helps....
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
hi,
this is due to a thermal sensor built in the phone... had the same problem... install gscript lite or $cripter from play store and run this script i found in a xda thread....
#!/system/bin/sh
dev=/sys/devices/platform/spi_qsd.0/spi0.0
app_id=`cat $dev/appid`
case "$app_id" in
"0x0603")
fw=touch_mango_seiko.hex
;;
"0x0103")
fw=touch_mango_sony_type1.hex
;;
"0x0113")
fw=touch_mango_sony_type2.hex
;;
"0x0203")
fw=touch_mango_hitachi.hex
;;
*)
fw=touch_mango_sony_type1.hex
;;
esac
cyttsp_fwloader -dev $dev -fw /system/etc/firmware/$fw -verify_only
sleep 5
reboot -p
should do the trick... hope this helps....
