at the bottom of the list in vengeance 1.32 download folder
should be free
but not work
So everyone is doing something, but can not tell to anyone you did poorly.
and if it is for the bad must be to say that it is good
so no one progresses
and now you have to listen google is the best
and you've got Android which consumes the battery without sim card freeas as other phones with sim
but it, it is forbidden to say
Sony's doesn`t hawe any design more
They taken design from the television set!
it is forbidden to say
You there from xda and what must be with your children then
It was then, not like this
mr rush and others members
rejoiced when he says that is done poorly
because I showed mistake, that he should not search
he should not have to personally search
but it was time from windows mobile and now andorid people thinking different
example
us was enough
- battery picture,
- numbers
- circle
Now they must draw
- battery percentage and battery picture
it is the wey of thinking
I tried really hard to understand about what are you talking about, but no avail.
Explain a bit, please.
my phone's battery percentage on the notification bar showed %15 and then instantly(just in 1 second maybe even less) decrease %0.
what should i to do? what is this problem about? and if i don't give enough information just say what information is needed.
thank you already
my phone's battery percentage on the notification bar showed %15 and then instantly(just in 1 second maybe even less) decrease %0.
what should i to do? what is this problem about? and if i don't give enough information just say what information is needed.
thank you already
you need calibration
- Go to Google market and search " battery calibration" by NEMA ... Follow steps... You will get calibrated battery
never until nowToday i have a restart after i hang up the conversation. Anyone?
/*
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the responsibilities.
[COLOR="Red"] * Flashing kernel requires unlocked bootloader.
[/COLOR] * You can unlock your bootloader from [URL="http://unlockbootloader.sonymobile.com/"][COLOR="Blue"][U]here[/U][/COLOR][/URL].
*/
Frankly, I don't like bloated and fancy OP's. So I kept the thread simple and clean. Changelogs are not posted here. Check the link in the description.
All the best!
* Based on official 4.1.B.1.13 sources
* Compiled using LINARO 4.7.3 Toolchain
* Added smart overclocking support upto 1.7 GHz
* Init.d support
* O2 optimizations
* CAF backport fixes
* Updated crc32 lib and jhash
* VDD sysfs level interface
* ARM_THUMBEE Support
* Removed debugging s**ts
* Optimized Low Memory Killer
* Swap and zram support
* ext 2/3/4 support
* Salvaged RAM
* Integrated CWM recovery
* SLUB Memory allocator
* LZO compression
* 2 way call recording
* CIFS, NTFS, FUSE and TUN as external modules
* Memcopy and compaction
* Added Cleancache
* Added frandom
* Optimized ARM RWSEM algorithm and ashmem
* /rootfs and /system mounted as rw
* Persistent adb
* Google Snappy Drivers
* Added other miscellaneous optmizations
* Governors : + Interactive
+ Ondemand
+ Performance
+ Userspace
+ Powersave
+ Conservative
+ InteractiveX
+ OndemandX
+ Smoothass
+ Brazilianwax
+ Smartass2 with boost pulse
+ SmartassH3
+ Intellidemand2
+ Virtuous
* IO Schedulers : + Noop
+ SIO - default
+ CFQ
+ VR
+ ROW
+ ZEN
+ Anticipatory
+ deadline
* [COLOR="Red"]See changelog or commits for detailed info.[/COLOR]
[/B]
[COLOR="Purple"]Root Binary[/COLOR] : ( Flashable via recovery )
* SuperSU : [URL="http://download.chainfire.eu/204/SuperSU/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
* Superuser : [URL="http://androidsu.com/superuser/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
[COLOR="Purple"][U]Instructions[/U][/COLOR] :
* To flash : fastboot flash boot boot.img
* To hotboot : fastboot boot boot.img
* Via FlashTool
F.A.Q's :-
[CENTER]CODENAME OF ARC : [COLOR="Red"]ANZU[/COLOR][/CENTER]
[CENTER]CODENAME OF ARC S : [COLOR="Red"]AYAME[/COLOR][/CENTER]
[CENTER]CODENAME OF PRO : [COLOR="Red"]IYOKAN[/COLOR][/CENTER]
[CENTER]CODENAME OF NEO : [COLOR="Red"]HALLON[/COLOR][/CENTER]
[CENTER]CODENAME OF NEO V : [COLOR="Red"]HAIDA[/COLOR][/CENTER]
[CENTER]CODENAME OF NEO L : [COLOR="Red"]PHOENIX[/COLOR][/CENTER]
[center][U]
[URL="http://www.mediafire.com/?kb784mb7ai4o8"][COLOR="BROWN"] Download Kernel [/COLOR][/URL][/center][/U]
[CENTER][URL="https://github.com/rachit-rc96/Vengeance-Kernel-MSM7x30/blob/master/Changelog.txt"][COLOR="RED"]Changelog[/URL][/COLOR][/U][/CENTER]
#!/system/bin/sh
sleep 10;
#Tweak SD readahead values
echo 1024 > /sys/devices/virtual/bdi/179:0/read_ahead_kb;
echo 1024 > /sys/devices/virtual/bdi/default/read_ahead_kb;
#File system tweaks
busybox rm -rf /data/tombstones/*;
#Tweak various memory settings
sysctl -w vm.dirty_ratio=20;
sysctl -w vm.dirty_background_ratio=5;
sysctl -w vm.vfs_cache_pressure=300;
sysctl -w vm.oom_kill_allocating_task=0;
sysctl -w vm.min_free_kbytes=2048;
sysctl -w vm.dirty_expire_centisecs=200;
sysctl -w vm.dirty_writeback_centisecs=500;
sysctl -w vm.panic_on_oom=0;
sysctl -w vm.overcommit_memory=1;
sysctl -w vm.overcommit_ratio=50;
sysctl -w vm.swappiness=0;
sysctl -w kernel.panic_on_oops=1;
sysctl -w kernel.panic=10;
#!/system/bin/sh
sleep 40;
hd;
#!/system/bin/sh
exec > /dev/null 2>&1
if [ "$1" != "BG" ]; then $0 BG & exit 0; fi
sleep 10;
#Tweak SD readahead values
echo 1024 > /sys/devices/virtual/bdi/179:0/read_ahead_kb;
echo 1024 > /sys/devices/virtual/bdi/default/read_ahead_kb;
#File system tweaks
busybox rm -rf /data/tombstones/*;
#Tweak various memory settings
sysctl -w vm.dirty_ratio=20;
sysctl -w vm.dirty_background_ratio=5;
sysctl -w vm.vfs_cache_pressure=300;
sysctl -w vm.oom_kill_allocating_task=0;
sysctl -w vm.min_free_kbytes=2048;
sysctl -w vm.dirty_expire_centisecs=200;
sysctl -w vm.dirty_writeback_centisecs=500;
sysctl -w vm.panic_on_oom=0;
sysctl -w vm.overcommit_memory=1;
sysctl -w vm.overcommit_ratio=50;
sysctl -w vm.swappiness=0;
sysctl -w kernel.panic_on_oops=1;
sysctl -w kernel.panic=10;
#!/system/bin/sh
exec > /dev/null 2>&1
if [ "$1" != "BG" ]; then $0 BG & exit 0; fi
sleep 40;
/system/xbin/hd;