So, finaly here it is...
Release Notes:
------------------------------------------------------------------------------------
DarkForces Team HardSPL by bepe and Cotulla
Please read carefully before installing!
1) To install this HSPL there must be SPL 1.42.0000 on your device.
Otherwise the installation will fail!
To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version.
2) Features
- Disabled CID Check, so you can flash any official ROM without using a Gold Card.
- Security Level = 0, so you can use all the boot loader commands (for developers).
- This HSPL will not get overwritten when flashing a full NBH with SPL via RUU.
- No NBH signatures check, so you can flash unsigned ROM images.
3) Warranty Issues
Be warned, Installing HSPL may void your warranty.
If you need to send your device to a Repair Centre,
make sure that you uninstall HSPL!
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
5) Disclaimer
This product is free to use, but at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties of any kind are given.
We have tested our product on several devices and have not
found any problems with it.
DFT, bepe and Cotulla 2010.
[SIZE=5][COLOR=Red][B]MOD EDIT: Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR.[/B][/COLOR][/SIZE]
Thanks to:
Monkey, Laurentius26 and friends, Xmoo, tom_codon and Dutty for testing and support
------------------------------------------------------------------------------------
Troubleshooting:
22/03/2010
well, HSPL2 comes
To install/uninstall this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000 SPL 1.42.HSPL
SPL 1.62.0000
SPL 1.66.0000 SPL 1.66.HSPL
SPL 2.07.0000
SPL 2.08.0000 SPL 2.08.HSPL
Other versions are not supported. (They are rare however...)
Now you can uninstall HSPL via same program, you no longer need to flash rom from SD card!
In HSPL2 you can select which version of SPL you want to install in the device.
There included 6 SPLs:
OSPL 1.42, OSPL 1.66, OSPL 2.08 (Original SPL)
HSPL 1.42, HSPL 1.66, HSPL 2.08 (Hard SPL)
Remember that some ROMs have old SPLs, for example 2.10 ROM have 2.08 SPL, 1.72 ROM have 1.66 SPL and etc!
You can install any of them using HSPL2.
Disclaimer
This product is free to use, but at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties of any kind are given.
We have tested our product on several devices and have not
found any problems with it.
1024LEOs (from T-Mobile with 1024ROM) ARE NOT SUPPORTED
DFT: bepe and Cotulla 2010.
Thanks everyone for testing and support!
Release Notes:
------------------------------------------------------------------------------------
DarkForces Team HardSPL by bepe and Cotulla
Please read carefully before installing!
1) To install this HSPL there must be SPL 1.42.0000 on your device.
Otherwise the installation will fail!
To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version.
2) Features
- Disabled CID Check, so you can flash any official ROM without using a Gold Card.
- Security Level = 0, so you can use all the boot loader commands (for developers).
- This HSPL will not get overwritten when flashing a full NBH with SPL via RUU.
- No NBH signatures check, so you can flash unsigned ROM images.
3) Warranty Issues
Be warned, Installing HSPL may void your warranty.
If you need to send your device to a Repair Centre,
make sure that you uninstall HSPL!
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
5) Disclaimer
This product is free to use, but at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties of any kind are given.
We have tested our product on several devices and have not
found any problems with it.
DFT, bepe and Cotulla 2010.
[SIZE=5][COLOR=Red][B]MOD EDIT: Android / WP7 / MAGLDR don't support HSPL3.03/OSPL3.03.
You need HSPL2.08 to run Android / WP7 / MAGLDR.[/B][/COLOR][/SIZE]
Thanks to:
Monkey, Laurentius26 and friends, Xmoo, tom_codon and Dutty for testing and support
------------------------------------------------------------------------------------
Troubleshooting:
- I have SPL 1.42.666 on the device.... !!!! WAIT !!!! SPL 1.42.6666 is not the version of the SPL on your device!... it is the SSPL version. Most likely you have the needed 1.42.0000 SPL on the device, just try to install this HSPL if you need it. Don't worry, if there is not the right SPL on the device, then u will get an error message, but nothing will happen to your device
- "Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center", !!! Problem NOT related to HSPL !!! ... this means that you flashed a region protected rom... flash any other rom that has your region ID... or patch it
22/03/2010
well, HSPL2 comes
To install/uninstall this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000 SPL 1.42.HSPL
SPL 1.62.0000
SPL 1.66.0000 SPL 1.66.HSPL
SPL 2.07.0000
SPL 2.08.0000 SPL 2.08.HSPL
Other versions are not supported. (They are rare however...)
Now you can uninstall HSPL via same program, you no longer need to flash rom from SD card!
In HSPL2 you can select which version of SPL you want to install in the device.
There included 6 SPLs:
OSPL 1.42, OSPL 1.66, OSPL 2.08 (Original SPL)
HSPL 1.42, HSPL 1.66, HSPL 2.08 (Hard SPL)
Remember that some ROMs have old SPLs, for example 2.10 ROM have 2.08 SPL, 1.72 ROM have 1.66 SPL and etc!
You can install any of them using HSPL2.
Disclaimer
This product is free to use, but at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties of any kind are given.
We have tested our product on several devices and have not
found any problems with it.
1024LEOs (from T-Mobile with 1024ROM) ARE NOT SUPPORTED
DFT: bepe and Cotulla 2010.
Thanks everyone for testing and support!
Attachments
Last edited by a moderator: