For how long? I've tried holding it for probably 10 seconds, someone's it does, sometimes not.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
[ROM][KITKAT]BeanStalk-4.4.4065-OC2 [4.4.4](14/10/09)
- Thread starter wantowan2
- Start date
-
- Tags
- development marla moretz
I think it's actually 20 seconds... Works every time for me.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
So far, every 4.2 rom I've tried has the bluetooth issue you listed above. I think people on other devices (like the Nexus) have also reported problems. There might be nothing CvD or anyone can do about it. Of course, I haven't tried every 4.2.2 rom, so I could be wrong.
lazer77
Senior Member
I remember this being a common issue on paranoid for the nexus 7. Doesn't bother me because I don't use it so not really sure if there was a fix eventually implemented, or not.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
That is true. I don't blame cvd for any of the. Just giving feedback for the sake of awareness.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
installed the ROM worked great until I went to make a call and the phone rebooted. Then I realized I should have installed UCMC1 radio. So I downloaded, cleared cache and installed the zip file. Rebooted and same result, when I try to make a call the phone reboots. Any idea?
Maybe try a full wipe and reinstall the ROM. There are still RRs present in the latest version. I should have time tomorrow to get caught up on the progress made there by cyanogen and chopsticks. Just been busy the past few days with family stuff.
You can always stick with 1.05 as your daily if necessary. The zip is in my goo downloads.
Sent from my SAMSUNG-SGH-I727 using xda premium
About Fixing Permissions
There was some sort of a debate or misunderstanding (let's call it confusion) about when we should fix permissions lately.
I just had an interesting behaviour with TWRP 5 minutes ago while flashing BeanStalk 1.210.
I did that:
- Backup of old ROM
- Factory reset
- Install ROM and gapps
- Wipe cache / dalvik
- Fix permissions
I had an error message on Fix permissions.
Fix Permissions Complete
Failed
......
Updating partition details...
Can't check permissions after Factory Reset.
Please boot rom and try again after you reboot into recovery.
Done.
Not a big deal, just wanted to share the info. So maybe the initial CVD instructions were right after all!
Now I'll reboot and check if the ROM is working OK.
There was some sort of a debate or misunderstanding (let's call it confusion) about when we should fix permissions lately.
I just had an interesting behaviour with TWRP 5 minutes ago while flashing BeanStalk 1.210.
I did that:
- Backup of old ROM
- Factory reset
- Install ROM and gapps
- Wipe cache / dalvik
- Fix permissions
I had an error message on Fix permissions.
Fix Permissions Complete
Failed
......
Updating partition details...
Can't check permissions after Factory Reset.
Please boot rom and try again after you reboot into recovery.
Done.
Not a big deal, just wanted to share the info. So maybe the initial CVD instructions were right after all!
Now I'll reboot and check if the ROM is working OK.
If CvD says it believe it. He knows more than you or I.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Is anybody else having issues depositing checks with bank of America app on this rom? I never had any issue with it on any other rom but here after I take the picture of the check it's like it's zoomed in and cropped so it says bad photo try again. I have tried searching for a solution everywhere but have come up with nothing. It's almost as if the app is using the camera incorrectly or something.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I understand, this is exactly what the error message tells me. But please continue reading this post. I'll try to explain what I tried to point out.
Yeah I know. From the contributors on this forum, cvd is probably the one I respect the most. He's respectful and always have a positive attitude. I am only trying to share what I experienced.
Please look at that extract from the op and read my comment under that.
If you look at the instructions from the op, you'll see that there is no step between wipe dalvik and fix permissions. As I stated, I got an error message and I completely understand why I got that.
I just wrote my previous post because if you look back in this thread, you'll see that someone was asking a question about when to perform the "fix permissions" step. Some posts were written and I know CVD edited the op.
What I am saying is that there is a missing step between the wipe and the fix permissions.
I read every post. I think I even remember CVD telling that we could fix permissions before the first boot. Not 100% sure though
. And I don't want to start a debate on that.As I wrote, it's not a big deal. It did not stop me, I was able to continue.
Keep up the good work. \m/
Sent from my Nexus 7 using xda premium
Not just you. Might be a 4.2.2 issue, I have it on this Rom and had it on another. Workaround is to put check in the top left corner. Takes some trial and error, but you can make it work.
lazer77
Senior Member
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
91
I am proud to present to you BeanStalk by Scott.Hart.Bti. This is a build composed off of the CM10.1 builds and including alot of features on top of it. So you get speed, stability, and ultra customization ability. Many of the additional code additions came from slim ROM and also Derteufels build and have been modified to work with my current setup. A huge thanks to Derteufel and the Slim ROM guys for their work and dedication. Also a big thanks to everyone involved with CM as that is the building stone in this project. Thanks to skyliner33v for the bootanimation and upcoming wallpapers!
I plan on updating this and adding features on a pretty regular basis, so if you happen to like this, keep checking back.
- CM11 based
- Lockscreen background options (Color fill, Custom image, Transparent)
- Customizable Lockscreen text color
- Lockscreen rotation
- Option to enable all widgets
- Minimize lockscreen challange
- Use widget carousel
- Slider Shortcuts
- Static Lockscreen shortcuts
- Lockscreen button actions
- LCD Density
- Scroll elasticity options
- Default App grip option
- Custom Carrier label
- Dual Pane options
- Customizable boot animation (off, default, set your own bootanimation)
- Custom original BeanStalk Wallpapers by skyliner33v
- Custom BeanStalk bootanimation by skyliner33v
- Status bar color and transparency
- Clock and date options which includes color, location, style
- Signal Styles which include color and text instead of icons, alternate GB signal layout, hide signal icons
- Breathing SMS option
- Battery styles - Includes specific colors and styles. Also includes battery bar
- Do not disturb option
- Show notification count
- Pie controls (need to have lockscreen background set to something other then default to work correctly (dont ask why) )
- Fully customizable navigation bar - Includes style, layout, color, nav rings, pretty much everything you can think of.
- Quick settings color settings, tiles per row, Quick pulldown, text color
- Notification shortcuts, behaviour, drawer style (customizable colors), toggle colors, longpress quicksettings icon to enable/disable toggles
- Keyboard and input method options which include disable full screen keyboard and auto rotate
- Kill app back button with customizable timeout values
- High end graphic effects option
- Option to disable/enable vibrate on expand for notifications alerts
- Low battery warning customizable options
- Recents RAM bar fully customizable with color styles
- Clock widget for LockClock including extra options to fully customize every feature of the lockclock
- Build.prop MOD options to enable/disable tweaks as preferred
- Less frequent Notification sounds options
- CRT screen off/on options to specify how the animation shows
- Enable/disable wake up on charge option
- Superuser fully embedded into the build and accessed from settings menu
- CM Performance options and features
- About BeanStalk option with links to github source and facebook for beanstalk. Also links to my twitter and donate.
- Insane amount of edits/tweaks/fixes to make this build absolutely fly
- Option to use a fully themable MMS packages. You can access from mms - settings - theme settings
- Numerous other options hidding throughout the build
AT&T Skyrocket Specific Release:
- Smart zipalign at boot
- SQLite optimization
- Tons of kernel enhancements
- Entire ROM built from source by wantowan2
- Click HERE for kernel information (for 4.2.2 v. only)
- NEW! with v.2.53
- Improved Touch Sensitivity
- GPU Tweak: 3D-320; 2D0-266,2D1-266
Thanks & Credit:
- Scott.Hart.Bti -- for making BeanStalk and releasing the source so the rest of us can build it
- CyanogenMod -- duh
- Team Chopsticks -- for making CM10.1 device repos working on the Skyrocket
- Team ROOK -- where it all started, get your build on!
- Car vs. Driver
- m4570d0n
- onlychevys
- roger_n
- prbassplayer
Trouble Alerts/Workarounds:Disable (uncheck) settings/sound/screen lock sound
-Action Overflow check-mark behavior setting not working. (always on)
-Touch Sensitivity setting in settings/device/advanced doesn't reflect choice. **workaround** Have manually decreased value (more sensitive)
***Please keep in mind that this is the initial release and bugs are to be expected. Before reporting bugs, please make sure you verify everything on your end and make sure you do a full wipe and format first to make sure it is a legitimate issue. I'm going to say this once and only once... I am doing this for fun. It is my CHOICE to share my work (and Scott's ROM) with everyone. If you decide that you do not like my work, good for you.. Move on and flash something else. I will not tolerate ungrateful people in my thread.***
Instructions :TWRP
- Download ROM
- Download GAPPS package
- Reboot into recovery
- TWRP: Swipe at the default Wipe Cache / Factory Resetetc... Note: Mandatory
- if you are flashing on top of a different rom.
- AND (Do not just stop at that default initial wipe where it says ...'this is all you will need')
- Press Advanced select System
- Format System
- Install ROM
- Flash Gapps.
- Download ROM
- Download GAPPS package
- Reboot into recovery
- GO--> Data/Factory Reset Note: Mandatory
- if you are flashing on top of a different rom.
- then Wipe cache
- Enter mounts and storage, select -Format /System. **Go Back**
- enter Advanced Folder --> wipe Dalvik cache. **Go Back**
- Flash ROM
- Flash Gapps.
- b) If you flashed ROM & Gapps all at once, Deal with Google reg dialog permit SuperSU* at pop up and get to it's settings
- If you want to flash Marla or Moretz kernels reboot again, wipe cache and dalvik first
- Dirty Flashers: (Flashing a ROM without doing a full proper wipe)
IF You really have to. Wipe Cache and Wipe Dalvik and FORMAT system folder.
Then Flash update (Not from some other ROM), flash Gapps then reboot.
~~~~~~~~~~~~~~~~~~~~~~~~~~~STOP! BELOW HERE IS EVERYTHING YOU NEED FOR 4.4-KITKAT~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~DO NOT MIX AND MATCH~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________BEANSTALK_______________________________________________________________
RECOVERY===>>> philz_touch_6.01.4-skyrocket.zip - 8.29 MB THANKS PHILZ!
<<<<<<<<<<<<<<<<K I T K A T>>>>>>>>>>>>>>>>>>
ROM - 4.4.4065-OC2-20141009
It's a bit of a rough transition into this one. Better you should drag your heals with recovery, GAPPS until, at least "I', get it sorted properly...
ROM - 4.4.4065-OC-20140925
ROM - MIRROR Try this link. As the main one below FOR 4.4.4050-OC-20140914 sucks.
https://www.androidfilehost.com/?fid=23622183712471633
ROM - 4.4.4050-OC-20140914
ROM - 4.4.4025-OC-20140827
ROM - 4.4.4010-OC-20140807
ROM - 4.4.4001-OC-20140708 Upstream CM/kernel updates
ROM - 4.4.4001 - OC(skip right by 4.4.3 to 4.4.4)
GAPPS - pa_gapps-modular-micro-4.4.4-20140629-signed.zip
ROM - 4.4.290 - OC **AKA - KATSTALK**
ROM - 4.4.285c - OC
ROM - 4.4.2781 - OC
ROM - 4.4.275 - OC
GAPPS - pa_gapps-modular-mini-4.4.2-20140417-signed
GAPPS - 11-17_GApps_Standard_4.4_signed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~STOP! BELOW HERE IS EVERYTHING YOU NEED FOR 4.3~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FOR NEW CM10.2/4.3 BASED VERSION OF BEANSTALK
First folow this which is directly from their new nightly thread,
NOTE! You MUST use the recovery provided at the install link otherwise you will boot loop! ....or, as of 25-08-13
***TWRP menues have changed for 4.3. Be careful to follow all wipe conditions for clean install.***
NOTE! You MUST wipe /cache, /data, and /system!! Also, make sure you install a 4.3-compatible gapps package.
The CyanogenMod team and TeamChopsticks would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Recovery:
Devhost:NEW CWM TOUCH RECOVERY v.6043!
ROMS:
These below are all with custom kernels. Still under development. Much better performance for usability and gaming.
***Browser is back with these too.
witmar22:http://d-h.st/u6Tv4.3.1015 (Updated: 27/10/2013) Code Name: 'witmar' (BeanStalk with 'Marla')**
witmo45:http://d-h.st/yTp v4.3.1015 (Updated: 27/10/2013) Code Name: 'witmo' - REBASE (BeanStalk with 'Moretz')** [OC-UVsupport]
Alternatively you can get all my stuff from Goo.im here==>http://goo.im/devs/beanstalk/sgh-i727
**NEW So you flashed one of the above Roms and wondered about how to configure the kernel to suit your needs?
Governors and IO-Schedulers Control 2 key aspects of how your dual core (hot plugging) CPU works. (Note. Only 'witmo' (Moretz) allows Over Clocking)
Some want speed no matter what kind of battery it uses. Some don't use games and need 'just a phone' and want to
conserve battery as much as possible. Here is your chance to tailor performance your way.
Going in to all of this is beyond the scope of this thread but here is the best one to help you decide....
http://xdaforums.com/showthread.php?t=1369817
These below are all with stock kernels. A little more stable but lack performance for gaming.
Devhost:http://d-h.st/kI5 v4.3.1009 (Updated: 15/10/2013)in-line and beanstalk update
(***please read at the top of post #2 regarding SELinux***)
GAPPS:
Devhost: http://d-h.st/2dB
You must be on one of these Radios
Flash Radio Twice W/out Cable Plugged In
[UCMC1] ATT OFFICIAL JB 4.1.2 .. By Mohan_kr
[UXUMA7] ROGERS OFFICIAL JB 4.1.2 .. By Mohan_kr
ACTIVE DEVELOPMENT ROM. IF YOU DID A FULL WIPE CLEAN INSTALL, THEN A LOG WOULD HELP.
PLEASE ATTACH LOG IN TEXT FORMAT TO A POST WITH A SHORT DESCRIPTION, THANKS.
Logcat app: https://play.google.com/store/apps/...sMSwxLDEsImNvbS5ub2xhbmxhd3Nvbi5sb2djYXQiXQ..
(Under log level, select 'warn', the 'x' at the top to clear data, then recreat the condition. Come back to the app, press pause then save as text)
Included Apps and Why They Are There:
*AdAway - Stops app ads and undo net chatter
*AlloyLightBlue - Theme
*BetterBatteryStats - Get control of apps battery usage and see wakelocks
*ES File Explorer - One of the best file manages. Because of removal of 'Mass Storage' usb interface -
this has excellent wifi/network/lan connectivity.
*Incredicontrol - To control Kernel Voltages & Fast Charge ability.
*noFrillsCPU - What you need to control kernel CPU settings. No more, no less.
*SD Increase - To override system cache settings. To say 2-3 MB (2048-3072 KB)
While I really appreciate peeps that like the ROM and want to say thanks for help I give,
in the interest in keeping the thread clean, using the Thanks button is a perfect way to do that. Thanks...
My Setup:
v.1.300 ~~~~~~~~~~~~~~~~~~~v.4.3.05
BeanStalk~~~~~~~~~~~~~~~~ BeanStalk v4.3.05
Kernel-Moretz 3.09 ~~~~~~~~~~~ Kernel-Moretz 4.3.0
Launcher- Nova ~~~~~~~~~~~~~ Nova
Governer- Badass ~~~~~~~~~~~~ Badass
I/O Scheduler- cfq ~~~~~~~~~~~~ cfq
Voltage-minus 25000 ~~~~~~~~~~ Default
across the board
SlimROM source can be found HERE
DerTeufel's source can be found HERE
BeanStalk source can be found HERE
Marla 4.2.2 source can be found HERE
Moretz/Marla 4.3 source can be found HERE
Special Thanks to the following. Without those, the enhanced user
experience brought by these custom kernels would be impossible.
Thanks guys and especially, @car vs driver !
*Team Chopsticks
*CyanogenMod
*Car vs Driver
*elbermu
http://www.youtube.com/watch?v=pr1IWxbsbhA
- Thanks for making this video for me 'Justin Thought'! -
59[ROM][JELLYBEAN][4.2.2] BeanStalk v1.240 with Marla v2.0.8.2 (Updated: 6.16.13)
Deleted - have fun with this wantowan2!29Ok guys, Update.
It seems that something of yet unknown origin has corrupted the CM10.2 source. I noticed it on one of my tests and it was confirmed later on. Could be kernel, recovery, file system. It's proving tough to figure out.
So basically we have to slow up a bit and wait.
The good news is that it shouldn't take too long. I'm still on one of my original builds with no major issues. Also, when this is resolved, I should be able to have a nice fresh BeanStalk 4.3.00 done and out to everybody within an hour or so of when the all clear is out. I'M READY!!! lol
Thanks everybody for hanging in there waiting for your new BeanStalk.26Well folks, got some good news and some bad...... The bad first???
Ok, development on Beanstalk/Android 4.2.2 has finalized. 1.300 is going to be a FINAL.
Good news???? Your all just going to have to settle for Beanstalk/Android 4.300!!!! lol
I have it booting and it looks good so far. Really good! Good by Camera and hello "Focal"!
TEASER!!!!!
