FORUMS
Remove All Ads from XDA
Honor 7x
Win an Honor 7X!
Thread Deleted Email Thread
Prev Previous Post   Next Post Next
I have just replaced the lcd and digitizer for my Nexus 7. The repair was about as easy as expected. I put everything back together and all the ribbon cables are seated as they should be. My issue is that it will not power up or stay on when I fit the back cover on.
I can power on the device with the case half way on it powers up and the touchscreen is fine. I fit the back cover back on and it's like it shorts outs. The screen goes black.
I have pulled it apart again and have checked and rechecked all my cables and reseated the battery. Both boards are seated. The symptoms tell me it should be a poorly seated cable but they are seated just as I found them.

Has anyone else run into something like this or have any other ideas on what it might be?

Sent from my SM-N900A using XDA Free mobile app
Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes