Since The Pantech Breakout does not have it's own forum I'm posting here.
NOTE: Following These steps you can easily root your Pantech Breakout even if you are a Windows 8 user with no compatible drivers available for your PC.
I did this to a Pantech Breakout using my Windows 8.1 laptop, no drivers used, worked perfectly!
Files Needed:
-BreakoutAllinOnePkg.zip
-BreakoutRoot.zip
Files can be downloaded from:
INSTALLING CLOCKWORKMOD RECOVERY:
1- Unzip "BreakoutAllinOnePkg.zip"
2- Open RecoveryAIO
3- Type "1"
4- Press "Enter" & Hit Any Key
5- Continue to Rooting Device
----------------------------------
If you get the message:
That means your computer does not have compatible drivers for it.
You need to enter to fastboot manually.
Enter Fastboot Mode Manually:
A. Turn off phone and hold down back button
B. While still holding back button insert usb cable
C. Continue to hold back button until "android development mode" appears on screen.
D. That's it you are in fastboot mode.
Now Re-Do Steps 1-4 to complete CWMRecovery Installation.
(Advanced Users)
----------------------------------
CWM RECOVERY NAVIGATION ON PANTECH BREAKOUT:
Volume Keys - Up/Down
Power Button - Back
Camera Button - Select
ROOTING DEVICE:
You Need to put "BreakoutRoot.zip" in your SD Card.
1- Boot Into Recovery (With the Phone Powered Off Hold the Search and the Power Button)
2- Install Zip From SD Card
3- Choose ZIP from SD Card
4- Select "BreakoutRoot.zip"
5- Reboot! Enjoy =]
NOTE: Following These steps you can easily root your Pantech Breakout even if you are a Windows 8 user with no compatible drivers available for your PC.
I did this to a Pantech Breakout using my Windows 8.1 laptop, no drivers used, worked perfectly!
Files Needed:
-BreakoutAllinOnePkg.zip
-BreakoutRoot.zip
Files can be downloaded from:
INSTALLING CLOCKWORKMOD RECOVERY:
1- Unzip "BreakoutAllinOnePkg.zip"
2- Open RecoveryAIO
3- Type "1"
4- Press "Enter" & Hit Any Key
5- Continue to Rooting Device
----------------------------------
If you get the message:
Code:
Installing Recovery
Press any key to continue . . .
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
< waiting for device >"
You need to enter to fastboot manually.
Enter Fastboot Mode Manually:
A. Turn off phone and hold down back button
B. While still holding back button insert usb cable
C. Continue to hold back button until "android development mode" appears on screen.
D. That's it you are in fastboot mode.
Now Re-Do Steps 1-4 to complete CWMRecovery Installation.
(Advanced Users)
Optional You can Flash the "cwmrecovery.img" included in "BreakoutAllinOnePkg.zip" with ADB If you dont want to use the AIO Batch File.
----------------------------------
CWM RECOVERY NAVIGATION ON PANTECH BREAKOUT:
Volume Keys - Up/Down
Power Button - Back
Camera Button - Select
ROOTING DEVICE:
You Need to put "BreakoutRoot.zip" in your SD Card.
1- Boot Into Recovery (With the Phone Powered Off Hold the Search and the Power Button)
2- Install Zip From SD Card
3- Choose ZIP from SD Card
4- Select "BreakoutRoot.zip"
5- Reboot! Enjoy =]
Last edited: