[ROM]WM6.5 fxdjROM2.0 UPDATE6 Build 21840 Free RAM 140MB Battery driver

Hi. 15-09-2011

Because of some asks I would like to remind that SPB Shell in my roms is trial version and is active only two weeks.
It is full functional version and to be operational version it requires serial code.
Do not be surprsied when You will loose GUI and none access to the system.
Use "face" to execute Total Commander or any other software You configured before
which allow You to execute needed system software, additional cabs, romove some cabs , etc. so that to make You system be full functional again.

Regards
fxdjacentyfxd

Hi. 18-07-2011

Below You will find links to UPDATE6 of my rom.
All concerns radio 1600.
Accordingly to some users asks, I improved some of my software:

1) fxdjBatteryStubGauge - in current version it is configurable so that user
could select whether he wants to be warned ( sound warning - even in sleep mode ) that current battery level is below configured level.
If You want this feature please read posts starting from here :

http://xdaforums.com/showthread.php?t=993343&page=32

Additionaly, I add "inactive period" so that user were not disturbed by sound warning when he sleeps. For example one can set that from 22:00:00 to 06:00:00 warning sound will be inactive.

2) fxdjWMSBU - I would like to remind it is software responsible for "face".
One ot its feature was possibility to execute total commander so that to prevent user for doing hardware reset. Now, what software will be executed is configurable. If something go wrong, total commander is executed as default.

I added some packages:

a) ArkSwitch as a .cab
b) PIM backup
c) RDP
d) msn weather
e) opera mini as a .cab

Here two versions with NCF3.7 :

http://www.sendspace.com/file/onddyi - 134MB free RAM ( recommended )
http://www.sendspace.com/file/bkmxwy - 138MB free RAM

Here two versions with NCF3.5 :

http://www.sendspace.com/file/2frmhm - 134MB free RAM ( recommended )
http://www.sendspace.com/file/2dqx3t - 138MB free RAM

I was in hurry so I forgot to prepare configuration settings in my rom.
Here :
http://www.sendspace.com/file/tlmu1h
zip file with two reg files concerning fxdjBatteryStubgauge and fxdjWMSBU


After flashing hard reset as usual is required and please tap "ActiveSync Enable"
from my Utils directory so that AS worked as typical.

For people who like hardcore special version with 142MB of free RAM.
With radio 1600 and NCF 3.7. Not tested at all but should work. I hope
someone tell me what does not work.

http://www.sendspace.com/file/uad01r


Enjoy

Regards
fxdjacentyfxd

************************************************************

Hi. 31-05-2011

Because I did some works concerned with manual management of ActiveSync
and some people ask me about roms with NCF3.5 instead NCF3.7 ( NCF 3.5 has directx assembly needed by some software like Google Navifgator ) I decided to release UPDATE5 of my WM 6.5 roms. All with radio 1600 .

Here two versions with NCF3.7 :

http://www.sendspace.com/file/dt2ydj - 134MB free RAM ( recommended )
http://www.sendspace.com/file/vuj7nr - 138MB free RAM

Here two versions with NCF3.5 :

http://www.sendspace.com/file/kmfsv5 - 134MB free RAM ( recommended )
http://www.sendspace.com/file/qb760n - 138MB free RAM


Additional AS managment in directory Utils like other additional software
( some tools for GPS management ):

Here link to post with picture :

http://xdaforums.com/showpost.php?p=14247007&postcount=292


After flashing hard reset as usual is required and please tap "ActiveSync Enable"
so that AS worked as typical.
Remember that my AS utilities do not eliminate need to change TG01/PC connection settings ( "mass storage"/ "AS" ) in "Settings". They only block/unblock AS so that none software was able to execute it.
"ActiveSync Kill" removes AS executables when AS connection is finished.
For example, after disconnecting USB cable between TG01 and PC, AS connection is broken but AS software is still in memory.
Additionally, transcriber software has been added.



Enjoy

Regards
fxdjacentyfxd


************************************************************************************************************************


Hi. 16-04-2011

Here http://www.sendspace.com/file/iowu3j

PATCH1 for UPDATE4 ROM . Can be applied for earlier updates ( UPDATE1, 2 a and 3 ) too
It contains the same as file already included here :

http://xdaforums.com/showpost.php?p=12922239&postcount=240

How to apply it is here : http://xdaforums.com/showpost.php?p=12922239&postcount=240 too.


