FORUMS
Remove All Ads from XDA
Post Reply Email Thread
Hello everybody

Just bought a CX 919 II and is very good. Great wifi reception, fast and very usefull. Problem is that i want to root but dont find a way to do it in the "whole" internet. I read that is different fron cx919 and that the roms for cx 919 doesent apply to cx919 II. Thanks if anyone can help
9th May 2014, 07:58 PM |#2  
arnookie's Avatar
Senior Member
Thanks Meter: 121
 
More
Quote:
Originally Posted by Delgadovsky

Hello everybody

Just bought a CX 919 II and is very good. Great wifi reception, fast and very usefull. Problem is that i want to root but dont find a way to do it in the "whole" internet. I read that is different fron cx919 and that the roms for cx 919 doesent apply to cx919 II. Thanks if anyone can help


Here you go fella give us a thumbs up if it works for you. It did with my "CX 919 II" :0)

link for software here should work on any "CX-919" device / TVstick

http://www.share-online.biz/dl/54FMSCQM0U

1. plugin cx-919 II with usb-cable on "usb" to usb-slot on computer and wait for detection as "cx-919".
2. a new device detected, called "cx-919" or "CX-919 II), go to device manager and install the
latest usb google sdk driver from sdk android 4.2.2 file "android_winusb.inf"
path to file: RK3188_ROOT\usb_driver
(included in this file, modded for x64 and x86 os for rk3188 detection).
3. after installation usb-driver, cx-919 now detected as "android composite adb interface"

for test driver install go to root directory from attached file and go to cmd and call:

adb devices

you should see a message like this:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
0123456789ABCDEF device 4. next call "TPSparkyRoot.bat"
5. follow the onscreen instruction, 3 reboots and you have root
(wait for every step at least 2 minutes, so you are sure your device is rebooted and ready for next step...)
6. plug in cx-919 in tv and start app "Super SU" execute binary update and upgrade to latest version through google play store...

http://www.share-online.biz/dl/54FMSCQM0U
The Following 2 Users Say Thank You to arnookie For This Useful Post: [ View ] Gift arnookie Ad-Free
10th May 2014, 12:41 AM |#3  
Delgadovsky's Avatar
OP Senior Member
Flag Lisboa
Thanks Meter: 184
 
More
Quote:
Originally Posted by arnookie

Here you go fella give us a thumbs up if it works for you. It did with my "CX 919 II" :0)

link for software here should work on any "CX-919" device / TVstick

http://www.share-online.biz/dl/54FMSCQM0U

1. plugin cx-919 II with usb-cable on "usb" to usb-slot on computer and wait for detection as "cx-919".
2. a new device detected, called "cx-919" or "CX-919 II), go to device manager and install the
latest usb google sdk driver from sdk android 4.2.2 file "android_winusb.inf"
path to file: RK3188_ROOT\usb_driver
(included in this file, modded for x64 and x86 os for rk3188 detection).
3. after installation usb-driver, cx-919 now detected as "android composite adb interface"

for test driver install go to root directory from attached file and go to cmd and call:

adb devices

you should see a message like this:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
0123456789ABCDEF device 4. next call "TPSparkyRoot.bat"
5. follow the onscreen instruction, 3 reboots and you have root
(wait for every step at least 2 minutes, so you are sure your device is rebooted and ready for next step...)
6. plug in cx-919 in tv and start app "Super SU" execute binary update and upgrade to latest version through google play store...

http://www.share-online.biz/dl/54FMSCQM0U

Thanks a lot. Just great
10th May 2014, 01:00 AM |#4  
arnookie's Avatar
Senior Member
Thanks Meter: 121
 
More
Quote:
Originally Posted by Delgadovsky

Thanks a lot. Just great

Hope it worked for you. )

---------- Post added at 01:00 AM ---------- Previous post was at 12:56 AM ----------

