CWM 5.8.0.9 for Huawei MediaPad
WARNING !!! DON'T FORMAT AND DON'T WIPE PARTITIONS USING THESE CWM !
I don't know how much this CWM version improves over the existing one by segler11.
However these build were more aimed at compiling and testing the new kernel sources.
I have tested compiling with both arm-eabi-4.4.0 and arm-eabi-4.4.3 with success on Ubuntu 10.04.
This is experimental, however with the new kernel sources it will just be a matter of time.
I have compiled the kernel included in this CWM recovery image but I didn't recompile the complete image.
I took as base Pyramid CWM 5.8.0.9 and I replaced the files from those found on a stock C232B005 kernel.
As the default build configuration I have used the /proc/config.gz of a C232B005 running kernel.
I have tested this CWM to be able to backup these partitions (I have not tested "restore" yet, just checked the tar archives):
BUGS:
The "adb shell" is not active while in CWM recovery, I don't know why and this was my objective so if you have suggestion please help.
As usual flash both "recovery" and "recovery2" partitions using "fastboot" and one of the attached CWM recovery:
WARNING !!! DON'T FORMAT AND DON'T WIPE PARTITIONS USING THESE CWM !
.:HWMOD:.
.
WARNING !!! DON'T FORMAT AND DON'T WIPE PARTITIONS USING THESE CWM !
I don't know how much this CWM version improves over the existing one by segler11.
However these build were more aimed at compiling and testing the new kernel sources.
I have tested compiling with both arm-eabi-4.4.0 and arm-eabi-4.4.3 with success on Ubuntu 10.04.
This is experimental, however with the new kernel sources it will just be a matter of time.
I have compiled the kernel included in this CWM recovery image but I didn't recompile the complete image.
I took as base Pyramid CWM 5.8.0.9 and I replaced the files from those found on a stock C232B005 kernel.
As the default build configuration I have used the /proc/config.gz of a C232B005 running kernel.
I have tested this CWM to be able to backup these partitions (I have not tested "restore" yet, just checked the tar archives):
- boot.img - 12.582.912 (match 12Mb)
- recovery.img - 16.777.216 (match 16Mb)
- data.ext4.tar
- cache.ext4.tar
- system.ext4.tar
- custom.ext4.tar
BUGS:
- data & time on archives are wrong
- mount USB storage does not work
- adb not enabled in recovery mode
- Formats and Wipes do not work don't use them
The "adb shell" is not active while in CWM recovery, I don't know why and this was my objective so if you have suggestion please help.
As usual flash both "recovery" and "recovery2" partitions using "fastboot" and one of the attached CWM recovery:
Code:
fastboot flash recovery recovery-5.8.0.9-HWMOD-eabi-4.4.3.img
fastboot flash recovery2 recovery-5.8.0.9-HWMOD-eabi-4.4.3.img
fastboot reboot
WARNING !!! DON'T FORMAT AND DON'T WIPE PARTITIONS USING THESE CWM !
.:HWMOD:.
.