What is is for ? Words of collegaue koku32 explain everything:

http://xdaforums.com/showpost.php?p=12931207&postcount=248

I guess that in other cooked roms which utilze any .cab for WM start disabling ,
situation is similar but not fixed like in my rom. It is possible to delete there one of this
0-bytes .cpr file and WM start is active again and additional free RAM will be lost.

Enjoy

Regards
fxdjacentyfxd



******************************************************************************************
******************************************************************************************

Today I have released UPDATE4 of my fxdjROM2.0 rom.

fxdjROM2_0_update4_radio321_buildxip21840_VER1.zip
http://www.sendspace.com/file/hyln2i

fxdjROM2_0_update4_radio1600_buildxip21840_VER1.zip
http://www.sendspace.com/file/dbdhq6


fxdjROM2_0_update4_radio1600_buildxip21840_VER2.zip
http://www.sendspace.com/file/6ol3ux

fxdjROM2_0_update4_radio321_buildxip21840_VER2.zip
http://www.sendspace.com/file/65y66a

In two versions and two radios as previously.
Version1 has about 134-135MB of free ram and I recommend it as absolutely stable.
Version 2 has about 138-139MB of free ram. Some poeple tested it and their oppinions You can read somewhere in the thread.


What new/improved/fixed in comparison to UPDATE3 ? :

1) windows start button "defreezer" . Now there is no any fereeze when user tap on wm start button. "face" appearing in place of start button has two meanings:
- is for fun
- it is "life saver" place. Why ?

Sometimes people uninstall SPB Shell and do not remember that start button is disabled. If they do it - only hard reset can save their life . So far they could uninstall special .cab responsible for disabling wm start button and then they could uninstall spb shell safely. Anyway , even if someone remove current UI , he will not be in "black whole" anymore. If this happens:

- simply tap on wm start button to cause the "face" will appeare
- wait for a while and tap on the "face" before it disappeares

Now You can notice that Total Commander has been executed.
Having Windows Commander You can do any operations like installing new UI or something other. No hard reset required.
This Total Commander it is special copy of Total Commander and is placed in special directory. You can update/remove current installed version of Total Commander and it will have no any influence on the copy designed for safety reasons.

2) fixed soft "home" and "back" button. Now soft "home" button and "back" button
works as they should. As You maybe remember, before PATCH1 to UPDATE3, back button worked as ... home button too.
3) internally fixed battery driver.
4) my last software for GPS driver/service restart/status
5) because I do not like when there are sometimes "strange" ramains on application list ( making calls and recieving calls create such remains from phone.exe ), I created "killer" of this. Nobody will need this but I like to have "clean in home"

Elements from point 4) and 5) I placed in newly created directory called "Utils".
You will find it in "Programs" as directory and four applications inside.

Of course, people utilizing my UPDATE3 and PATCH1, rather will not gain too much in this update but everybody can do as wants.



Enjoy

Regards
fxdjacentyfxd



******************************************************************************************
******************************************************************************************

I attached patch1.zip file here :

http://www.sendspace.com/file/2rgybg


It is fix patch containing following files:

1) fxdjTG01HKMapper.exe
2) fxdjWMSBU.exe
3) fxdjWMSBU.lnk


It may be bit complicated to apply this files manualy ( I have no time to create special setup ) for less experienced users so if tests made by experienced users will go ok, I will realease it in UPDATE4 of my rom.
What this files change in my rom and how to apply them ?

a) fxdjTG01HKMapper.exe . This software is already runing on my rom. It fixes "back" button. Current version has bug. "Back" button does the same action as "home" button. Attached version of file fix it. Unfortunately , still unresolved problem of "zoom" button but
nobody even asked about it so far ( I know Oly, You asked )
To apply this file utilize fdcTaskManager which is on my rom in "Programs". Execute fdcTaskManager and close running version of
fxdjTG01HKMapper.exe. You will see it on "Process list " and You can close it there. First select "Close" but if it will be not possible, select "Kill". After closing, copy attached version of fxdjTG01HKMapper.exe to "\windows" directory so that to overwrite old version.
If You want save old version before it. I did not find new version unstable but who knows

b) fxdjWMSBU.exe and fxdjWMSBU.lnk . This software partially resolve problem of WM freezing
when user taps on WM start button. But we know that user should not tap on it because it is disabled
Copy fxdjWMSBU.exe to "\windows" directory and copy fxdjWMSBU.lnk to "\windows\startup" directory

c) Restart the system !


Enjoy

Regards
fxdjacentyfxd




******************************************************************************************
******************************************************************************************
Hi.

UPDATE 3 of my rom has been created.
It is functionally the same rom as UPDATE 2
but fixed so that camera software worked fine.
I released this update in two versions:

1) Version 1 - has about 134-135MB of free RAM. Works perfect.
Has been testing ( utilizng ) by me for 3 days ( almost all embeded software ) so I recommend this version.

Issued with two radios : 1600 and 321 . Here links for download:

http://www.sendspace.com/file/shac66 - radio 321
http://www.sendspace.com/file/3s1cuq - radio 1600


2) Version 2 - has about 138-139MB of free RAM. I tested it only a little bit to see whether camera software works correct.
One can expect maybe more lags or other effects but feel free to test it and let me know.

Issued with two radios : 1600 and 321. Here links for download:

http://www.sendspace.com/file/r0t10t - radio 321
http://www.sendspace.com/file/8cqmiq - radio 1600


Regards
fxdjacentyfxd


******************************************************************************************
******************************************************************************************

Hi.

As I promissed , UPADATE 2 of my rom has been created.
UPADTE 1 was not living even one day

Here http://www.sendspace.com/file/ei99x1
You can download it with radio 1600. Tested by me so surely works fine.
Maybe eving and tomorrow
morning I will upload version with radio 321.


Here http://www.sendspace.com/file/x59wd3
version with radio recently popular 321 radio.
I did not test it at all so any complains not for me if do not work

In this update ( both radios above - 1600 and 321 )You have all that was in UPDATE 1 and ....
I removed annoying lock screen during calls/talks . Now You can
navigate through the system during call and even utilize my software
to switch backlight off what is sensible because backlight eats energy.
This software You will find in my "Power" directory. One tap to screen and
You have backlight on again. It works like toggle.

Enjoy

Regards
fxdjacentyfxd


***************************************************************************************************
***************************************************************************************************



Here http://www.sendspace.com/file/gaxs06
link to update 1 of my rom.
What changed :

1) soft "home key" button works perfect and from any appplication user
can go to SPB Shell home screen
2) fix in registry concerning SRDHD - thanks colleague koku37 for this. Now
"internal" mode is remembered between system restarts.
After flashing this rom and doing hard reset, one has to select SRSHD control panel and select mode ( hedphones or internal ) because none of them is selected. After this and changin other settings it is permamanet and rememebered between system restarts.
3) Registry fixex concerning installed java and facebook

Other features of my rom - read all this post untill the end


P.S. Wait for may UPDATE 2 release. I hope I will remove annoying lock screen
showing up during calls/talks

Enjoy

Regards
fxdjacentyfxd


***************************************************************************************************
***************************************************************************************************


original version still availablle here:
http://www.sendspace.com/file/yxeup9


Features ( concerns basic version, UPDATE1 and UPDAT2 too ):
1) On startup about 298MB free ROM and 140MB free RAM
2) Base user shell is SPB shell 3.5.5 added as .cab
3) Other installed .cabs

a) Latest Palringo communicator ( includes facebook chat )
b) CorePlayer
c) Total Commander
d) Disabled WM menu .cab
e) Shutter sound disabling cab


4) Embeded software

a) Microsoft and Toshiba keyboards
b) ArcSoft software:
- MMS composer ( integrates with menu for SMS/MMS composing ) - very nice in my oppinion
- Streaming player
- Photo base
c) FDC task manager - powerfull system software
d) my own software for some power managment available as "Power" folder in Programs ( soft reset, standby, backligh off )
e) BT operations notification icon in upper bar - well known solution from other roms. I do not know whose software it is
nethertheless thanks the author for it.
f) Microsoft Office 2010
g) Java
h) Facebook application
i) Screen Capture
k) SRS WOW HD . End with with this awfull, well known strange 3 cab installation.
I did not notice any problem with stable work.
This software ( its usage ) has been improved by me. If anybody does not like this software or find it not stable ( after installing any additional software ) then one can disable it. It is not deinstallation ! One can switch between original audio drivers and SRS drivers. I created special directory ( SRSHD Manager ) for managing it and that is why I moved SRS control panel from "settings->system" to this directory.
You will find there 3 icons ( as on attached picture ):

- Control Panel ( well known )
- Disable ( disables SRS, enables original audio ) - one restart required after it
- Enable ( disables original audio, enables SRS ) - one restart required after it

Other registry tweaks. For example enabling old fashion lock screen which
saves 5MB of RAM in comparison to new fashion lock screen.

And of course my incerdible battery driver which allows all battery level sensitive software run without any problems until real 0% battery level without any interruption from the system. Never more 20% warning messages, software execution protection and battery discharge to real "0" - about 2.9V


For GPS users. I noticed that some people install new GPS driver as a cab. Why ? Does it work better than original ?
I always change GD9 in my roms to COM4 ( I do not even know if it is needed at all ) and have never had any problems
with Ozi Explorer, Garmin Mobile XT and AM . Maybe other navigation software have problems. I do not know. It would be nice
if experienced users write something here about it.

As usual ROM created via osBuilder and feropont kitchen so thank
Him for it.

After flashing hard reset is required ( via buttons combination or via "Master Clear" software in system settings ).

Enjoy


Regards
fxdjacentyfxd

olyloh6696 said:

Wow! you are our new ROM machine well done fxdjacentyfxd!

Click to expand...

Click to collapse

There is only one real "ROM machine" on the forum - mirolg . I am only software developer
and as You know I do not like cooking

olyloh6696 said:

thats great! 140mb ram on boot with SPB! only 130mb available on 6.1 + SPB! new records! Cheers !

Regards

Click to expand...

Click to collapse

He he, Oly I knew You would be pleased , You "ram eater"

Regards
fxdjacentyfxd

Pere said:

WM 6.5 Forever!!!! I'll test it tomorrow.

I'll update Rom table as well wit last news like yours.

Thanks again

Click to expand...

Click to collapse

I count on Your tests. In "static" applications it seems to be not worse than
my previous roms. My "divx banchmark" ( Matrix in 640x480 resolution ) is similar to this from previous roms. Especially I am interested in java. I only executed it to see if it works at all.

Regards
fxdjacentyfxd

koku37 said:

Congratulations for your work.

Downloading and when can I test it.

I have no time !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

A greeting.

Click to expand...

Click to collapse

Thanks koku37. As I remember You were good tester of my previous rom
I count on You in tests too.

Regards
fxdjacentyfxd

mirolg said:

from RomMachine to RomMachine, very,very good work!!!
ps. i like your lite battery tool and your new sddl+ tool! is a very big EVOLUTION for our tg01 device. and at now- i'm one of your greatest FAN's. RESPECT, my friend!

Click to expand...

Click to collapse

Such compliments from chef number 1.. I am proud


Regards
fxdjacentyfxd

paul89rulez said:

awesome rom but home soft button dont work for me, any tips? sorry 4 my bad english

Click to expand...

Click to collapse

Hi.
You mean enter into windows menu ? As You know it is disabled via disabling .cab in this rom ( You can unistall this cab ) so that to have more ram and because it is simply not needed with SPB shell.

Regards
fxdjacentyfxd

Pere said:

I'd like to test radio: 5007.0000.0321 on this ROM. Yes, yes, I know: I can change radio with awesome Miro's tool but ...well...I'm a bit lazy.... . Seriously, if any of you have already do it and can share it, I would be very gratefully

Best Regards

Click to expand...

Click to collapse

He he. I had dillema with what radio release this rom. 1600 I know and it works ok for me but who knows maybe 321 is better. I can prepare such rom but I will not test it. I have enough to configure my phone for work after every flashing but if You confirm after test, it is really better than 1600 I will test it too

P.S. As I well remember, some colleague wrote testing 321 radio that it generates certain error on roms different than Nokser's rom
but ...."the customer is always right"


Reagrds
fxdjacentyfxd

paul89rulez said:

tx for anwer, but not the start menu, i mean the home button of phone, the left soft buttone in the low side of phone..hum.. dont know if u understand xD sorry again for my bad english, when i come back to home i post a pict with the button

Click to expand...

Click to collapse

Now I know, but frankly speaking I do not know whether it worked in my roms ever . I simply did not use it because I was still .... cooking. Maybe any of users of my previous roms could say more about it ? I have to check whether WM disable .cab works ok and is not responsible for this effect or maybe it is any feature possible to set in SPB shell. From my side I did not do any special to lock this button.

Regards
fxdjacentyfxd

mirolg said:

homesotbutton from spb shell not working or the winMo startmenu? my cab disabled the winMo startbutton + winMo startmenu. after remove this cab, you see the winMo startbutton + winMo startmenu. freeze your device if you like to go in today screen?
if yes check in registry hklm\software\microsoft\today if enabled is 1

Click to expand...

Click to collapse

mirolg, problem is that even after uninstallation of any .cab for WM disabling ( Your or Arto or my which is modification of Your cab ), soft key "home" button does not work. Maybe SPB shell does not serve it ? As I can see it has "home" icons in some places of its menus and they work - user "goes" to home. Not WM home of course but to SPB shell main "desktop".
I checked - enebled in registry is 1

regards
fxdjacentyfxd