Quote:
Originally Posted by Delgadovsky

Thanks a lot. Just great

If you need a new firmware let me know especially if you find its locked to 1ghz as some are at the moment. check speed with perfmon.apk I have firmware that goes to 1.43 ghz. But I can't get display higher than 530p on any firmware. The firmware is from april 2014 build from what I can remember. ;0) I'm tempted to make a firmware myself for this stick if I can with 1080p hd, 1.8ghz cpu (stock max) and overclocked mali gpu.
12th May 2014, 07:45 PM |#5  
racka's Avatar
Senior Member
Thanks Meter: 20
 
More
Quote:
Originally Posted by arnookie

Hope it worked for you. )

---------- Post added at 01:00 AM ---------- Previous post was at 12:56 AM ----------



If you need a new firmware let me know especially if you find its locked to 1ghz as some are at the moment. check speed with perfmon.apk I have firmware that goes to 1.43 ghz. But I can't get display higher than 530p on any firmware. The firmware is from april 2014 build from what I can remember. ;0) I'm tempted to make a firmware myself for this stick if I can with 1080p hd, 1.8ghz cpu (stock max) and overclocked mali gpu.

Hi, can you please share a good, perhaps cpu, gpu an ram overclocked version with wifi and bt working? I have looked all over the internet. Bricked a couple of times. Bit still didn't find a fully working rom yet.

Thanks.

Verstuurd vanaf mijn HTC One met Tapatalk
12th May 2014, 11:59 PM |#6  
arnookie's Avatar
Senior Member
Thanks Meter: 121
 
More
Quote:
Originally Posted by racka

Hi, can you please share a good, perhaps cpu, gpu an ram overclocked version with wifi and bt working? I have looked all over the internet. Bricked a couple of times. Bit still didn't find a fully working rom yet.

Thanks.

Verstuurd vanaf mijn HTC One met Tapatalk

OK here you go. ) This is the most recent 1.4GHZ stock rom for the CX 919II model CYX_809III_RK3188 V2_1 20140208 ; http://www.mediafire.com/download/o4...ng_1.46ghz.zip
As usual flash at your own risk ;0) Don't hold me responsible if you brick or damage your device.

The best way of knowing what firmware and kernel to use is to pry open you'r cx-919 and get the information printed on the mainboard.
It will say something like CYX_809III_RK3188 V2_1 20140208
If you post the information on this thread I will try find the best firmware for you.
CYX_809III_RK3188 V2_1 20140208

The one above is specific to the CX 919ii / CYX_809III_RK3188 V2_1 20140208.


HERE IS A 4.4 KITKAT ROM for the CX919II_andriod_4.4_tech_rk31_dongle_ap6210_140403
But I have not tested it yet on the above board. But give it a try if you like.
https://mega.co.nz/#!QtlAwLgQ!Q6VNlh...Ro9VA7TWjaXlZU

For most 919 II devices just look here for the firmware and kernel.
http://www.freaktab.com/forumdisplay...T-R42-CX919-II

Kitkat rom thread but read it carefully and caution using it if your board is a CYX_809III_RK3188 V2_1 20140208 (but it might work)
http://www.freaktab.com/showthread.p...ing-the-device!!!

---------- Post added at 11:59 PM ---------- Previous post was at 11:33 PM ----------

Another kitkat firmware you can also try that may work on the CX 919II device with board CYX_809III_RK3188 V2_1 20140208
http://allminipc.com/forum/viewtopic.php?f=3&t=1185
The Following User Says Thank You to arnookie For This Useful Post: [ View ] Gift arnookie Ad-Free
27th May 2014, 02:46 PM |#7  
racka's Avatar
Senior Member
Thanks Meter: 20
 
More
Quote:
Originally Posted by arnookie

Here you go fella give us a thumbs up if it works for you. It did with my "CX 919 II" :0)

link for software here should work on any "CX-919" device / TVstick

http://www.share-online.biz/dl/54FMSCQM0U

1. plugin cx-919 II with usb-cable on "usb" to usb-slot on computer and wait for detection as "cx-919".
2. a new device detected, called "cx-919" or "CX-919 II), go to device manager and install the
latest usb google sdk driver from sdk android 4.2.2 file "android_winusb.inf"
path to file: RK3188_ROOT\usb_driver
(included in this file, modded for x64 and x86 os for rk3188 detection).
3. after installation usb-driver, cx-919 now detected as "android composite adb interface"

for test driver install go to root directory from attached file and go to cmd and call:

adb devices

you should see a message like this:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
0123456789ABCDEF device 4. next call "TPSparkyRoot.bat"
5. follow the onscreen instruction, 3 reboots and you have root
(wait for every step at least 2 minutes, so you are sure your device is rebooted and ready for next step...)
6. plug in cx-919 in tv and start app "Super SU" execute binary update and upgrade to latest version through google play store...

http://www.share-online.biz/dl/54FMSCQM0U

These last 2 hours I was struggling to get the deamon tool to recognize the device. I am doing something wrong and can't get the driver installed.
Can you clarify something for me?

The instruction says plug in the cable between the usb port of the stick and the usb of the pc.

Does this mean using a usb-a to usb-a cable? Or this is supposed to be from the otg port to pc?

Edit:

I finally figured it out.

Stupid me. First I enabled usb debugging. The once I was sitting in front of my oc I thought, hey let me flash the new firmware first. So I did, and it was successful.

Afterwards I directly started rooting. See what happened here?
I forgot to enable usb debugging again! Another 120 minutes of my life wasted :P
27th May 2014, 03:07 PM |#8  
D4rkD4ni's Avatar
Senior Member
Thanks Meter: 10
 
More
Quote:
Originally Posted by racka

These last 2 hours I was struggling to get the deamon tool to recognize the device. I am doing something wrong and can't get the driver installed.
Can you clarify something for me?

The instruction says plug in the cable between the usb port of the stick and the usb of the pc.

Does this mean using a usb-a to usb-a cable? Or this is supposed to be from the otg port to pc?

Verstuurd vanaf mijn HTC One met Tapatalk

Otg

Sent from Samsung Galaxy Note 2
The Following User Says Thank You to D4rkD4ni For This Useful Post: [ View ] Gift D4rkD4ni Ad-Free
27th May 2014, 05:19 PM |#9  
arnookie's Avatar
Senior Member
Thanks Meter: 121
 
More
Quote:
Originally Posted by racka

These last 2 hours I was struggling to get the deamon tool to recognize the device. I am doing something wrong and can't get the driver installed.
Can you clarify something for me?

The instruction says plug in the cable between the usb port of the stick and the usb of the pc.

Does this mean using a usb-a to usb-a cable? Or this is supposed to be from the otg port to pc?

Edit:

I finally figured it out.

Stupid me. First I enabled usb debugging. The once I was sitting in front of my oc I thought, hey let me flash the new firmware first. So I did, and it was successful.

Afterwards I directly started rooting. See what happened here?
I forgot to enable usb debugging again! Another 120 minutes of my life wasted :P

People do it all the time, a simple thing like flash a rom and forgetting to re enable debugging. lol
No worries if you sorted it and yes its always micro usb otg port to lappy.
Have you tried the latest rom I posted yesterday? I have not had time to try it yet.
27th May 2014, 09:12 PM |#10  
racka's Avatar
Senior Member
Thanks Meter: 20
 
More
Quote:
Originally Posted by arnookie

People do it all the time, a simple thing like flash a rom and forgetting to re enable debugging. lol
No worries if you sorted it and yes its always micro usb otg port to lappy.
Have you tried the latest rom I posted yesterday? I have not had time to try it yet.

Yes I have installed the rom. It's 1.43 ghz again. However my antutu benchmark score was 400 lower than with the last rom. I'm no expert in doing benchmarks but i'm pretty shure I did it the same way.

And it's 4.2.2

Verstuurd vanaf mijn HTC One met Tapatalk
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes